Redback 1L360R+ Manuel utilisateur
CONTENTS
User Safety 2
Introduction and 1L360R™ Accessories 3
1L360R™Diagram 4
Operating Instructions 6
Batteries 6
Power 7
Pulse Mode 8
LLR705 Receiver 9
Manual Mode 10
Mounting Options & Technical Specications 11
Warranty 12
User Safety
• Laser output sign lies near the output aperture.
• Do not stare directly into laser beam.
• Do not disassemble the instrument or attempt to
perform any internal servicing. Repairs and service
should be performed only authorised service
centres of Redback Lasers.
• This instrument complies with the safety
Classication standards of laser radiation.
2
1L360R CAUTION: Class 3r laser <5mW at 635nm.
Do NOT stare into laser beam or aim at another
person.
Follow relevant Australian Standards
Copyright © CMI LasersTM RedBack lasersTM and Level1LasersTM . All rights reserved CMI Industries Pty Ltd 2016
No artwork or photographs produced by CMI Industries Pty Ltd may be used copied or reproduced without the written consent
from CMI Industries Pty Ltd
3
1L360TM INTRODUCTION
Congratulations on purchasing one of the RedBack 1L360R™ Auto Levelling
360 horizontal line lasers. The 1L360R comes in a number of dierent
kits but the laser itself is the same in all. Please note that some of the
accessories described in this manual may not be included in the particular
kit you have purchased.
The 1L360R features a full horizontal 360oline which is highly visible for
indoor levelling jobs. For outdoor levelling use the LLR705 electronic receiver
which comes included in the 1L360R+ and 1L360+P kits. When using this
receiver the 1L360R can be operated outside up to 300m diameter, ideal for
all types of general levelling applications.
All the 1L360R kits comes with superior Li-ion rechargeable batteries
and charger as well as being able to operate with standard “AA” Alkaline
batteries.
The 1L360R laser features manual mode for setting on a manual slant if
required.
The 1L360R laser has mounting threads on its base for tripods and
accessories with either a 1/4” camera thread or 5/8” survey thread.
1L360R - Base Kit Includes
• a 1L360R Laser Unit
• Soft Carry Case
• Rechargeable Li-ion Battery & Charger
• Std Battery Compartment
• Instruction Manual
www.redbacklasers.com.au
1L360R+ - Base Kit plus
• LLR705 electronic Receiver
• Receiver Sta Clamp
1L360R+P - Base Kit plus LLR705 plus
• Heavy Duty Flat Top Tripod
• 2.4M Sta
4
1L360RTM DIAGRAMS
1L360R Laser Level
1
2
3
1. Laser Output Windows
2. Control Keypad
3. Pendulum Locking Knob
4. Battery Compartment
5. Tripod/Mounting Threads 5/8”, 1/4”
4
5
5
Keypad
www.redbacklasers.com.au
Power LED
Pulse Mode LED
Pulse Mode
Function Button
Manual Mode
Function Button
Manual Mode LED
1L360R+P kit with receiver, Tripod & Sta
6
1L360RTM OPERATING INSTRUCTIONS
Battery Instructions
To charge this battery pack simply insert the charger plug into the charging
socket on the Li-ion battery pack itself. The LED on the charger is illuminated
red during the charging process and will turn green once the battery is fully
charged.
When the power LED on the keypad ashes, the rechargeable battery pack
needs recharging or standard “AA” batteries need replacing. Note the
charger will only charge the supplied rechargeable battery pack.
Handy Hints
•
Prior to initial use, fully charge the rechargeable battery.
•
If when you insert a battery pack the laser does not power up try re-
loading the battery pack to make sure there is a good connection.
•
Remember the 1L360R can operate using standard “AA” batteries when
rechargeable pack is out of charge or charging.
•
When laser is not going to be used for an extended period of time it is
best to remove both “AA” and Rechargeable pack if installed.
The 1L360R has two battery options either 4 x standard “AA” size Alkaline
or the Li-ion rechargeable pack. For standard 4 x “AA” alkaline operation
simply insert “AA” batteries into standard battery holder in the direction
indicated and slide the holder into battery recess and close the battery
compartment cover.
To use the rechargeable
battery pack rst
remove standard pack
if inserted and place
into the same battery
recess in direction
indicated and close the
battery compartment
cover.
7
www.redbacklasers.com.au
Turning On the 1L360R
To power up, simply unlock the pendulum by moving it to the “ON” position,
this will automatically self level the laser and power up the horizontal beam.
If when you unlock the pendulum the laser beam ashes and a beeping
sound is emitted then the laser is out of self levelling range, place the laser
on a more level surface for the device to self level and power up.
To power down the laser level simply re-lock the pendulum by switching it
to the “OFF” Position.
Always transport the 1L360R laser level with the pendulum in the locked
“OFF” position to protect the device when not being used.
1L360RTM OPERATING INSTRUCTIONS cont.
8
1L360RTM OPERATING INSTRUCTIONS cont.
Pulse Mode
Pulse mode allows the 1L360R to be used with the LLR705 line receiver and
so allowing the laser to be used outside for general site levelling, patios,
decking etc.
With the 1L360R, pulse mode is automatically enable when powered up.
For maximum visible brightness indoors disable the pulse mode by pressing
the pulse “P” button, the LED above will go out. Disabling pulse mode will
give a brighter visible line but a receiver will no longer operate until pulse
is re-enabled. To re-enable pulse press the pulse “P” button once more.
9
www.redbacklasers.com.au
Laser Receiver LLR705 (Supplied with 1L360R+ and 1L360R+P kits)
The receiver can be used hand held or together with the sta clamp with a
sta. The LLR705 has a 1mm level zone for maximum accuracy.
• A press of the Power button on the receiver will turn on and o
the receiver.
• Pressing the Speaker button toggles speaker on and o.
The LLR705 has 3 LED light displays which indicate laser is above, below and
on level and a large LCD display which has a progressive display indicating
when the laser gets closer to the level mark. If the receiver is left turned on
without a laser being received it will auto power down after 10 minutes. For
picking up horizontal lines hold the receiver as shown below, for picking up
vertical lines place on its side.
Indicates laser beam is below
line - slide receiver down.
Indicates laser beam is above
line - slide receiver up.
Indicates laser beam is on the
line.
LED lights
duplicate LCD
results.
The RedBack LLR705 allows the laser beam to be picked up outside at up
to 150m radius in any lighting conditions. Ideal for decking, sheds, slabs,
framing and much more.
10 www.redbacklasers.com.au
Manual Mode
Manual mode allows you to turn on the 360 degree line with the pendulum
in the locked position and so allows you to set up a laser line at an angle
such as for installing balustrades. Manual mode is activated by pressing the
manual mode left button when the pendulum is in the locked “OFF” position.
The manual mode LED light will ash warning you that the laser is not self
levelling.
Unit featured is 3L360R in manual mode. Also pictured is an optional iet68 elevating tripod and
optional GD12 grade dial plate; a camera style tripod with pan and tilt will provide a similar result.
1L360RTM OPERATING INSTRUCTIONS cont.
Ce manuel convient aux modèles suivants
2
Table des matières
