REFOX LM-40 Manuel utilisateur
Laser Machine LM-40
User Manual
（Please be sure to read this manual carefully before use）
Product
Introduction
LM-40 Mini is a small laser machine, dedicated to the
refurbishment of the rear cover glass of the mobile phone
repair industry. This laser machine is miniaturized, light-
weigh, suitable for a variety of scenarios, especially suitable
for use in repair store in shopping malls.
Product Dimensions
Features
Independently develop marking system
Automatic and real-time diagram updates of massive accurate drawings on the cloud
One-click accurate focus
Focal le ngth pins are highly accurate, intelligent sens e
Sundry usages availability
Can be us ed in di fferent s ceneries with a special a nti -smoke glas s cover
Featured high-speed galvanometer
Supports multi ple times o f etching 2 -5 times higher than an ordinary galvanomete r
Precise position function
The professio nal workbenc h makes y our equi pment p ositioning more accurate and has a larger
operating space
Space-saving size
Small d imensi on and lightweight structure avo id your desktop from being a mes s
Parameters
Product Name
Laser Machine
Brand
REFOX
Product Model
LM-40
Voltage
110V/220V
Product Power
≤ 800W
Laser Power
LM-40:6W
Marking Precision
≤0.001mm
Marking Speed
≤10000mm/s
Cooling Mode
Built-in cold air
Efficiency
5mins/piece
Marking
Width
0.05-0.1mm
Marking
Format
175mm*175mm
Marking Depth
0.015-0.5mm
Repeated
Measurement
≤0.001mm
Product Size
250 x 380 x 550mm
Package Size
52.5*35*61cm
Net
Weight
15KG
Gross Weight
22KG
Steps for Usage
1.
Connect the power supply and turn on the machine.
2.
Turn on the computer and install the software that comes with the
machine.
3.
Connect the machine and computer through the USB port.
4.
Place the item to be marked on the workbench and adjust the focus
using the one-click accurate focus function.
5.
Open the software and import the design to be marked.
6.
Adjust the marking parameters, including marking speed, marking
depth, and line width, according to the material and design to be
marked.
7.
Start the marking process by clicking the "marking" button in the
software.
8.
After the marking is completed, turn off the machine and computer
and disconnect the USB port.
Attention
1.
Donot modify the protective circuit of the machine and disassemble
the main parts of the laser machine at will;
2.
The laser marking machine is not allowed to run empty without
materials;
3.
If abnormal sound or other conditions occur during operation, turn off
the power and examine it immediately.
4.
Each component of the laser marking machine needs to be started
step by step according to the description;
（You will take your ownrisk if you do not follow the instructions ）
5.
Keep theworking environment clean and tidy;
6.
Keep the lens clean.
Table des matières
Autres manuels REFOX Instrument de mesure
Manuels Instrument de mesure populaires d'autres marques
Endress+Hauser
Endress+Hauser Proline Promag 50 Caractéristiques techniques
Siemens
Siemens SITRANS F Coriolis FCT030 Manuel de la liste des pièces
KLINGER
KLINGER CMF V Series Manuel utilisateur
EXFO
EXFO FTB-2 Manuel d'exploitation et d'entretien
Keysight
Keysight M8290A Manuel utilisateur
ADTEK
ADTEK MW-5 Manuel utilisateur