Really Good Stuff Vertical Storage Rack Manuel utilisateur

screw

rubber

rings

edged

end

screw

Attach the straight part of the

remaining assembled stabilizer

piece to the bottom holes on the

2 side frames with 2 rubber rings

I and 2 large screws H. Attach

the edged end of the assembled

stabilizer bar to the side frame with

a short screw F.

Attach the horizontal bar Dto the

bottom front of the assembled unit

with 2 rubber rings I and 2 large

screws H.

Locate the top of the fabric panel

L. Thread a pouch bar E through

the closed seam at the top, making

sure the seam is at the bottom.

Attach the bar to the holes at

the top of the unit with 2 medium

screws G.

Continue sliding the remaining

pouch bars through the seams in

the panel and attach the bars to

the frame sides.

screw

rubber

rings

screw

rubber rings

close-up view

screw

close-up view

rubber rings

Logo on front of

bottom panel

Vertical Storage Rack Assembly Instructions

164217 Assembly.indd 1 6/2/17 12:10 PM

All instructional guides can be found online.

Congratulations on your purchase of

this Vertical Storage Rack.

Screw the 4 adjustable feet Jinto the

legs of the 2 side frames A.

Attach a stabilizer tube Cto a

horizontal bar B at the side hole

with a short screw F. Repeat for the

remaining tube Cand horizontal bar B.

Attach the straight part of an

assembled stabilizer piece to the top

holes on the 2 side frames with 2

rubber rings I and 2 large screws H,

making sure the threaded holes on

the side frames face inside. Attach

the edged end of the assembled

stabilizer bar to the side frame with a

short screw F.

A– 2 Side frames

B– 2 Horizontal bars

with holes

C– 2 Stabilizer tubes

D– 1 Horizontal bar

E– 9 Pouch bars

F– 4 Short screws

G– 18 Medium screws

H– 6 Large screws

I– 6 White rubber rings

J– 4 Adjustable feet

K– 2 Assembly tools

L– Fabric panel

This Really Good Stuff®product includes:

AE H

CDF G

You may also have received a spare part of each piece of hardware.

Wait until assembly is complete before fully tightening screws.

ChokeWarning_D.pdf 1 6/2/16 11:00 AM

A A

screw

rubber

rings

edged

end

screw

rubber rings

close-up view

Vertical Storage Rack Assembly Instructions

164217 Assembly.indd 2 6/2/17 12:10 PM

Ce manuel convient aux modèles suivants

Autres manuels Really Good Stuff Support et étagère

Really Good Stuff

Really Good Stuff Really Good Book Exhibit Stand Manuel utilisateur

Really Good Stuff

Really Good Stuff Active Learning Center 163552 Manuel utilisateur

Really Good Stuff

Really Good Stuff Classroom Mail Center Manuel utilisateur

Really Good Stuff

Really Good Stuff 158589 Manuel utilisateur

Really Good Stuff

Really Good Stuff 159790 Manuel utilisateur

Manuels Support et étagère populaires d'autres marques

Salamander

Salamander Acadia AC/W/L400/WH Manuel utilisateur

Fohhn

Fohhn VAT-09 Guide de l'utilisateur

ricoo

ricoo FS0522 Manuel utilisateur

AMSOIL

AMSOIL BMK-22 Guide rapide

Kargo Master

Kargo Master 48220 Manuel utilisateur

Milestone AV Technologies

Milestone AV Technologies SIMPLICITY SLF2 Manuel utilisateur

ricoo

ricoo S1222 Manuel utilisateur

Ready-Set-Mount

Ready-Set-Mount RSMCM602 Manuel utilisateur

VidaBox

VidaBox VB MNT FFS2 Manuel utilisateur

Welch Allyn

Welch Allyn 48960 Manuel utilisateur

Arkon

Arkon CM035-ST-2 Manuel utilisateur

PROEL

PROEL PLWIN60C Manuel utilisateur

Agilent Technologies

Agilent Technologies E2609B Manuel utilisateur

Mustang

Mustang MV-ARM4 Manuel utilisateur

Mounting Solutions

Mounting Solutions WRM-320 Manuel utilisateur

Pyle

Pyle PMKSPAD1 Manuel utilisateur

ShelterIt

ShelterIt 21208 Manuel utilisateur

SPL

SPL RackPack?4 1040 Manuel utilisateur