QSC Q-SYS CORE NANO Instructions d'utilisation

TD-001615-00-A

*TD-001543-01*

™

Hardware User Manual

CORE NANO - NETWORK I/O PROCESSOR

CORE 8 FLEX - USB/FLEX CHANNELS

TD-001615-00-A

EXPLANATION OF TERMS AND SYMBOLS

The term “WARNING!” indicates instructions regarding personal safety. If the instructions are not followed the result may be bodily injury or death.

The term “CAUTION!” indicates instructions regarding possible damage to physical equipment. If these instructions are not followed, it may result in

damage to the equipment that may not be covered under the warranty.

The term “IMPORTANT!” indicates instructions or information that are vital to the successful completion of theprocedure.

The term "NOTE" is used to indicate additional useful information.

The intent of the lightning ﬂash with arrowhead symbol within an equilateral triangle is to alert the user to the presence of un-insulated

"dangerous" voltage within the product's enclosure that may be of sufﬁcient magnitude to constitute a risk of electric shock to humans.

The intent of the exclamation point within an equilateral triangle is to alert the user to the presence of important safety, and operating and

maintenance instructions in this manual.

IMPORTANT SAFETY INSTRUCTIONS

WARNING! TO PREVENT FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS EQUIPMENT TO RAIN OR MOISTURE.

Elevated Operating Ambient - If installed in a closed or multi-unit rack assembly, the ambient operating temperature of the

rack environment may be greater than room ambient. Consideration should be given to ensure that the maximum operating temperature

range 0°C to 50°C (32°F to 122°F) is not exceeded. Reduced Air Flow – Installation of the equipment in a rack should be such

that the amount of airﬂow required for safe operation of the equipment is not compromised.

1. Read these instructions.

2. Keep these instructions.

3. Heed all warnings.

4. Follow all instructions.

5. Do not use this apparatus near water.

6. Do not submerge the apparatus in water or liquids.

7. Do not use any aerosol spray, cleaner, disinfectant or fumigant on, near or into the apparatus.

8. Clean only with a dry cloth.

9. Do not block any ventilation opening. Installation next to another unit within a rack should allow sufﬁcient air ﬂow required for safe operation.

10. Keep the side ventilation openings free of dust or other matter.

11. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including ampliﬁers) that produce heat.

12. To reduce the risk of electrical shock, the power cord shall be connected to a mains socket outlet with a protecting earthing connection.

13. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A

grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided

plug does not ﬁt into your outlet, consult an electrician for replacement of the obsolete outlet.

14. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the

apparatus.

15. Do not unplug the unit by pulling on the cord, use the plug.

16. Only use attachments/accessories speciﬁed by the manufacturer.

17. Unplug this apparatus during lightning storms or when unused for long periods of time.

18. Refer all servicing to qualiﬁed service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-

supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or

moisture, does not operate normally, or has been dropped.

19. The appliance coupler or the AC Mains plug is the AC mains disconnect device and shall remain readily accessible after installation.

20. Adhere to all applicable local codes.

21. Consult a licensed, professional engineer when in doubt or questions arise regarding a physical equipment installation.

TD-001615-00-A

Maintenance and Repairs

WARNING!: Advanced technology, e.g., the use of modern materials and powerful electronics, requires specially adapted

maintenance and repair methods. To avoid a danger of subsequent damage to the apparatus, injuries to persons and/or the creation of

additional safety hazards, all maintenance or repair work on the apparatus should be performed only by a QSC authorized service station

or an authorized QSC International Distributor. QSC is not responsible for any injury, harm or related damages arising from any failure of

the customer, owner or user of the apparatus to facilitate those repairs.

Limited Battery Warning

WARNING!: THIS EQUIPMENT CONTAINS A NON-RECHARGEABLE LITHIUM BATTERY. LITHIUM IS A CHEMICAL KNOWN TO THE STATE

OF CALIFORNIA TO CAUSE CANCER OR BIRTH DEFECTS. THE NON-RECHARGEABLE LITHIUM BATTERY CONTAINED IN THIS EQUIPMENT

MAY EXPLODE IF IT IS EXPOSED TO FIRE OR EXTREME HEAT. DO NOT SHORT CIRCUIT THE BATTERY. DO NOT ATTEMPT TO RECHARGE

THE NON-RECHARGEABLE LITHIUM BATTERY. THERE IS A RISK OF EXPLOSION IF THE BATTERY IS REPLACED BY AN INCORRECT TYPE.

