Raptor 9764491 Manuel utilisateur

raptor-products.com 1

Prod. No. 9764491

raptor-products.com

ROTATIONS LASER

RED CLASS 2

Rotationslaser rød

Rotasjonslaser rød

Rotationslaser röd

Pyörivä laser, punainen

2ROTATIONS LASER RED CLASS 2

Supplied with:

• Rotations Laser 9764491

• Receiver FR 45 with clamp for levelling staff

• Rechargeable battery and charger

• Padded bag

• User manual

Characteristics:

• Working range up to a diameter of 400 meters

• Dust / water protection IP 54

• Permanent 90° plumb-beam

• Automatic TILT alarm function

• Auto-shut-off when out of level

• Manual mode

Technical data

Self-levelling: horizontal / vertical

Self-levelling range: ± 5°

Laser class: 2

Accuracy horizontal: ± 1,0 mm / 10 m

Accuracy vertical: ± 1,5 mm / 10 m

Working range w/FR 45 (diameter): 400 m

Permanent 90° plumb beam: yes

raptor-products.com 3

TILT mode: yes

Manual mode: yes

Rotating speed: 600 rpm

Power supply / operating time: 20 h (NiMH)

Temperature range: -20°C - +50°C

Dust / water protection: IP 54

Power supply:

NiMH battery pack.

Mount the rechargeable battery box into the rotations laser.

Charging the battery

Connect the charger with the charging plug of the instrument and the power

source. If the charging LED is red the battery is being charged; if the LED is

green the battery is fully charged.

Attention

The rechargeable battery can be charged if it is

in the instrument or if it is outside.

Battery status indication:

If the ON/OFF LED on the unit ashes,

the battery has to be recharged.

4ROTATIONS LASER RED CLASS 2

Features:

1. Laser emitting window

2. Rotating head

3. Handle

4. Battery compartment

5. Keypad

6. Support for vertical use

7. 5/8“ thread hole vertical

8. 5/8“ thread hole horizontal

9. Charging plug

Operation:

Horizontal use

Set up the instrument on an even surface or mount it onto a tripod.

Vertical use

Set up the instrument vertically (on the side with the vertical 5/8“ hole)

or mount it onto a tripod with its vertical 5/8“ thread.

raptor-products.com 5

Horizontal use

After powering on the unit a ashing laser diode indicates that the automatic

self-levelling procedure is working. The laser starts rotating when it is self-

levelled. If not the laser was set up outside of its self-levelling range. In this

case set up the instrument on a more even surface.

6. 4.

1. ON/OFF button

2. ON/OFF LED

3. MANUAL button

4. MANUAL LED

5. TILT LED

6. TILT button

POWER ON/OFF (1)

Power the laser on/off with button (1). If the red ON/OFF LED (2) is illuminated

the laser is powered on. First the laser dot is ashing, then the self-levelling

procedure starts automatically; meanwhile the TILT LED (5) is ashing. When

the self-levelling procedure is completed the laser rotates with 600 rpm and

the TILT LED (5) is illuminated permanently (= TILT function activated).

If in normal use the ON/OFF LED (1) ashes the battery has to be recharged.

TILT MODE (6)

After completion of the self-levelling procedure the TILT mode is automatically

enabled. If the level is now disturbed the rotation stops and the TILT LED is

ashing.

Press the TILT button (6) once: The rotation of the laser starts - but the TILT

mode is disabled. Press the TILT button (6) twice: The rotation of the laser

starts, the self-levelling procedure is completed and the laser restarts working

with enabled TILT mode.

Press button (6) to disable the TILT mode after completion of the self-levelling

procedure.

6ROTATIONS LASER RED CLASS 2

MANUAL MODE (3)

Power on the laser with button (1). After completion of the self-levelling

procedure press button (3). The TILT LED (5) will power off and the MANUAL

LED (4) will be illuminated permanently. Now the laser can be used in slope

position, i. e. it can be used with a grade mount without giving TILT alarm.

In vertical position a required alignment can be made quick and safe by

means of the MAN function. When the alignment has been made quit the

MAN function.

APPLICATION

raptor-products.com 7

Receiver FR 45:

2. 4.

11.

10.

FEATURES

1. Vial

2. Display

3. Reference indicator

4. Receiving window

5. ON / OFF switch

6. Loudspeaker

7. Battery compartment (back side)

8. Sound on / off

9. Accuracy coarse / normal / ne

10. Light on / off

11. Magnets

12. 1/4“-thread for clamp (back side)

SUPPLIED WITH

Receiver FR 45, battery, clamp, user manual

Technical Data

Indication Front display

Accuracy coarse ± 10 mm

Accuracy normal ± 4 mm

Accuracy ne ± 2 mm

Tones 3

Operating time 400h

Power supply 1 x 9V

SYMBOLS

1. Power ON / OFF

2. Battery status indicator

3. Detection indicator

4. Sound ON / OFF

5. Detected position indicator

8ROTATIONS LASER RED CLASS 2

ACCURACY COARSE / NORMAL / FINE

The FR 45 is equipped with three precision modes. They can be chosen by

pressing button (9):

Accuracy coarse: ± 10 mm

Symbol on display: without symbol

Accuracy normal: ± 4 mm

Symbol on display:

Accuracy ne: ± 2 mm

Symbol on display:

INSTALLATION OF THE BATTERIES

• Open the battery compartment cover (7).

• Insert 1 x 9 V AA battery according to the installation symbol

(ensure correct polarity!). Close the cover.

