RCT Power 3.8 Manuel utilisateur

MANUAL

Power Battery 3.8 / 5.7 / 7.6 / 9.6 / 11.5

Manual 3.8 / 5.7 / 7.6 / 9.6 / 11.5

Manufacturer

RCT Power GmbH

Line Eid Str. 1

78467 Constance, Germany

Phone. Tech. Service: +49 7531 996 77 333

Mail: info[at]rct-power.com

Subject to technical changes without prior notice.

No part of these operating instructions Power Battery 3.8 / 5.7 / 7.6 / 9.6 / 11.5 may be

reproduced in any form (photocopy, microfilm or any other process) or processed, duplicated or

distributed using electronic systems without the written consent of the. In the event of

infringement of this provision, we reserve the right to claim damages.

The reproduction of common names, trade names, brand names, product designations, etc. in

these operating instructions Power Battery 3.8 / 5.7 / 7.6 / 9.6 / 11.5 does not entitle the user to

consider and use such names as free within the meaning of trademark and brand protection

legislation

document number:

01/2022

 
Manual 3.8 / 5.7 / 7.6 / 9.6 / 11.5 
 
 
 
II 
 
Table of content 
 
 
1Overview ......................................................................................................................................1 
1 Scope of this document........................................................................................................................................... 1 
2 Intended use............................................................................................................................................................ 1 
3 Explanation of symbols............................................................................................................................................ 2 
4 Warranty and liability.............................................................................................................................................. 3 
5 Declaration of conformity ....................................................................................................................................... 3 
6 Application Example................................................................................................................................................ 4 
7 Scope of delivery ..................................................................................................................................................... 5 
7.1 Power Battery Master ............................................................................................................................................. 5 
7.2 Power Battery Stack ................................................................................................................................................ 6 
8 Module description ................................................................................................................................................. 6 
8.1 Power Battery Master ............................................................................................................................................. 6 
8.2 type plate................................................................................................................................................................. 7 
8.3 Power Battery Stack ................................................................................................................................................ 7 
2Safety instructions.........................................................................................................................8 
1 Symbols ................................................................................................................................................................... 8 
2 Personnel and qualifications ................................................................................................................................... 8 
3 Basic safety instructions .......................................................................................................................................... 9 
3Mechanichanical Assembly..........................................................................................................10 
1 Preparing the installation site ............................................................................................................................... 10 
2 Setting up the battery system ............................................................................................................................... 12 
4Electrical Installation...................................................................................................................15 
1 Earthing the components ...................................................................................................................................... 15 
2 Establishing a network connection........................................................................................................................ 16 
3 Establishing the DC connection ............................................................................................................................. 17 
4 Preparing the connection to the Power Storage ................................................................................................... 17 
5 Aligning the Power Battery and attaching it to the wall ....................................................................................... 18 
6 Connection to the Power Storage ......................................................................................................................... 18 
6.1 Power Storage DC 4.0 / 6.0.................................................................................................................................... 19 
6.2 Power Storage DC 8.0 / 10.0.................................................................................................................................. 19 
6.3 Power Storage AC.................................................................................................................................................. 19 
5Commissioning............................................................................................................................19 
6Operation ...................................................................................................................................20 
1 Normal operation .................................................................................................................................................. 20 
2 Troubleshooting .................................................................................................................................................... 20 
3 Periodic maintenance............................................................................................................................................ 20 
7Storage, cleaning and disposal.....................................................................................................21 
1 Storage .................................................................................................................................................................. 21 
2 Cleaning................................................................................................................................................................. 21 
3 Disposal ................................................................................................................................................................. 21 
8Technical Data.............................................................................................................................22 
 

Manual 3.8 / 5.7 / 7.6 / 9.6 / 11.5

1Overview

1.1 Scope of this document

This instruction manual is an important part of the battery system Power Battery 3.8 / 5.7 / 7.6 / 9.6 / 11.5. It contains

information about working safely and efficiently with the battery system.

Always keep the operating instructions near the battery system.

Persons who carry out maintenance or service work on the battery system must always have access to the instructions and

information in this operating manual.

Read the operating instructions before installing the system. Pay particular attention to the safety instructions.

This operating manual contains information on the installation, wiring, commissioning and operation of the battery system.