FCC Statement

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits

are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This

equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may

cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in

which case the user will be required to correct the interference at his own expense.

Expected Product Life Cycle: 20 years, Storage Temperature range: –20°F to +70°F, Relative Humidity: range of

5 - 85% RH non-condensing.

Warranty

For a copy of the QSC Limited Warranty, visit the QSC, LLC., website at www.qsc.com.

Para una copia de la Garantía Limitada de QSC, visite el sitio web de QSC, LLC., en www.qsc.com.

Pour obtenir une copie de la garantie limitée de QSC, visitez le site de QSC, LLC., à www.qsc.com.

Besuchen Sie die Webseite von QSC, LLC. (www.qsc.com) um eine Kopie der beschränkten Garantie von QSC zu erhalten.

Para uma cópia da garantia limitada da QSC visite o site da QSC, LLC., em www.qsc.com.

RoHS Statement

The QSC Q-SYS Core 8 FLEX Series is in compliance with European Directive 2011/65/EU – Restriction of Hazardous Substances (RoHS2).

TD-001615-00-A

What's in the Box

(1x)

Q-SYS Core 8 FLEX

or Q-SYS Core NANO

(8x)

Flex

Channels

(blue)

Core 8 FLEX only

(2x)

GPIO

(black)

Core 8 FLEX only

(2x)

RS232 Tx/Rx

(black)

(2x)

Rack-Ear

Cover Label

(2x)

Joining

Plate

(2x)

Rack Spacer

Plate

(2x)

Rack Ear

(6x)

Phillips Pan Head

M4x7mm

(6x)

Phillips Flathead

M3x6mm

(1x)

AC Power cord

(4x)

Foam Spacer

(1x)

QSC Warranty

TD-000453

(1x)

Safety and

Regulatory Statements

TD-001616-00-A

Introduction

The Q-SYS™ Core 8 FLEX is the ideal processing solution for today's smaller and dynamic spaces that utilize an increasing number of network I/O

endpoints, yet still require some highly ﬂexible analog audio and general purpose I/O for legacy device integration.

The Q-SYS™ Core NANO offers purely network AV&C processing designed to support centralized processing for multiple rooms and/or installations

that rely solely on networked, IP-based endpoints providing a signiﬁcant cost savings in applications not requiring analog I/O on the processor.

These platforms extend Q-SYS' reach into more modest every-day projects leveraging all the features available across the entire Ecosystem for use

in applications ranging from Acoustic Echo Canceling (AEC) and sound reinforcement in small to medium meeting or multipurpose rooms, sound

reinforcement in performance venues such as house of worship and theater, background music systems to paging in airports, convention centers

and hospitals.

The Core 8 FLEX and Core NANO are multipurpose software-based audio and control processors in a compact form factor. Core 8 FLEX features

a bank of 8 patented FLEX Channels, each channel independently conﬁgured during design or run time as either a microphone/line level input

or a line level output while the Core NANO utilizes purely network-based I/O. The Core 8 FLEX and Core NANO combine class leading power and

ﬂexibility with specialized I/O such as VoIP, Internal Solid State Drive Playback/Recording and USB audio I/O plus USB A/V bridging.

The Cores' USB device connections enable the processors to appear in a Microsoft Windows or macOS host operating system simultaneously

as both a USB Audio, Video and Communications device supporting up to 8x8 digital audio channels in a ﬂexible, design time conﬁguration

environment that can advertise as multiple virtual USB device instances to the host operating system concurrently over a single physical USB

connection. Additionally, USB Host ports enable the Cores to host external USB devices and future Q-SYS peripheral products.

TD-001615-00-A

Installation

Ventilation

Minimum open space of 6 inches measured from the back of the

Q-SYS Core 8 FLEX or Core NANO

NOTE: In order to provide adequate dissipation

of heat, keep the space directly to the rear of the

Q-SYS Core 8 FLEX

or Core NANO free of

obstacles.

