REID LIFTING TESTDAVIT Instructions d'installation

REIDLIFTING.COM

Assembly & Operation Guide

Inspection 4

Introduction 6

Product Information and dimensions

Example of Test Davit Proof Load

Loading Required for Testing

Assembly Instructions 8

Assembling the Davit

Staht Device

Notes 14

Contents

Lightweight.

Portable. Safe.

Please read the following instructions and guidance

notes carefully, before using or operating the

system.

They contain important information about how to

handle and use the system in a safe and efﬁcient

way, avoiding danger, reducing repair costs and

downtime, and increasing the reliability and lifespan

of the system.

They apply for:

Operation, including preparation,

troubleshooting during operation and

cleaning

Maintenance, inspection, repair

It is the responsibility of the end user to adhere

to the Health & Safety and accident prevention

standards and legislation valid in their respective

countries and any regions in which the system is

being used. It is also incumbent on the user or

competent person to ensure that anyone working

with the equipment has the necessary medical and

physical capabilities. A rescue plan also needs to be

in place in the event of an emergency that could

occur during the work. This document should form

part of the overriding Risk Assessment and Method

Statement required for each lift.

Inspection

As part of a scheduled inspection the test davit

should be examined to ensure all components

are in good condition and function as intended.

Particular attention should be given to all hardware

and ﬁxing points as well as wear or deformation to

the king pin.

It should be noted that the king pin has an

interface which ensures the unit is unable to lift out

the socket as high loads are applied, this interface

can overtime show signs of wear, it is intended

that the king pin element of the test davit will

wear ﬁrst to protect the socket, the life of the king

pin will vary depending on the application and

test loads applied as such the king pin should

be inspected before each use to ensure that no

excessive wear has occurred. Regular rotation of

the king pin is prudent to stop repeated wear in

the same area.

If the king pin has become worn so that the

interface surface no longer offers a lip for the pin

to engage with the socket the king pin assembly

should be replaced.

Inspection

Portable Socket Test Davit from REID

Beam [10kg weight]

Shackle Point

R-Clip

Column [10kg weight]

Cheek Plates

Kingpin

1000 Radius

389 Max -

88.5 Min

557 Max -

265.5 Min

Ø 64

230

668

Product Information and Dimensions

Example of a custom goods only TDAVIT:

Loading Required for Testing

PPE

Radius* [mm] Service Load

[kN]

Load to apply

to Test Davit

[kN]

800 6 4.8

1000 6 6

1200 6 7.2

1600 6 9.6

Goods Only

Radius [mm] WLL [kg]

Load to apply

to Test Davit

[kN]

800 600 5.9

1000 500 6.2

1200 500 7.4

1600 375 7.4

2000 300 7.4

The REID Test Davit has been engineered to ensure

maximum safety standards can be met where ﬁxed sockets

are concerned. The Test Davit allows the user to test the

strength and stability of ﬁxed sockets up to 9.6kN.m.

*Radius relates to the length of the beam of the davit that is

used in the lifting operation and not the length of the test

davit beam.

WLL = 300kg or 2.94kN

Radius = 1600mm or 1.6m

Test Davit Proof Load

(2.94 x 1600 x 125%) = 5.88kN

For goods only the proof load is equal to the WLL x 125%.

Test Davit loading = radius x service load

300 x 9.81

(1000 )

The following instructions document how to correctly assemble the Test Davit using a top mount socket.

Appropriate PPE should be worn: Gloves Protective Footwear Hard Hat

Assembly Instructions

Once the Davit has been

assembled in place it is ready

for a device to be attached to

the shackle point or clevis pin

to begin the test.

Insert the column into the socket. Present the Davit beam to the column at the required

height.

Secure the Davit using the detent pins provided.

Depending on the device used for testing the

socket, pull or push up the Test Davit using the

necessary equipment to the required load.

12 3

4 5

The following instructions document how to correctly assemble a Staht anchor test

device with the REID TESTDAVIT to correctly test the force of the socket.

Appropriate PPE should be worn: Gloves Protective Footwear Hard Hat

Assembly Instructions - Staht Device

Table des matières

Autres manuels REID LIFTING Système de levage

REID LIFTING

REID LIFTING porta-gantry 500 Supplément

REID LIFTING

REID LIFTING PORTABASE PBHB00001 Instructions d'installation

REID LIFTING

REID LIFTING PORTADAVIT QUANTUM Instructions d'installation

REID LIFTING

REID LIFTING PORTADAVIT QUANTUM Instructions d'installation

REID LIFTING

REID LIFTING PORTAGANTRY 11000 Instructions d'installation

REID LIFTING

REID LIFTING PORTA-GANTRY 500-3000 Instructions d'installation

REID LIFTING

REID LIFTING PGRS20 Instructions d'installation

REID LIFTING

REID LIFTING PORTADAVIT QUANTUM PDQ 1 Instructions d'installation

REID LIFTING

REID LIFTING 3M Bracket Instructions d'installation

REID LIFTING

REID LIFTING PORTA GANTRY 1100 Instructions d'installation

REID LIFTING

REID LIFTING PORTA GANTRY Instructions d'installation

REID LIFTING

REID LIFTING PORTA-GANTRY 5000 Instructions d'installation

REID LIFTING

REID LIFTING porta-gantry 500 Instructions d'installation

REID LIFTING

REID LIFTING PORTAGANTRY RAPIDE US-PGRS20 Instructions d'installation

REID LIFTING

REID LIFTING PORTA-BASE Instructions d'installation

REID LIFTING

REID LIFTING Tuffbuilt Pro Series Instructions d'installation

REID LIFTING

REID LIFTING PORTA GANTRY Series Instructions d'installation

REID LIFTING

REID LIFTING porta-gantry 500 Instructions d'installation

REID LIFTING

REID LIFTING PGRS20 Instructions d'installation

REID LIFTING

REID LIFTING PGRS20 Instructions d'installation

REID LIFTING

REID LIFTING T-DAVIT Series Instructions d'installation

REID LIFTING

REID LIFTING PORTA-DAVIT 500 Series Instructions d'installation

REID LIFTING

REID LIFTING PORTAGANTRY 11000 Instructions d'installation

Manuels Système de levage populaires d'autres marques

morse

morse 82H-124 Manuel utilisateur

Braun

Braun NL955 Series Manuel utilisateur

haacon

haacon 1889.10 Manuel utilisateur

Protekt

Protekt AT 252 Manuel utilisateur

R. Beck Maschinenbau

R. Beck Maschinenbau HS 600 Manuel utilisateur

Nova Technology International, LLC

Nova Technology International, LLC NAS Series Manuel utilisateur

Genie

Genie Z-60/34 Manuel utilisateur

Screen Technics

Screen Technics INTERFIT Vertical Up Lift Manuel utilisateur

Mortuary Lift

Mortuary Lift ULTIMATE 1000 Manuel utilisateur

Custom Equipment

Custom Equipment Hy-Brid 3 Series Manuel de programmation

Custom Equipment

Custom Equipment Hy-Brid Lifts 2 Series Manuel de programmation

Hy-Brid Lifts

Hy-Brid Lifts HB-P3.6 Manuel de programmation

BERG

BERG BeNomic EasyLeaf Manuel utilisateur

Powermate

Powermate LiftGate LG-3 Manuel utilisateur

Snorkel

Snorkel TM12 Series Manuel utilisateur

Terberg

Terberg OMNIDEKA Manuel utilisateur

Harmar Mobility

Harmar Mobility AL625 Mode d'emploi

Rotary

Rotary SPO16 Manuel utilisateur