RP-50FC High-Speed Oil Filter Crusher 4P/N 5900392 — March 2017 — Rev. B
If any of the items listed on the bill of lading are missing or are damaged, do not accept the
shipment until the carrier makes a notation on the bill of lading that lists the missing and/or damaged
goods.
If you discover missing or damaged goods
after
you receive the shipment and have signed the bill of
lading, notify the carrier at once and request the carrier to make an inspection. If the carrier will not
make an inspection, prepare a signed statement to the effect that you have notified the carrier (on a
specific date) and that the carrier has failed to comply with your request.
It is difficult to collect for loss or damage after you have given the carrier a signed bill of lading. If this
happens to you, file a claim with the carrier promptly. Support your claim with copies of the bill of
lading, freight bill, invoice, and photographs, if available. Our willingness to assist in helping you
process your claim does not make us responsible for collection of claims or replacement of lost or
damaged materials.
Safety Considerations
Read this manual carefully before using your new product.
Do not set up or operate
the product until you are familiar with all operating instructions and warnings. Do not allow anyone else
to operate the product until they are also familiar with all operating instructions and warnings.
Safety Information
Please note the following:
•The product is a high-speed oil filter crusher.
Use it only for its intended purpose.
•The product should only be operated by authorized personnel. Keep children and untrained
personnel away from the product.
•Do not crush aerosol cans, cylinders of compressed gas, fuel filters, or containers of flammable
liquids or solvents.
•Do not open the door while the unit is operating; always wait for the end of the automatic cycle.
•When using the product, wear appropriate work clothes and ANSI-approved safety goggles. Do
not wear loose clothing or jewelry. Keep hair and clothing away from moving parts.
•When the product is in use, keep all body parts away from it.
•Do not use the product while tired or under the influence of drugs, alcohol, or medication.
•Do not use the product in the presence of cigarette smoke, dust, or flammable liquids or gases.
•Only use the product indoors in a well-ventilated area.
•Do not make any modifications to the product.
•Secure the unit to a dry, clean, flat concrete surface; do not install it on asphalt or wood.
•Make sure all operators read and understand the Installation and Operation Manual. Keep the
manual near the device at all times.
•Avoid using an extension cord; they can overheat. If you must use an extension cord, make sure it
is No. 14 AWG
minimum
.
•Make a visual inspection of the product before using it. Do not use the product if you find any
missing or damaged parts. Instead, contact an authorized repair facility, your distributor, or the
Ranger Products Technical Support Hotline at +1.805.933.9970.
•BendPak Ranger recommends making a
thorough
inspection of the product at least once a year.
Replace any damaged or severely worn parts, decals, or warning labels.
