RainPoint ITV205 Manuel utilisateur
PLEASE ACTIVATE THE VALVE BEFORE USE IF YOU ARE USING IT
FOR THE FIRST TIME OR AFTER A PERIOD OF IDLENESS TO
ENSURE YOU CAN USE IT PROPERLY：
1. TURN THE TIMER DIAL TO ON AND HOLD THE OK BUTTON FOR
3-5 SEC TO ENTER MANUAL WATERING MODE.
2. RE-PRESS THE ZONE BUTTON 2 TIMES TO SELECT 2 ZONES
3. AFTER HEARING 2 "CLICKING" SOUND, TURN THE DIAL TO OFF
TO CLOSE THE MANUAL FUNCTION.
4. REPEAT STEPS1-3 FOR 3-5 TIMES.
(EXPLANATION: IN MOST CASES THE VALVE IS ACTIVATED, BUT
DUE TO EXTERNAL FORCES OR THE ENVIRONMENT DURING
STORAGE AND TRANSPORTATION BY A VARIETY OF FACTORS,
THE VALVE MAY APPEAR TO CLOSE ON ITS OWN, THEN IT
NEEDS TO BE ACTIVATED MANUALLY)
FOR ANY PROBLEMS DURING USE, PLEASE GET SUPPORT AS
FOLLOWS：
WEB: www.rainpointus.com
EMAIL:[email protected]
FREE HOTLINE (US): 833 3815659
FILTER
DIAL
DELAY/+
BUTTON
ZONE 2
ZONE
ZONE 1
- BUTTON
OK/MANUAL
BUTTON
HOSE TAP
CONNECTION
BIG LCD
SCREEN
DIAL
OK / MANUAL Button
DELAY / + Button
- Button
ZONE Button
NH (US) for 3/4" taps
BSP (EU) for 3/4" or 1" taps
on the
Insert
1) First select ZONE 1, complete the settings for ZONE 1 according to steps
1-4 below, then turn the dial to "ON" to save the changes.
2) Then press ZONE to select ZONE 2, repeat the following steps 2-4 again,
and finally turn the dial to "ON" to save the changes.
Examples of watering frequencies are every 1 day, every 2 days and
every 3 days：
EVERY 1 DAY
WEEK
ONE
Mon Tue
EVERY 2 DAY
WEEK
ONE
EVERY 3 DAY
WEEK
ONE
Mon Tue
Mon Tue
Wed Thu
Wed Thu
Wed Thu
Fri Sat Sun
Fri Sat Sun
Fri Sat Sun
1) With the dial in the "ON" position, press the "DELAY/+" button for 3-5s to
start the delay watering function.
2) In Delay Mode, you can find the selection of 24H flashing on the screen.
Press "+" and "-" to select delay time from 24H, 48H and 72H.
3) Press "OK" button to confirm, then the screen will flash between clock and
hours remaining before programmed cycle resumes.
4)To remove rain delay,hold the"DELAY/+"button for 3-5s again to resume
your programmed watering schedule.
When the selection is flashing, if there is no action or operation for 5 sec, the
Delay Mode will be automatically cancelled and back to home page.
Note:
1) When the selection is flashing, if there is no action or operation for 5 sec, the
Manual Mode will be automatically cancelled and back to home page.
2) There may be a slight delay between the time the manual button is pressed
and when watering begins.
4) Press "OK"button to confirm and start the manual watering.the screen will
flash between clock and hours remaining before programmed cycle resumes.
5) To stop manual watering, turn the dial to OFFand then back to NO, or hold
the "OK/MANUAL" button for 3-5s again to resume your programmed
watering schedule.
3) Use the "+" and "-" button to select watering time, from 1 min to 8 hours.
(The default watering plan is 10 minutes.)
Autres manuels pour ITV205
1
Autres manuels RainPoint Minuteur
RainPoint
RainPoint ITV105 Manuel utilisateur
RainPoint
RainPoint ITV201P Manuel utilisateur
RainPoint
RainPoint TTV102B Manuel utilisateur
RainPoint
RainPoint ITV201P Manuel utilisateur
RainPoint
RainPoint ITV101P Manuel utilisateur
RainPoint
RainPoint ITV517 Manuel utilisateur
RainPoint
RainPoint TTV102B Manuel utilisateur
RainPoint
RainPoint HTV113FRF Manuel utilisateur
RainPoint
RainPoint TTV103WRF Manuel utilisateur
RainPoint
RainPoint ITV101P Manuel utilisateur