This document does not replace any laws, regulations, rules, standards or conventions.

1.2 Intended use

The battery systems Power Battery 3.8 / 5.7 / 7.6 / 9.6 / 11.5 are stationary battery systems with lithium-iron-phosphate

accumulators (LiFeP04).

A Power Battery in combination with a Power Storage forms a Power Storage System that stores the generated PV energy

intelligently and highly efficiently and makes it available to the consumer again according to economic aspects.

The Power Battery has not been developed for other applications or connections to other devices.

Any use that differs from the intended use is considered misuse. RCT Power GmbH is not liable for any damage resulting

from misuse.

Any misuse will terminate the manufacturer's warranty, guarantee and general liability.

Manual 3.8 / 5.7 / 7.6 / 9.6 / 11.5

1.3 Explanation of symbols

The following symbols may appear on the type plate and/or on the unit. These symbols must always be observed:

Observe the operating instructions!

Acid traces in the eyes or on the skin clean with lot of clear water.

Then consult a doctor immediately!

Wash contaminated clothing with plenty of water.

Fire- extinguisher for abatement from initial fire.

Warning!

Metal parts of the batteries are always under voltage.

Do not short-circuit the batteries!

In case of a short-circuit, may flow very high currents and cause burns.

By Touching conductive parts can cause cardiac arrhythmia and shock.

Explosion risk!

It is strictly forbidden to clean with synthetic cloths or a feather duster. Otherwise there is the risk of

electrostatic charging or discharging.

Electrolyte is highly corrosive!

In normal operation, contact with the electrolyte is not possible.

In the case of destruction of the housing, the liberated bound electrolyte is just as corrosive as liquid

electrolyte.

Warning of battery hazards.

Battery must not get wet.

Defective battery must not be operated.

Caution!

Children should be keep away from the battery system.

This product must not be disposed of as normal household waste, → Chapter 7 "Storage, cleaning

and disposal", page 21

CE-declaration of conformity

Manual 3.8 / 5.7 / 7.6 / 9.6 / 11.5

1.4 Warranty and liability

The warranty and liability shall be governed by the terms and conditions set out in the contract.

Limits of warranty

Warranty and liability claims of any kind are excluded by one or more of the following causes:

•Improper use or installation of the product.

•- Installing or operating the product in an unauthorised environment.

•- Ignoring relevant safety regulations at the place of use, during installation and commissioning.

•- Ignoring safety notices and instructions in all documents relevant to the product.

•- Installing or operating the product under incorrect safety or protective conditions.

•- Modifying the product or installing software without authorisation.

•- Defects in the product caused by neighbouring devices or devices operated outside the permissible limits.

•- Damage due to force majeureSchutzrechte

Property rights

All rights to drawings, software and other documents as well as any power of disposal, such as copying and passing on

rights, are held by RCT Power GmbH .

Storage

RCT Power GmbH does not accept any warranty for damage caused by incorrect storage, → chapter 7.1 "Storage", page 21.

Transport

We would like to point out that improper transport does not entitle the user to any replacement or warranty claims. In any

case, please consult RCT Power GmbH before transporting the system.

1.5 Declaration of conformity

The company RCT Power GmbH hereby declares, that the described battery system in this document is in accordance with

the essential requirements and the other relevant provisions of the guidelines below.

•Directive 2014/35/EC (Low Voltage Directive )

•Directive 2014/30/EC (Electromagnetic Compatibility, EMC)

•Directive EU 2011/65/EU (RoHs-directive

For a detailed EU declaration of conformity, please visit: http://www.rct-power.com.

Manual 3.8 / 5.7 / 7.6 / 9.6 / 11.5

1.6 Application Example

Abb. 1: Example of a PV system with Power Battery, Power Switch and Power Sensor

Pos.

Beschreibung

Bemerkung

PV-Generator

Monocrystalline silicon; polycrystalline silicon and thin-film without grounding and

protection class II

Battery

Power Battery 3.8 / 5.7 / 7.6 / 9.6 / 11.5

Inverter

Power Storage 4.0, 6.0, 8.0, 10,0

Household

Household appliances

Power Switch

In the event of a mains failure, the system switches to island mode

Power Sensor

Current sensors for recording the alternating current powe

Utility grid

TT, TN-C, TN-S, TN-C-S ( gilt für Gesamtsystem )

Manual 3.8 / 5.7 / 7.6 / 9.6 / 11.5

1.7 Scope of delivery

Before shipment our products are checked for proper condition.

