RainPoint ITV201P Manuel utilisateur

USER MANUAL

2-Zone Hose Faucet Timer

Model No.ITV201P

WEB: www.rainpointus.com

Email:service@rainpointus.com

Free Hotline (US): 833 3815659

PLEASE ACTIVATE THE VALVE BEFORE USE IF YOU ARE USING IT

FOR THE FIRST TIME OR AFTER A PERIOD OF IDLENESS TO

ENSURE YOU CAN USE IT PROPERLY：

1. TURN THE TIMER DIAL TO ON AND HOLD THE OK BUTTON FOR

3-5 SEC TO ENTER MANUAL WATERING MODE.

2. RE-PRESS THE ZONE BUTTON 2 TIMES TO SELECT 2 ZONES

3. AFTER HEARING 2 "CLICKING" SOUND, TURN THE DIAL TO OFF

TO CLOSE THE MANUAL FUNCTION.

4. REPEAT STEPS1-3 FOR 3-5 TIMES.

(EXPLANATION: IN MOST CASES THE VALVE IS ACTIVATED, BUT

DUE TO EXTERNAL FORCES OR THE ENVIRONMENT DURING

STORAGE AND TRANSPORTATION BY A VARIETY OF FACTORS,

THE VALVE MAY APPEAR TO CLOSE ON ITS OWN, THEN IT

NEEDS TO BE ACTIVATED MANUALLY)

FOR ANY PROBLEMS DURING USE, PLEASE GET SUPPORT AS

FOLLOWS：

WEB: www.rainpointus.com

EMAIL:service@rainpointus.com

FREE HOTLINE (US): 833 3815659

Select Zone Left or Zone Right to be programmed

FILTER

DIAL

DELAY/+

BUTTON

ZONE

BUTTON

- BUTTON

P BUTTON

OK/MANUAL

BUTTON

HOSE TAP

CONNECTION

BIG LCD

SCREEN

3 C - 50 C (37 F - 122 F)

Water Duration 1min - 3h59min

Water Frequency every 2 days to every 6 days or any

day from Monday to Sunday

Waterproof and Dustproof IP54

Max Flow Rate 35L/Min

Thread Type For tap 3/4 or 1 with BSP or NH thread

Battery Life Approx 1 year

Working Temperature

Operating Water Pressure 0.5 - 8bar (7-116 psi)

1) First select ZONE L, complete the settings for ZONE L according to steps

1-4 below, then turn the dial to "ON" to save the changes.

2) Then press ZONE to select ZONE R, repeat the following steps 2-4 again,

and finally turn the dial to "ON" to save the changes.

After completing the settings of each dial item, please turn the dial to save

and go to the nextdial item. If you continue to press the OK button at this

time, you will re-enter the setting of the dial item.

1. Turn dial to START TIME.

2. Using the "+"and "-"button to set time to start watering.

3. Using "OK"button to switch time between hours and minutes.

4. Press "P"to switch plan between P1, P2 and P3.

5. Press "ZONE"button to switch outlet betweenZONE Left andZONE Right .

6. Turn dial to save changes.

1. Turn dial to HOW LONG.

2. Using the "+"and "-"button to set the time of watering duration from 1 minute to

3 hours 59 minutes.

3. Using "OK"button to switch time between hours and minutes.

4. Press "P"to switch plan between P1, P2 and P3.

5. Press "ZONE"button to switch outlet betweenZONE Left andZONE Right .

6. Turn dial to save changes.

1.Turn the dial to HOW OFTEN.

2.There are 2 setting modes for watering frequency.

1）Weekday Mode : Monday toSunday.

(Watering plans will run every Sunday, Wednesday, Thursday and Friday)

a. Press "+" button to select the day of the week, press "OK" toconfirm.

b. means the "Day" has been selected. Pressing "OK" again can cancel the

selection.

c. Turn dial toconfirm the changes.

(Watering plans will run every day)

If you want to run the watering schedule every day, please select every day from

Monday toSunday.

After you have finally selected the days to be watered, please do not press the

OK button toconfirm, please turn the dial directly to confirm. Otherwise the

cursor will flashing on next day or enter the “Every 2/3/4/5/6 Days Mode”

2）Every 2/3/4/5/6 Days Mode: (Without Every 1 Day Mode)

If there are no problems, please turn dial toONto allow your timer to water according

tothe programmed time, zone, duration and frequency.

1) With the dial in the "ON" position, press the "DELAY/+" button for 3-5s to

start the delay watering function.

2) In Delay Mode, you can find the selection of 24H flashing on the screen.

Press "+" and "-" to select delay time from 24H, 48H and 72H.

3) Press "OK" button to confirm, then the screen will start countdown. The plan will

resume when the countdown ends.

4) To remove rain delay, you need to hold the “DELAY/+” button for 3-5s again to

resume your watering schedules.

When the selection is flashing, if there is no action or operation for 5 sec, the

Rain Delay Mode will automatically start based on the time you stay.

Autres manuels pour ITV201P

Autres manuels RainPoint Minuteur

RainPoint

RainPoint TTV102B Manuel utilisateur

RainPoint

RainPoint ITV205 Manuel utilisateur

RainPoint

RainPoint ITV101P Manuel utilisateur

RainPoint

RainPoint ITV105 Manuel utilisateur

RainPoint

RainPoint ITV201P Manuel utilisateur

RainPoint

RainPoint TTV103WRF Manuel utilisateur

RainPoint

RainPoint HTV213FRF Manuel utilisateur

RainPoint

RainPoint ITV101P Manuel utilisateur

RainPoint

RainPoint TTV203WRF Manuel utilisateur

RainPoint

RainPoint ITV105 Manuel utilisateur

RainPoint

RainPoint HTV113FRF Manuel utilisateur

RainPoint

RainPoint ITV517 Manuel utilisateur

RainPoint

RainPoint ITV205 Guide d'installation

RainPoint

RainPoint TTV102B Manuel utilisateur

Manuels Minuteur populaires d'autres marques

Intermatic

Intermatic P1131 Manuel utilisateur

Learning Resources

Learning Resources Time Tracker mini Manuel utilisateur

CEBEK

CEBEK I-215 Manuel utilisateur

Somogyi

Somogyi home TS MD 5 Manuel utilisateur

Profile

Profile 010200280 Manuel utilisateur

Gizmo

Gizmo T4 Manuel utilisateur

Tekmar

Tekmar Timer 031 Manuel utilisateur

Daikin

Daikin DST301B61 Manuel utilisateur

sisel

sisel ENDA ETM2432 Manuel utilisateur

B&Q

B&Q TE103 Manuel d'utilisation et d'entretien

Hozelock

Hozelock AC Plus 2700 Manuel utilisateur

GIC

GIC Eliro V7DDSS3Eliro V7DFTS3 Manuel utilisateur

Tork

Tork TU40 Manuel utilisateur

Emos

Emos EMT400F Manuel utilisateur

FarmTek

FarmTek Polaris Manuel utilisateur

Maximum

Maximum CRONUS Manuel utilisateur

Uberhaus

Uberhaus TD133B Manuel utilisateur

Clas Ohlson

Clas Ohlson 31-3766 Manuel utilisateur