Rand McNally DashCam 500 Manuel utilisateur
DashCam 500
User Manual
2
DashCam 500 User Manual
Contents
Your New DashCam 500 ..............................................................................3
About the DashCam 500 ..................................................................3
Key Features .....................................................................................3
What’s in the Box..............................................................................4
Getting Started .................................................................................5
Install the Memory Card ...................................................................5
Attach the Suction Cup and Mount to Window................................5
Connect a USB Cable for Power........................................................6
Turn On/Off ......................................................................................7
Install the Companion App ...............................................................7
Pair the Camera with your Phone......................................................8
Format the Memory Card .................................................................9
Using the DashCam....................................................................................10
Home Screen.................................................................................. 10
Dynamic Buttons ............................................................................11
Power Button .................................................................................13
Wi-Fi®.............................................................................................13
Live Feed ........................................................................................14
Gallery............................................................................................15
Photo .............................................................................................16
Settings ..........................................................................................16
Using the App ............................................................................................19
Live Feed........................................................................................19
Videos............................................................................................21
Photos............................................................................................22
MapShots™.....................................................................................22
Download and Share Videos and Photos.........................................23
Settings...................................................................... ....................25
Flashback Videos........................................................................................26
Use on DashCam............................................................................ 26
Use in App..................................................................................... 27
Warnings, End-User License Agreement, and Warranty ....................... 28
3
DashCam 500 User Manual
About the DashCam 500
Never miss a critical incident or a memory-video with this
high-quality, Wi-Fi®and GPS-enabled dash camera with
active VideoKeeper™. A free companion app lets you
sync your device and download video and photos to your
smartphone through a built-in Wi-Fi®connection. And
with the press of a button, share your treasured picks via
social media or email.
Key Features
• VideoKeeper ensures that a video is preserved in case of an
accident or incident that is triggered by a G-Sensor.
• With the flashback feature, one to three minutes of video
preceding the press of a button will ensure that a video of
something that happened in the past is saved, almost like
flashing back to the past.
• View a live video feed on the DashCam or on a smartphone via
the companion app.
• Pause, record, and delete videos on the DashCam or remotely
through the app.
• Use the app’s Gallery screen to sort videos and photos, emergency
incidents, and memories.
• Capture still photographs while recording video.
• With MapShots™, view your drive on a map at the same time
you replay the video.
• Share images and photos quickly on social media or in an email
through your smartphone.
Your New DashCam 500
4
DashCam 500 User Manual
What’s in the Box
• 1080p HD DashCam with large
3” screen for high-quality video
• Easy to use, clip-in suction cup mount
with quick release and GPS
• 16GB memory card
• Micro USB cable
5
DashCam 500 User Manual
Getting Started
To begin using your DashCam, you need to:
Install the Memory Card
The DashCam records all videos and images to a
micro SD card that inserts into the side of the unit.
You must remove the plastic cover to access the
card slot.
1. On the right side of the DashCam, pull back the cover that
protects the card slot using a paper clip, fingernail, or another
thin tool.
2. Slide the card into the slot until it clicks into place.
3. Replace the cover.
4. To remove the SD card, open the cover and push down in the
center of the card’s edge. It will click and eject.
Notes: You can only use a micro SD card. You must format the SD card before
using it. (you can do this in the camera). Refer to the Format the Memory
Card section.
Attach the Suction Cup and Mount to Window
The DashCam connects to a separate suction cup mount. There are two
tabs on the mount that connect into the top of the DashCam. These
tabs on the side of the mount can be squeezed to insert or release the
mount from the camera. There is only one way the suction cup
mount can attach to the camera. Please pay attention to the
small notch near the connector pins of the suction cup mount
that aligns to a small tab on the top of the camera.
1. Press the suction cup against the windshield.
2. Rotate the knob on the mount to lock it in place.
3. On the bottom of the GPS mount, press the two tabs inward
and hold them.
4. Slide the DashCam into the mount and release the tabs.
5. Press the tabs again to release the DashCam from the mount.
1
2
3
4
➘
➘
➘
6
DashCam 500 User Manual
Getting Started
Tip 1:
You may want to get familiar with the DashCam or change settings
before attaching it to the window. In this case, you can attach the
USB power cord to the camera (see below) before mounting it to
the window.
Tip 2:
To navigate through the menu screens of the DashCam, you need to
use the buttons located below the camera’s screen. These buttons are
dynamic and change depending on the function you have selected.
The icons for the buttons are visible at the bottom of the screen.
Remember, the camera does not have a touch screen so in order to
move around the screen you need to use the buttons at the bottom
of the camera.
Connect a USB Cable for Power
The DashCam is powered by an internal battery, and can be recharged
using a micro USB cable.
Connect the USB cable to the port in the top left corner of the
DashCam, or to the connector on the end of the lock knob,
as shown above.
Connect the other end to a car changer in your vehicle.
Note: This battery is intended only to finish a recording when or if the camera
has been disconnected from power in the case of an accident or for parking
mode. It is not intended to provide hours of use as a stand-alone camera.
➘
➘
7
DashCam 500 User Manual
Getting Started
Turn On/Off
The DashCam powers on automatically when you connect the micro
USB cable to a power source.
You can also press and hold (5 seconds) the Power button (located on
the top right of the DashCam) to turn the DashCam off. A quick press
of the Power button will turn the camera on.
Install the Companion App
The DashCam 500 can be controlled by a companion app on either
an iOS or Android device. You can also use the app to view the
live video feed.
To download the app
On an iOS device:
1. Open the App Store on your smartphone.
2. Search for Rand McNally DashCam.
Select and install the app
On an Android Device:
1. Open the Google Play store on your device.
2. Search for Rand McNally DashCam.
Select and install the app
➘
8
DashCam 500 User Manual
Getting Started
Pair the Camera with your Phone
The DashCam 500 pairs with your phone using a Wi-Fi connection.
The camera acts as a wireless hotspot. You must select this hotspot
from your phone’s Wi-Fi settings page.
App Settings:
2
1. Press the Wi-Fi dynamic button on the DashCam to enable
or disable Wi-Fi.
2. The Wi-Fi screen opens, and you can view the network name
and pairing code (password) to use to connect your phone.
3. Go to your phones settings to select the Rand McNally
Wi-Fi network.
4. Press the Back dynamic button to return to the DashCam
500 home screen.
1
9
DashCam 500 User Manual
Getting StartedGetting Started
Format the Memory Card
The SD card must be formatted before you can record video. You can
use the dynamic buttons on the DashCam or use the Rand McNally
DashCam app on your smartphone to format the SD card.
From the DashCam:
1. Navigate to the Settings screen.
2. Use the up and down arrows to highlight Format TF Card.
3. Press Select.
4. Select OK.
From the app:
1. Connect your phone to the DashCam Wi-Fi network.
2. Tap Settings in the app.
3. Tap Format SD Card.
4. Tap OK.
10
DashCam 500 User Manual
Using the DashCam
The DashCam interface features a 3" screen with four dynamic
touch-sensitive buttons along the bottom. These dynamic buttons
allow you to navigate and control all functionality on the DashCam.
All functions can be performed either on the DashCam using the
dynamic buttons, or from within the companion app.
Home Screen
When you power on the DashCam, it immediately begins recording
and displays the live view screen.
To access the Home screen, press Back. If you are recording video,
the Home screen displays REC and a red dot in the top right corner.
The Home screen is shown below:
Autres manuels pour DashCam 500
1
Table des matières
Autres manuels Rand McNally Caméra embarquée