Despite careful packaging, transport damage can occur, for which the transport company is generally responsible.

If you notice any damage to the packaging or the PowerBattery, please immediately inform the transport company.

Every Power Battery consists of 1 Power Battery Master and 2 to 6 Power Battery Stacks:

Version Power Battery

number Power Battery Master

number Power Battery Stacks

3.8 kWh

1 Karton

2 Kartons

5.7 kWh

1 Karton

3 Kartons

7.6 kWh

1 Karton

4 Kartons

9.6 kWh

1 Karton

5 Kartons

11.5 kWh

1 Karton

6 Kartons

1.7.1 Power Battery Master

Pos.

Beschreibung

1x Power Battery Master

1x Wall bracket used to fix the upper part of the battery onto the wall

2x Handle

1x base plate (adjustable), with earth protection connector

1x Manual Power Battery (this document)

1x Accessory packaging with:

- 1x PV-Stick + (Weidmüller)

- 1x PV-Stick - (Weidmüller)

- 1x Terminating resistor (RJ 45)

- 1x Patch cable RJ 45/Cat5e 5m

- 1x Ring terminal (for 6mm² cable) for grounding

Manual 3.8 / 5.7 / 7.6 / 9.6 / 11.5

1.7.2 Power Battery Stack

Pos.

desscription

1x Power Battery Stack

1x Patch cable RJ 45/Cat5e 15 cm

1.8 Module description

1.8.1 Power Battery Master

The DC cables to the power storage and to the lowest

stack are already attached to the master at the factory.

DC cable (+) to the Power Storage

DC cable (-) to the Power Storage

Connector for DC cable (-) from top stack

RJ45 socket for network cable to Power Storage

PE connection for protective conductor

On / Off switch

Openings for stacking on the top stack

LED status display

Type plate

RJ45 socket for network cable to top stack

DC cable (+) to the bottom stack

Manual 3.8 / 5.7 / 7.6 / 9.6 / 11.5

1.8.2 type plates

The type plates show the serial number (1) of the component, as well as information (2) on the voltages occurring in the

component and the IP protection class.

Explanation of symbols → Chapter 1.3 "Explanation of symbols", page 2.

1.8.3 Power Battery Stack

DC cable to the stack above, at the top stack to the master

RJ45 socket for network cable to stack above it

PE protective conductor

Connector for DC cable from stack below,on the lowest stack

from the master

type plate

RJ45 socket for network cable to the stack below,at the lowest

stack for the terminating resistor

Openings for stacking on the stack below, on the bottom stack on

the base plate

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels RCT Power Accessoires pour appareils photo

RCT Power

RCT Power Power Battery 5.7 Manuel utilisateur

Manuels Accessoires pour appareils photo populaires d'autres marques

Viltrox

Viltrox EF-NEX Instructions d'installation

Calumet

Calumet 7100 Series CK7114 Manuel utilisateur

Ropox

Ropox 4Single Series Manuel utilisateur

Cambo

Cambo Wide DS Digital Series Mode d'emploi

Samsung

Samsung SHG-120 Manuel utilisateur

Ryobi

Ryobi BPL-1820 Manuel d'utilisation

Aegis

Aegis ABL-36020P Manuel utilisateur

Pentax

Pentax Data Back Fc Manuel utilisateur

Fantasea

Fantasea EyeGrabber F Series Manuel utilisateur

Honeywell

Honeywell HDZ20HD Manuel utilisateur

EGO

EGO BA1400T Manuel utilisateur

Sima

Sima SRW-62 Manuel utilisateur

Shape

Shape A7SSMKIT Manuel utilisateur

Slide Kamera

Slide Kamera HST-2 Manuel utilisateur

Power works

Power works 2902613 Manuel utilisateur

SES

SES SE-2047-2 Manuel utilisateur

Olympus

Olympus PT-EP05L Manuel utilisateur

Starlite

Starlite OctoDome nxt Manuel utilisateur