Select the Installation Conﬁguration

Choose one of the following conﬁguration options:

A. One Core 8 FLEX or Core NANO 19-inch Rack (Left or

Right Mount)

B. Two Core 8 FLEXes or Core NANOs 19-inch Rack

C. One Core 8 FLEX or Core NANO Half Rack

D. Under Table or on Wall

TD-001615-00-A

Rack Mounting Options

TD-001615-00-A

Front Panels

123

1. Power LED – illuminates blue when the Q-SYS Core 8 FLEX is

powered on

2. ID LED – LED blinks when placed into ID Mode via ID Button or

Q-SYS Conﬁgurator Software

3. ID Button – Locates the Q-SYS Core 8 FLEX in Q-SYS Designer

GUI and Conﬁgurator. Pressing the ID button for approximately 10

seconds invokes "Reset Network Settings" function.

TD-001615-00-A

Rear Panel

(Note: Q-SYS Core 8 FLEX shown. Q-SYS Core NANO does not include FLEX channels or GPIO)

— Figure 1 —

1. FLEX Channels – eight user-conﬁgurable analog audio

input/output channels, phantom power on inputs.

2. +12 VDC – up to 0.1A source. Connector pins "+".

3. GPIO Outputs – 8 outputs, open collector (24V, 0.2A max.)

with p/u to +3.3V (lower pins 1 – 8).

4. GND – earth ground. Connector pins with ground symbol.

5. GPIO Inputs – 8 inputs, 0-24V analog input or contact closure

(upper pins 1 – 8).

6. RS232 – COM x2. 3-position, 3.5mm connector.

7. USB Type C – USB 3.1, Host port or Device port (Device port

functionally available when USB Type B not in use).

8. USB Type B – USB 3.0, dedicated Device port.

9. LAN A – RJ45, 1000 Mbps, primary, Q-LAN, AES67, Dante,

VoIP, WAN streaming, control.

10. USB Type A – USB 3.0 x2, Host ports.

11. LAN B – RJ45, 1000 Mbps, backup, Q-LAN, AES67, Dante, VoIP,

WAN streaming, control.

12. USB Type A – USB 3.0 x2, Host ports.

13. AC mains – IEC 60320, C14 receptacle, universal power in

(100V – 240V, 50/60 Hz).

TD-001615-00-A

Bottom

Connections

1. Optional Mounting – bosses x2 accommodate

joining plates for side-by-side or surface mounting

installations.

2. Serial Number – product serial number.

3. Agency Declarations

(Note: Q-SYS Core 8 FLEX and Core NANO

share the same bottom attributes)

(Note: For GPIO connections and application examples, refer to "I/O-8 FLEX Technical Note - Using GPIO Inputs and Outputs" available at www.qsc.com.)

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels QSC Matériel réseau

QSC

QSC Q-SYS QIO-ML4i Instructions d'utilisation

Manuels Matériel réseau populaires d'autres marques

Matrix Switch Corporation

Matrix Switch Corporation MSC-HD161DEL Manuel utilisateur

B&B Electronics

B&B Electronics ZXT9-IO-222R2 Manuel utilisateur

Yudor

Yudor YDS-16 Manuel utilisateur

D-Link

D-Link ShareCenter DNS-320L Manuel utilisateur

Samsung

Samsung ES1642dc Instructions d'utilisation

Honeywell Home

Honeywell Home LTEM-PV Instructions de montage

evertz

evertz 7700 Series Manuel utilisateur

D-Link

D-Link ShareCenter DNS-343 Manuel utilisateur

Asante

Asante AsanteBridge 1012 Manuel utilisateur

FireBrick

FireBrick FB2700 Manuel utilisateur

Audiovox Electronics

Audiovox Electronics ARWH2T Manuel utilisateur

ADC

ADC DSX-1 Manuel

NetComm

NetComm NF2 Manuel utilisateur

Alcatel-Lucent

Alcatel-Lucent 5620 Manuel utilisateur

Dell EMC

Dell EMC XC6420 Series Manuel utilisateur

Lanner

Lanner NCA-1020A Manuel utilisateur

Allied Telesis

Allied Telesis AT-TN121-A Manuel utilisateur

Arista

Arista CCA-ETM-Q12 Manuel utilisateur