RCA P50 Manuel utilisateur

Mini Projector User’s Guide

Model P50

Please read this manual before

Table of Contents

1. Table of Contents---------------------------------1

2. Warnings-----------------------------------------2

3. Accessories---------------------------------------4

4. Overview-----------------------------------------5

5. Remote Control Functions-------------------------6

6. General Operation---------------------------------7

a. Startup and Shutdown------------------------7

b. Positioning-----------------------------------7

8------- ----------------------ecnatsiDworhT/sucoF.c

d. A/V Input------------------------------------9

9------ ----------------------------------tupnIAGV.e

7. Settings Menu------------------------------------10

9. Maintenance-------------------------------------12

10. Trouble Shooting---------------------------------13

11. Other--------------------------------------------14

12. Warranty----------------------------------------15-17

WARNINGS

Important Safety Instructions

1. Read these instructions.

2. Keep these instructions.

3. Observe all warnings.

4. Follow all instructions.

5. Do not use the projector near water.

6. Clean only with dry cloth.

7. Do not block any ventilation openings. Use in accordance

with the manufacturer’s instructions.

8. Do not use near any heat sources such as laptops, radiators, heat

that produce heat.

9. Protect the power cord from being walked on or pinched

particularly at plugs, convenience receptacles, and the point

where they exit from the apparatus.

11. Unplug the projector during lightning storms or when

unused for long periods of time.

Warning: To reduce the risk of electric shock, do not remove

the cover or back, do not expose the projector to rain or

moisture. There are no user- serviceable parts inside. Refer

required when the projector has been damaged in any way,

such as when a power-supply cord or plug is damaged, liquid has

been spilled or objects have fallen into the projector, the

projector has been exposed to rain or moisture, does not

operate normally, or has been dropped.

13. The projector should not be exposed to dripping or splashing

placed on the projector.

14. The projector should be used in a well ventilated area to prevent

overheating.

should

12.

Accessories

Remote Control Power Adapter

Composite A/V Cable VGA Cable

Carrying Bag Rubber Stand

Lens

Focus Adjustment

Overview

Front View

Rear View

Power Button

Power Supply

Receptacle

A/V Input

VGA Input

Switching signal source

Volume Up/ /

Horizontal/Mirror image

Menu/Enter

Volume Down/ /

Menu=Enter, Ok

Volume Up

Volume Down

Exit

Mute Sound

Horizontal

Mirror Image

Remote Control Functions

Switch Signal Source

Horizontal Alignment

Vertical Alignment

General Operation

Startup and Shutdown

Startup - Connect the power supply or external battery to the rear

power receptacle. Press the power button to turn on.

Shutdown - Press the power button, and the optical engine will

unit. Please do not unplug the projector until fan has stopped.

Positioning

Position projector level with the wall, screen or other surface on which you

will projecting the image. Make sure the projector is at a right angle to the

wall or screen, or the image will appear distorted.

Power Button

Power Receptacle

t nt

Diagonal

size

(inch)

Vertical

size

(mm)

Horizontal

size

(mm)

Throw

distance

(mm)

100

1016

1270

1524

1778

2032

2286

2540

762

610

762

914

1067

1219

1372

1524

457

813

1016

1219

1422

1626

1829

2032

610

1666

2083

2499

2916

3332

3749

4166

1250

Diagonal

size

(mm)

Focus Adjustment/Throw Distance

The focus can be adjusted by turning the wheel located at the front of the

projector. The projector is capable of the following throw and focus

distances:

Focus

Adjustment

Focus Dial

INSERT CABLE INTO

3.5MM A/V PORT AS SHOWN

A/V Input

The Projector contains an A/V (Audio/Video) line-in port. You can connect

to any device which comes with A/V output function. These sources are

connected through a 3.5mm A/V cable (Included).

To connect with an A/V cable, insert the 3.5mm portion into the A/V port

of the projector. Press the power button and the projector will initialize.

VGA Connection

An extended desktop screen will be displayed when connecting to any

device with a standard VGA display port (15 pin).

Table des matières

Autres manuels RCA Projecteur

Manuels Projecteur populaires d'autres marques

iEmmet

iEmmet MP-312 Manuel utilisateur

Epson

Epson VS400 Manuel utilisateur

Sony

Sony VPL-HS10 Marketing Specifications & Features Manuel utilisateur

Sony

Sony VPL-HW65ES Manuel de service

Toshiba

Toshiba TLP-791U Manuel utilisateur

Philips

Philips LC1341 Guide de référence

Panasonic

Panasonic PTL735NTU - LCD PROJECTOR-NETWORK IB Manuel utilisateur

NEC

NEC NP600S EDU Manuel utilisateur

BenQ

BenQ SH753P Manuel utilisateur

Eiki

Eiki EK-623U series Manuel utilisateur

Epson

Epson PowerLite Pro Cinema 6020UB Manuel utilisateur

Epson

Epson PowerLite Home Cinema 705HD Manuel utilisateur

Christie

Christie LHD700 Manuel utilisateur

Navitar

Navitar FX Manuel utilisateur

InFocus

InFocus LitePro 560 Manuel utilisateur

Sony

Sony SRX-R815P Manuel utilisateur

Vivitar

Vivitar DP1500 X Manuel utilisateur

Acer

Acer C20 Series Manuel utilisateur