RECOMEDIA KN-5YHW Manuel utilisateur
KN-5YHW
User Manual
Presentation made easy
Thank you for purchasing this product.
To receive latest update, please visit website
www.recomedia.co
RecoMedia
2
FEATURES
Wireless Presentaon
RecoMedia provides two modes of operaon. The rst mode allows presenter to
project desktop content by pressing “show” buon. The second mode allows a mod-
erator to synchronise all presentaons.
HDMI/VGA Output
You can connect either the HDMI or VGA port to a projector.
Recommendaon of opmal screen resoluon
Presenter will be recommended with opmal screen resoluon which best matches
the projector resoluon for clear presentaon quality
Dual Band WiFi
Presenter can connect to RecoMedia at 2.4 GHz or 5 GHz WiFi.
USB Host Support
You can connect and make presentaon from USB ash drive.
Web Viewer
Parcipants can view the current presentaon using any device which supports web
browser. Each presentaon screen can be saved onto their device for oine view-
ing.
Mobile Client
Users can also share photos, PDF documents and videos from smartphone or tablet
device installed with RecoMedia mobile app.
Session Control
You can perform Session Control by seng up WiFi password. Only users with WiFi
password can join the presentaon session.
FEATURES
3
SAFETY INFORMATION
SAFETY WARNINGS
TO REDUCE THE RISK OF ELECTIRC SHOCK, DO NOT REMOVE THE COVER (OR BACK).
NO USER-SERVICEABLE PARTS ARE INSIDE. REFER SERVICING TO QUALIFIED SERVICE
PERSONNEL.
WARNING : To reduce the risk of re or electric shock, do not expose this appliance
to rain or moisture.
CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLABE OF PLUG TO WIDE
SLOT, FULLY INSERT.
This apparatus shall always be connected to a AC outlet with a protecve
grounding connecon.
To disconnect the apparatus from the main socket, the plug must be pulled out
from the main socket.
CAUTION
Do not expose this apparatus to dripping or splashing. Do not put objects lled
with liquids on the apparatus.
To turn this apparatus o completely , you must pull the power plug out of the
wall socket.
This symbol indicates “dangerous volt-
age” inside the product that presents a
risk of electric shock or personal injury.
This symbol indicates important instruc-
ons accompanying the product.
CAUTION
RISK OF ELECTRIC SHOCK
SAFETY INFORMATION
4
PRECAUTIONS
Ensure that the AC power supply complies with the power requirement printed on
the label located at the back of the unit. This product can be installed by wall-
mounng or placed horizontally on a suitable base, with enough space around it for
venlaon (10~15 cm). Make sure that the unit is not covered blocking air ow for
venlaon. Do not put the unit on projector or other equipment which may become
hot. This product is designed for connuous use. To fully turn o the unit, by press-
ing the power buon and disconnect the AC plug from the wall outlet. Unplug the
unit if you intended to leave it unused for a long period of me.
During thunderstorms, disconnect the AC plug from the wall outlet. Voltage peaks
due to lightning could damage the unit.
Do not expose the unit to direct sunlight or other heat sources. This could lead to
overheang and cause the unit to malfuncon.
Protect the product from moisture and excess heat or equipment creang strong
magnec or electric elds. Disconnect the AC plug from the wall outlet if the unit
malfuncons. This product is not intended for industrial use. Condensaon may oc-
cur if the product has been stored in cold temperatures. If transporng the unit in
winter, wait approximately 2 hours unl the unit has reached room temperature
before using.
The baery used with this product contains chemicals that are harmful to the envi-
ronment. Do not dispose of the baery in the general household trash. Do not ex-
pose the baery to excess heat, direct sunlight, or re. Do not short circuit, disas-
semble, or overheat the baery. Danger of explosion if the baery is replaced incor-
rectly. Replace only with the same or equivalent type.
