Radio Shack Wireless Security Keychain Remote Manuel utilisateur

Please read this user’s guide before

installing, setting up and using your new product

www.radioshack.com

Thank you for purchasing your Wireless

Security Keychain Remote from

RadioShack. keychain remote

Two CR2016 lithium batteries (installed)

what’s included

1. Press and hold down arm for 3-4 seconds,

and then release it.

Note: If you need to register the keychain

remote a second time, remove the batteries,

and then hold down arm for 3-4 seconds to

pick up a random code.

2. Press menu start or on your security

system console. ENTER PIN (Personal

Identiﬁcation Number) appears on the

display.

3. Use the console keypad to enter your four-

digit PIN. * appears on the display as each

digit is pressed. After you enter your PIN, 1.

INSTALL appears.

4. Press ok and 1. INSTALL / ZONE appears.

5. Press any button on your keychain remote.

RMOT 1 SET appears on the console display

to conﬁrm registration.

6. Press clear to return to the setup screen.

Press clear again to conﬁrm your exit from

setup mode. Press 1 to return to the main

display, or press 2 to stay in setup mode.

See your Wireless Security Kit User Guide (49-

1000) for instructions on changing your PIN.

49-1002

Wireless Security

Keychain Remote

registering your keychain remote

Use your wireless keychain remote to arm and disarm your Wireless Security Kit

(49-1000). Your Wireless Security Kit includes one keychain remote, and you can purchase

up to 15 additional keychain remotes (16 total) to use with your system. Your keychain can

also control devices connected to remote modules (such as a lamp) that are controlled by

your Wireless Security System. Your keychain includes random digital security coding for

enhanced security.

Press to arm your security system (door/window sensors,

motion detectors).

Press to disarm your security system.

on and off (A and B) allow you to turn on and off up to two

devices that are connected to home automation modules,

such as a 61-3002 Lamp Module. Use this feature to turn lights

on and off while you are away from home.









arming the system

Press arm on your keychain remote.

All door/window sensors and motion

detectors that are part of your security

system are armed instantly.

disarming the system

When you return home, you have 30

seconds to enter and disarm the system

from the console (using your PIN) before

the alarm sounds. Thirty seconds is the

default entry time. Refer to your Wireless

Security Kit User Guide for details on how

to change the default delay and entry

times. Press disarm on the keychain remote

to instantly disarm the system.

This equipment has been tested and found to

comply with the limits for a Class B digital device,

pursuant to Part 15 of the FCC Rules. These limits

are designed to provide reasonable protection

against harmful interference in a residential

installation. This equipment generates, uses

and can radiate radio frequency energy and, if

not installed and used in accordance with the

instructions, may cause harmful interference to

radio communications.

However, there is no guarantee that interference

will not occur in a particular installation. If this

equipment does cause harmful interference

to radio or television reception, which can be

determined by turning the equipment off and

on, the user is encouraged to try to correct the

interference by one or more of the following

measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment

and receiver.

• Consult your local RadioShack store or an

experienced radio/TV technician for help.

• If you cannot eliminate the interference, the

FCC requires that you stop using your keychain

remote.

Changes or modiﬁcations not expressly approved

by RadioShack may cause interference and void

the user’s authority to operate the equipment.

This device complies with Part 15 of the FCC Rules.

Operation is subject to the condition that this

device does not cause harmful interference.

RadioShack.com are trademarks

used by RadioShack Corporation.

49-1002

07A04

Printed in China

arming/disarming your system

FCC information

Your keychain remote comes with two

CR2016 button-cell batteries installed. If

your keychain stops working properly,

replace the batteries.

1. Gently pry the

two halves of the

keychain remote

apart as shown.

2. Remove the old

batteries and

replace them with

two fresh CR2016 button-cell batteries.

Fresh batteries must be inserted within

30 seconds in order to retain the

security code.

3. Press the two halves of the remote

back together.

4. Press arm to arm your system. If the

system does not arm, you must

“registering your keychain remote” on

page 1.

replacing the batteries

• Dispose of old batteries promptly and properly.

• Do not burn or bury batteries.

• Use only fresh batteries of the required size and

recommended type.

• Do not mix old and new batteries, different types

of batteries, or rechargeable batteries of different

capacities.

Warning: Keep away from small children. If

swallowed, promptly see doctor.

Table des matières

Autres manuels Radio Shack Télécommande

Radio Shack

Radio Shack Remote Control Manuel utilisateur

Radio Shack

Radio Shack 63-1166 Manuel utilisateur

Radio Shack

Radio Shack 7-in-1 Remote Control with Lighted Keypad Manuel utilisateur

Radio Shack

Radio Shack 150-2114 Manuel utilisateur

Radio Shack

Radio Shack Light and Learn Remote Manuel utilisateur

Radio Shack

Radio Shack 15-2146 - Voice Prompt Universal Remote Manuel utilisateur

Radio Shack

Radio Shack Audio/ Video Remote Control Manuel utilisateur

Radio Shack

Radio Shack 2-in-1 Remote Control Manuel utilisateur

Radio Shack

Radio Shack Kameleon Manuel utilisateur

Radio Shack

Radio Shack Kameleon 4-in-1 Manuel utilisateur

Radio Shack

Radio Shack 15-309 Manuel utilisateur

Radio Shack

Radio Shack Keychain-Remote Control System Manuel utilisateur

Radio Shack

Radio Shack 8-IN-ONE REMOTE Manuel utilisateur

Radio Shack

Radio Shack Kameleon Manuel utilisateur

Radio Shack

Radio Shack Univer 15-2138 Manuel utilisateur

Radio Shack

Radio Shack 6-in-1 Remote Control Manuel utilisateur

Radio Shack

Radio Shack 15-1995 Manuel utilisateur

Radio Shack

Radio Shack Kameleon 4-in-1 Manuel utilisateur

Radio Shack

Radio Shack 15-303 Manuel utilisateur

Radio Shack

Radio Shack 15-2147 - Universal Remote Manuel utilisateur

Radio Shack

Radio Shack 7-in-One IR Manuel utilisateur

Radio Shack

Radio Shack 15-1915B Manuel utilisateur

Radio Shack

Radio Shack Keychain Manuel utilisateur

Radio Shack

Radio Shack 15-1990 Manuel utilisateur

Manuels Télécommande populaires d'autres marques

Panasonic

Panasonic EUR7622KB0 Manuel utilisateur

Bang & Olufsen

Bang & Olufsen Beo4 Manuel utilisateur

Sunwave Tech.

Sunwave Tech. RemoteComm SRC-7000 Manuel utilisateur

Multiplex

Multiplex PROFI TX 9 Manuel utilisateur

One Remote

One Remote RMB4 Manuel utilisateur

FUTABA

FUTABA 9ZAP - PART2 Manuel utilisateur

HR Matic

HR Matic HR MULTI 3 Manuel utilisateur

Yamaha

Yamaha ACC-GNRST-30-20 Manuel utilisateur

EisSound

EisSound KBSOUND Manuel utilisateur

Marantz

Marantz RC101 Manuel utilisateur

Conrad

Conrad FS20 TC6 Manuel utilisateur

Anritsu

Anritsu MP1777A Manuel utilisateur

Niles

Niles WVC100 Guide de dépannage

RCA

RCA RCU1300 Manuel utilisateur

Bang & Olufsen

Bang & Olufsen BEO6 Manuel utilisateur

GE 94901 Manuel utilisateur

Onbon

Onbon YQ1-75 Manuel utilisateur

FUTABA

FUTABA R7108SB Instructions d'installation