Reliable F1 Series Manuel
Model F1-80 Pendent
Model F1-80 Upright
F1-80 Series Sprinklers Summary
Sprinkler
Model
K-Factor gpm/psi1/2
(lpm/bar1/2)
Max. Working Pressure
psi (bar) Listings & Approvals Orientation
Sprinkler
Identication
Number (SIN)
F1-80 8.0 (115) 175 (12)
250 (17) (cULus only)
cULus, FM, LPCB,
VdS, CE
Upright RA6222
Pendent RA6212
Table A
Features
• Standard coverage standard-response sprinklers
• Upright and pendent orientations
• Low prole, compact design
• Available in a wide variety of nishes
• Available as Intermediate Level sprinklers
Product Description
Reliable Model F1 series sprinklers are standard-response
standard spray automatic re sprinklers utilizing a 5mm glass bulb
thermal element.
Pendent sprinklers may be installed exposed or surface mounted
using escutcheons such as the Reliable Models B, C, or HB
(reference Technical Bulletin 204). When installed recessed, the
Model F1-80 series sprinklers are specically listed with and
may only be installed with listed Reliable recessed escutcheons.
Refer to the technical information on the following pages for
specic listings for recessed installations and refer to Figure 3 for
dimensional information.
When tted with an approved Reliable water shield, these
sprinklers may considered intermediate sprinklers for use
in racks, below grated walkways, and other areas where
intermediate level sprinklers are required.
Table A provides a summary of the approvals and availability
of specic Model F1 series sprinkler congurations. Additional
technical information for each sprinkler model is provided on the
following pages.
www.reliablesprinkler.com
K-factor 8.0 (115)
F1-80 Series
Standard-Response Sprinklers
Bulletin 062 June 2022
Model F1-80 Upright Sprinkler SIN RA6222
Technical Specications
Style: Upright
Threads: 3/4” NPT or ISO 7-R3/4
Nominal K-Factor: 8.0 (115)
Max. Working Pressure:
175 psi (12 bar)
250 psi (17 bar) (cULus only)
Material Specications
Thermal Sensor: 5mm Glass Bulb
Sprinkler Frame: Brass Alloy
Cap: Bronze Alloy
Sealing Washer: Nickel with PTFE
Load Screw: Copper Alloy
Deflector: Brass Alloy
Sprinkler Finishes
(See Table B)
Sensitivity
Standard response
Temperature Ratings
135°F (57°C)
155°F (68°C)
175°F (79°C)
200°F (93°C)
286°F (141°C)
360°F (182°C)
Guards & Shields
F-1 Guard (cULus)
F-2 Guard (FM)
F-3 Guard with Shield (cULus, FM)
Sprinkler Wrenches
Model W2
Model J (with guard installed)
Listings and Approvals
cULus
FM
LPCB
VdS
CE
Model F1-80 Upright Sprinkler Components and Dimensions Figure 1
Bulletin 062
June 2022
Page 2 of 6
www.reliablesprinkler.com
Model F1-80 Pendent Sprinkler SIN RA6212
Technical Specications
Style:
Pendent
Recessed Pendent
Threads: 3/4” NPT or ISO 7-R3/4
Nominal K-Factor: 8.0 (115)
Max. Working Pressure:
175 psi (12 bar)
250 psi (17 bar) (cULus only)
Material Specications
Thermal Sensor: 5mm Glass Bulb
Sprinkler Frame: Brass Alloy
Cap: Bronze Alloy
Sealing Washer: Nickel with PTFE
Load Screw: Copper Alloy
Deflector: Brass Alloy
Sprinkler Finishes
(See Table B)
Sensitivity
Standard response
Temperature Ratings
135°F (57°C)
155°F (68°C)
175°F (79°C)
200°F (93°C)
286°F (141°C) (1)
360°F (182°C) (1)
Recessed Escutcheons
Model F1 (cULus)
Model F2 (cULus, FM)
Model FP (cULus)
Guards & Shields(2)
F-2 Guard (FM)
F-6 Guard/Shield Kit (FM)
F-7 Guard (cULus)
F-8 Guard/Shield Kit (cULus)
S-2 Shield (cUlus, FM)
Sprinkler Wrenches
Model W2 (pendent)
Model W4 (recessed)
Model J (with guard installed)
Listings and Approvals(3)
cULus Listed
FM Approved
LPCB
VdS
CE
Notes:
1. 286°F (141°C) and higher temperature rated sprinklers not listed for recessed use.
2. Not suitable for use with recessed pendent installations.
3. When used surface mounted or exposed. See Recessed Escutcheon section for specic approvals when installed recessed.
Model F1-80 Pendent Sprinkler Components and Dimensions Figure 2
Bulletin 062
June 2022
Page 3 of 6
www.reliablesprinkler.com
Note: Please refer to Figure 3 for recessed installation.
Recessed Installation: Pendent Sprinklers Figure 3
FP Escutcheon F1 Escutcheon
(F2 Similar)
Bulletin 062
June 2022
Page 4 of 6
www.reliablesprinkler.com
Installation
Model F1 Series sprinklers must be installed in accordance with
NFPA13 and the requirements of all applicable authorities having
jurisdiction. Model F1 Series sprinklers must be installed with the
Reliable sprinkler installation wrench identied in this Bulletin. Any
other wrench may damage the sprinkler. The Models W2 and W4
wrenches have two sets of jaws. Use the smallest set of jaws that
t on the wrench flats of the sprinkler. A leak tight sprinkler joint
can be obtained with a torque of 8 to 18 lb-ft (11 to 24 N-m). Do
not tighten sprinklers over the maximum recommended installation
torque. Exceeding the maximum recommended installation torque
may cause leakage or impairment of the sprinkler.