SAFETY INFORMATION
5
CONTENTS
CONTENTS
2 FEATURES
3 SAFETY INFORMATION
3 SAFETY WARNING
4 PRECAUTIONS
6 GETTING STARTED
7 DESCRIPTIONS
7 FRONT PANEL
7 BACK PANEL
8 CONNECT To PROJECTOR
9 STARTING UP
10 SOFTWARE INSTALLATION
11 CONDUCT PRESENTATION
11 FREE AND EASY MODE
12 MODERATED MODE
13 MOBILE APP
13 MOBILE APP INSTALLATION
14 STARTING MOBILE APP
15 SHARING IMAGES
16 SHARING VIDEOS
17 SHARING PDF DOCUMENTS
18 CONFIGURATION
19 CONTENT MANAGEMENT
20 UPLOAD FILES
21 DELETE FILES
22 DOWNLOAD FILES
23 TROUBLESHOOTING
24 PRODUCT SPECIFICATIONS
24 CONTACT
6
GETTING STARTED
BEFORE READING THE USER’S MANUAL
Note the following terms before reading the user manual.
Icons used in this manual
Safety Instrucons and Troubleshoong
1) Be sure to familiarise yourself with the Safety Instrucons before using this prod-
uct. (See page 2)
2) If a problem occurs, check Troubleshoong. (See page 14)
Copyright
©2016 EV-Dynamic Sdn. Bhd.
All right reserved; no part of this user’s manual may be reproduced or copied with-
out the prior wrien permission of EV-Dynamic Sdn. Bhd.
WHAT’S INCLUDED
Check for the supplied accessories shown below.
Icon Term Denion
Cauon Indicates a situaon where a funcon does not operate or seng may
be cancelled.
Note Indicates ps or instrucons on the page that help you operate a
funcon.
User Manual Power Cord Antenna DC Adapter
The appearance of the accessories may dier slightly from the illus-
traon above.
GETTING STARTED
7
DESCRIPTIONS
FRONT PANEL
DESCRIPTIONS
Power Buon USB Port
Audio In/Out LAN HDMI VGA DC In
BACK PANEL
8
CONNECT TO PROJECTOR
Please follow below steps:
1. Plug in power jack to DC in;
2. Connect video output to projector using HDMI or VGA port;
3. Plug in RJ 45 cable to LAN port to provide internet access (oponal);
4. Connect Audio Out to exisng audio system (oponal).
Before connecng to projector please power o the unit and projec-
tor, pull the plug out from wall outlet.
Connect to
audio system
Connect to
network
Connect to
projector
Connect to
DC Adapter
CONNECT PROJECTOR
9
STARTING UP
The unit can be powered up by pressing Power Buon located at the front panel.
The start up process may take around 1 minute. When the following screen is
showed then the unit is ready to use.
STARTING UP
10
SOFTWARE INSTALLATION
RecoMedia soware is needed before a PC/MAC can use the unit to perform
presentaon wirelessly.
Please follow steps below for soware installaon:
1. Ensure that the computer is connected wirelessly to RecoMedia.
2. Launch your web browser and enter the IP address 192.168.10.1 .
3. Then the screen below will be displayed.
4. Click the “DOWNLOAD” buon to download your soware. The soware is com-
pable with Windows 7 and above, and Mac OS X computers.
5. Once the downloading is completed, run the program to install RecoMedia so-
ware.
6. Once installed, RecoMedia icon will appear on desktop.
SOFTWARE INSTALLATION
Table des matières
Manuels Projecteur populaires d'autres marques
Panasonic
Panasonic PTL735NTU - LCD PROJECTOR-NETWORK IB Manuel utilisateur
NEC
NEC NP600S EDU Manuel utilisateur
BenQ
BenQ SH753P Manuel utilisateur
Eiki
Eiki EK-623U series Manuel utilisateur
Epson
Epson PowerLite Pro Cinema 6020UB Manuel utilisateur
Epson
Epson PowerLite Home Cinema 705HD Manuel utilisateur
