TrackerBoard User Manual
COPYRIGHT ©
SHENZHEN RAKWIRELESS TECHNOLOGY CO., LTD
www.rakwireless.com ETDX1711291302
apps
-mcu.c application code
boards
-RAK811BreakBoard
-cmsis stm32lxx platform system initial
-STM32L1xx_HAL_Driver stm32lxx platform peripheral driver
-board.c... peripheral initial and stm32 related pins operate
-mcu
-stm32 stm32lxx platform system interrupted
components
-Retarget_printf printf function configuration
mac
-LoRaMac.c LoRaMacCrypto.c lora mac driver
-region The region defined by LoRaWAN1.0.2
Peripherals
-lis3dh.c Acceleration chip LIS3DH driver files
radio
-sx1276.c support the semtech sx1276 driver
system
-crypto lora transmit security use AES and cmac check
-adc.c delay.c... delay ,timer, support and uart,adc,i2c,gpio Interface rewrite
2.2 Configuration Parameters
In the classA project, if you want to modify the way the device joins the network and
the parameters of joining the network, these parameters include Dev_EUI, APP_EUI,
APP_KEY, DEV_ADDR, NWKS_KEY, APPS_KEY. You can modify it in the
Commissioning.h file.
If you want to modify the way to join the network, please modify this parameter:
