RapidAIM PTY RapidAIM Manuel utilisateur
www.rapidaim.io
RapidAIM PTY LTD
Brisbane,
Australia
Instruction
Manual_
V1.0 2020
2 Instruction Manual
2 Instruction Manual
This handy guide will show
you how to set up your
new RapidAIM automated
trapping grid and get
started with digital fruit y
surveillance!
Please keep this document in a safe place. You
can also nd a digital version on our website -
www.rapidaim.io
3
Table of contents
Table of contents 3
Getting started 4
Download app 4
Unboxing 5
Trap preparation 6
Step 1 : Attach the antenna 7
Step 2 : Attach the rope 8
Step 3 : Attach lure stand 9
Step 4 : Activate the trap 10
Step 5 : Close the trap enclosure 12
Deploying traps in the eld 14
Tips for hanging traps 15
Maintenence 16
Deactivate traps with “maintenance mode” 17
Changing lures 17
Charging batteries 17
Removing batteries from a trap 18
FAQs 19
Technical support 20
4 Instruction Manual
Getting started
Download app
Register each trap to your account
If you haven’t already done so, download the
RapidAIM app from the App Store / Play Store.
Log in with your account or register for a new
account (this can be done from the login screen).
Each trap has a unique barcode,
this is how the data from each trap
is linked to your account. Open the
RapidAIM App and select the ‘ + ’
button and then “new trap”.
This will open a barcode scanner.
Scan the code on each trap that
you wish to link with your account
before you activate and hang the
traps in the eld. Note: this step
only links these traps to your
account - you will not see them on
the map in your app (only in the
dropdown list) until they are turned
on at the deployment site (page 9).
Important: Complete the following step BEFORE traps are activated in the eld
5
Useful items for deployment
»Nitrile/latex gloves for handling lure/insecticide (The NuFarm Amulet lure products we supply
contain a low concentration of Fipronil which is a slow acting insecticide. At this concentration
(3.4g/kg) the product is considered non-hazardous. The lures can be safely handled; however gloves
are recommended. Refer to the MSDS in the lure package.)
»Secateurs - for pruning around traps
»Flagging tape – we recommend marking the head of the row and the tree trunk that our traps are in.
Unboxing
1. RapidAIM Traps
2. Hanging Ropes
3. Antennas
(standard and high coverage)
4. Lures
5. Rechargeable Batteries (inside
traps) Battery chargers are
supplied for contract terms of 12
Months +
6. Sticky cards (optional - organic
customers)
Unpack each RapidAIM trap from
the box. Locate the pack with
antennas and the pack with the
hanging ropes. You will need these
items for steps 1 & 2.
Locate the pack with the lures.
You will need to bring these to the
deployment site. We recommend
bringing a container or box for
lures and other useful items for
deployment.
In your box you will nd the following items:
6 Instruction Manual
Trap
preparation_
6 Instruction Manual
7
Step 1 : Attach the antenna
TRAP PREPARATION
There are two types of antennas:
»the standard antenna (left)
which will be used for the vast
majority of traps
»the high coverage antenna
(right) which has heightened
communication capability.
These are only required if there is
a location that is known to have
poor mobile coverage. Check
your mobile phone signal when
deploying traps – if you do not
get a 3G/4G signal on your phone,
we recommend you use the high
coverage antenna.
Screw the antenna onto the socket
on top of the trap. It is important
that this is securely fastened. Check
that the connection is tight before
hanging the trap, especially if traps
are being pre-prepared before
driving to the site.
Note: There will be a gap of
approx 8mm between the base
of the antenna and the top of the
trap. This is normal.
8 Instruction Manual
TRAP PREPARATION
Step 2 : Attach the rope
There are hanging points with two
holes on each end of the trap for
attaching the rope. (Having two
holes means the trap can still be
hung in the event of damage to a
hanging point.)
Pass the metal aglet through a
hanging point on each side of the
trap.
It is important to ensure that the
trap hangs level when the rope is
attached. (The hook will be directly
above the antenna when it is level.)
9
TRAP PREPARATION
Step 3 : Attach lure stand
Complete the remaining steps on site where you will deploy the traps
Traps are baited with a lure, which is placed on a
stand inside the trap.
To place the lure:
»Unclip the yellow side tabs and remove the top
funnel section of the trap
»Place the lure on the stand inside the trap as
shown in the illustrations
»Both NuFarm Amulet lures and Organic
Cuelure-only cotton wick lures t the RapidAIM
lure stand. See the lure pack for MSDS. Amulett Lure (left), Cuelure-only Organic Lure (right)
For wick-type lures place the lure holder on the stand adjacent to the longest side of the trap. When
the lure stand is correctly placed there will be a small audible ‘click’.
For Amulett lures, place parallel to the longest side of the trap. When the lure stand is correctly
placed there will be a small audible ‘click’.
10 Instruction Manual
TRAP PREPARATION
Your traps will appear in the app within 30 minutes
of activation. You should receive a notication on
your device when traps come online.
Step 4 : Activate the trap
Each trap comes with a lithium-ion battery
pack. To activate the trap, plug the battery in by
following the steps below:
Remove the cardboard strip
to the left of the battery pack
(this cardboard was tted
to reduce vibration during
transport).
B
Unclip the battery pack cover
by gently squeezing on the
side tabs.
A
Plug the battery plug into
the socket.
C
Important: DO NOT turn a trap on before it‘s on site.
This step must be completed at the site/tree you wish to hang the trap
Table des matières
Manuels Matériel agricole populaires d'autres marques
GSi
GSi PNEG-2314 Manuel utilisateur
Checchi & Magli
Checchi & Magli TEXDRIVE Manuel utilisateur
Amazone
Amazone Cenius 4003-2TX Manuel utilisateur
MASSEY FERGUSON
MASSEY FERGUSON MF 9313S Manuel utilisateur
Cima
Cima BLITZ Instructions d'utilisation et d'entretien
Amazone
Amazone CombiDisc 3000 Instructions d'installation