Glass bulb sprinklers have orange bulb protectors or protective
caps to minimize bulb damage during shipping, handling and
installation. Reliable sprinkler installation wrenches are designed
to install sprinklers with bulb protectors in place. Remove the bulb
protector at the time when the sprinkler system is placed in service
for re protection. Removal of the bulb protector before this time
may leave the bulb vulnerable to damage. Remove bulb protectors
by undoing the clasp by hand. Do not use tools to remove bulb
protectors.
Standard Finishes Special Application Finishes
Sprinkler F1, F2 and FP(3) Escutcheons Sprinkler F1, F2 and FP(3) Escutcheons
Bronze Brass Electroless Nickel PTFE(4)(5) Bright Brass
Chrome Plated Chrome Plated Bright Brass(6) Black Paint
White Polyester(4) White Polyester Black Paint(7) Off White
Off White(7) Chrome Dull
Chrome Dull
Lead Plated(4)(8)
Wax Coated(4)(8)
Wax Over Lead(4)(8)
Notes:
1. Other nishes and colors are available on special order. Consult your Reliable sales representative for details.
2. Paint or any other coating applied over the factory nish will void all approvals and warranties.
3. The Model FP assemblies consist of a sprinkler mounted in a galvanized steel cup with a nished trim ring.
4. cULus Listed as corrosion resistant.
5. FM Approved as corrosion resistant.
6. For 200°F (93°C) maximum temperature rated sprinklers only.
7. cULus only.
8. Clear wax used on ordinary temperature rated sprinklers; brown wax used on intermediate temperature rated sprinklers. Brown wax may be used on
high temperature rated sprinklers where the ambient temperature does not exceed 150°F (66°C).
Sprinkler and Escutcheon Finishes(1)(2) Table B
Maintenance
Reliable Model F1 series sprinklers should be inspected and the
sprinkler system maintained in accordance with NFPA 25, as well
as the requirements of any Authorities Having Jurisdiction.
Prior to installation, sprinklers should remain in the original
cartons and packaging until used. This will minimize the potential
for damage to sprinklers that could cause improper operation or
non-operation.
Do not clean sprinklers with soap and water, ammonia liquid or
any other cleaning fluids. Remove dust by gentle vacuuming
without touching the sprinkler.
Replace any sprinkler which has been painted (other than factory
applied). A stock of spare sprinklers should be maintained to
allow quick replacement of damaged or operated sprinklers.
Failure to properly maintain sprinklers may result in inadvertent
operation or non-operation during a re event.
Wrenches
Model W2 (upright, pendent)
Model J (with guard installed)
Model W4
(recessed pendent)
Bulletin 062
June 2022
Page 5 of 6
www.reliablesprinkler.com
P/N 9999970502
Bulletin 062
June 2022
Page 6 of 6
www.reliablesprinkler.com
Guarantee
For the guarantee, terms, and conditions, visit www.
reliablesprinkler.com.
Ordering Information
Specify the following when ordering:
Model
• F1-80
Deflector/Orientation
• Upright
• Upright Intermediate
• Pendent
Temperature Rating
• See sprinkler technical specications
Sprinkler Finish
• See Table B
Recessed Escutcheon
• F1
• F2
• FP
Escutcheon Finish
• See Table B
Sprinkler Wrench
• Model W2 (upright and pendent)
• Model W4 (recessed)
• Model J (with guard installed)
Ce manuel convient aux modèles suivants
3
Table des matières
Autres manuels Reliable Système d'irrigation
Reliable
Reliable F3QR Manuel utilisateur
Reliable
Reliable F1-28 Series Manuel utilisateur
Reliable
Reliable DH56 HSW-PL Manuel utilisateur
Reliable
Reliable DDX PrePaK Manuel d'entretien
Reliable
Reliable JL-14 Manuel utilisateur
Reliable
Reliable RFC56 Manuel utilisateur
Reliable
Reliable F1-SS Series Manuel utilisateur
Reliable
Reliable G4 Manuel utilisateur
Reliable
Reliable JL-17 Manuel utilisateur
Reliable
Reliable G Series Manuel
Reliable
Reliable F3-80 Series Manuel utilisateur
Reliable
Reliable F1FR-FS LO Manuel
Reliable
Reliable F156 Series Manuel
Reliable
Reliable H PrePak Manuel d'entretien
Reliable
Reliable F1FR Manuel utilisateur
Reliable
Reliable DH56 HSW-PL Manuel utilisateur
Reliable
Reliable KFR56 Series Manuel utilisateur
Reliable
Reliable F1 Res 30 LL Manuel utilisateur
Reliable
Reliable J112 Pendent Manuel
Reliable
Reliable F1FR56 Manuel utilisateur
Manuels Système d'irrigation populaires d'autres marques
Hunter
Hunter Institutional Series Manuel utilisateur
Cellfast
Cellfast 52-305 Manuel utilisateur
Tyco Fire Product
Tyco Fire Product Star Galaxy SGQR Manuel utilisateur
Tyco Fire Product
Tyco Fire Product CENTRAL A Manuel utilisateur
Oral Care Technologies
Oral Care Technologies Hydro Floss Manuel utilisateur
Tyco Fire Product
Tyco Fire Product Gem F892 Manuel utilisateur
Toro
Toro 730 Series Guide rapide
Eden
Eden 97063-EDAMZ Manuel utilisateur
Tyco
Tyco TY-L Series Manuel utilisateur
Tyco Fire Product
Tyco Fire Product CENTRAL ELO-231 Manuel utilisateur
Johnson Controls
Johnson Controls tyco ESFR-17 Manuel utilisateur
Victaulic
Victaulic VicFlex I-VICFLEX.AQC-U Manuel utilisateur