• In order to save battery power the receiver will automatically turn off if it

has not received laser scanning singal for 5 minutes.

USE OF RECEIVER

Press the button (5) to switch the unit on.

Move the receiver up and down carefully to detect the laser beam.

A: Move the receiver down

Acoustic signal : ultra-short requent beep

B: Move the receiver up

Acoustic signal: short requent beep

C: On level

Acoustic signal: continuous beep

A+B: The closer the distance to „on level“ (C) is, the shorter the arrows

become.

raptor-products.com 9

CLAMP FOR LEVELLING STAFF

If required the FR 45 can be attached to laser poles or any other equipment

by means of the clamp supplied with.

Safety notes:

SPECIFIC REASONS FOR ERRONEOUS MEASURING RESULTS

Measurements through glass or plastic windows; dirty laser emitting

windows; after the instrument has been dropped or hit. Please check the

accuracy. Large uctuation of temperature: If the instrument will be used in

cold areas after it has been stored in warm areas (or the other way round)

please wait some minutes before carrying out measurements.

CARE AND CLEANING

Handle measuring instruments with care. Clean with soft cloth only, after

any use. If necessary damp the cloth with some water. If the instrument is

wet clean and dry it carefully. Pack it up only if it is perfectly dry. Transport in

original container / case only.

ELECTROMAGNETIC ACCEPTABILITY (EMC)

It cannot be completely excluded that this instrument will disturb other

instruments (e.g. navigation systems); will be disturbed by other instruments

(e.g. intensive electromagnetic radiation nearby industrial facilities or radio

transmitters).

CE-CONFORMITY

The instrument has the CE mark according to EN 61010-1:2001 + corrig. 1+2.

WARRANTY

This product is warranted by the manufacturer to the original purchaser to be

free from defects in material and workmanship under normal use for a period

of two (2) years from the date of purchase. During the warranty period, and

upon proof of purchase, the product will be repaired or replaced (with the

same or similar model at manufacturers option), without charge for either

parts or labour. In case of a defect please contact the dealer where you

originally purchased this product. The warranty will not apply to this product

if it has been misused, abused or altered. Without limiting the foregoing,

leakage of the battery, bending or dropping the unit are presumed to be

defects resulting from misuse or abuse.

10 ROTATIONS LASER RED CLASS 2

EXCEPTIONS FROM RESPONSIBILITY

1. The user of this product is expected to follow the instructions given in

the user manual. Although all instruments left our warehouse in perfect

condition and adjustment the user is expected to carry out periodic

checks of the product’s accuracy and general performance.

2. The manufacturer, or its representatives, assumes no responsibility of

results of a faulty or intentional usage or misuse including any direct,

indirect, consequential damage, and loss of prots.

3. The manufacturer, or its representatives, assumes no responsibility for

consequential damage, and loss of prots by any disaster (earthquake,

storm, ood etc.), re, accident, or an act of a third party and/or a usage

in other than usual conditions.

4. The manufacturer, or its representatives, assumes no responsibility for any

damage, and loss of prots due to a change of data, loss of data and

interruption of business etc., caused by using the product or an unusable

product.

5. The manufacturer, or its representatives, assumes no responsibility for any

damage, and loss of prots caused by usage other than explained in the

user manual.

6. The manufacturer, or its representatives, assumes no responsibility for

damage caused by wrong movement or action due to connecting with

other products.

INTENDED USE OF INSTRUMENT

The instrument emits a visible laser beam in order to carry out the following

measuring tasks (depending on the instrument): Setting up heights, horizontal

and vertical planes, right angles.

SAFETY INSTRUCTIONS

• Follow up the instructions given in the user manual.

• Do not stare into the beam. The laser beam can lead to eye injury. Looking

directly into the beam (even from greater distance) can cause damage to

your eyes.

• Do not aim the laser beam at persons or animals.

• The laser plane should be set up above the eye level of persons.

• Use the instrument for measuring jobs only.

• Do not open the instrument housing. Repairs should be carried out by

authorized workshops only. Please contact your local dealer.

Table des matières

Langues :

Autres manuels Raptor Niveau laser

Raptor

Raptor 9764492 Manuel utilisateur

Manuels Niveau laser populaires d'autres marques

Nedo

Nedo ET-5 Manuel utilisateur

geo-FENNEL

geo-FENNEL Maxi-Liner FL 65 HP Manuel utilisateur

LaserLiner

LaserLiner X2-Laser Manuel utilisateur

Spectra

Spectra LL300N Manuel utilisateur

geo-FENNEL

geo-FENNEL Selection PRO FLG 40-PowerCross GREEN SP Manuel utilisateur

Nedo

Nedo Crossliner 4 Manuel utilisateur

Lasertec

Lasertec FX360G Manuel utilisateur

Flex

Flex ALC 8 Manuel utilisateur

Black & Decker

Black & Decker LZR5 Manuel utilisateur

Johnson

Johnson 40-6692 Manuel utilisateur

Cocraft

Cocraft HL 20-SG Manuel utilisateur

Zircon

Zircon iLine Manuel utilisateur

HWH

HWH 310 SERIES Manuel utilisateur

Leica

Leica iCON robot 60 Manuel utilisateur

LaserLiner

LaserLiner SuperCross-Laser SCL 2 Manuel utilisateur

LaserLiner

LaserLiner ActiveFinder XP Manuel utilisateur

DeWalt

DeWalt DW082 Manuel utilisateur

imex

imex EL20 Manuel utilisateur