Pulsar PSD12050 Manuel utilisateur

PSD12050

PSD 12V/5A Desktop type power supply for CCTV

v.2.0

Edition: 10 from 19.05.2023

Supercedes edition: 9 from 22.01.2018 EN

Features of power supply:

power output 5A/12 V DC*

universal AC input voltage range ~100 –240 V

high efficiency 89%

LED optical signalisation

standby power <0,21W

efficiency level: VI

protections:

SCP short-circuit protection

overvoltage protection (AC input)

overload (OLP)

warranty –2 years from production date

1. Technical description.

1.1. General description.

Stabilized DC power supply is intended for supply CCTV cameras that require stabilised voltage of 12V DC.

The unit has a cable with a DC5.5/2.1 plug. When connected to fuse blocks of LB4/xx/xx or LB8/xx/xx family, power supply unit

can feed more cameras (max. 4 or 8). The unit is protected against short-circuit and overload.

1.2. Technical parameters.

Supply voltage

~100 –240 V; 50/60 Hz

Current consumption

1,2 A

Supply power

60 W max.

Efficiency (average)

89%

Efficiency (10% load)

88%

Output voltage

12 V DC

Output current tAMB<30°C

5A - refer to graph 1.

Output current tAMB=40°C

3,5A - refer to graph 1.

Ripple voltage

100mV p-p max.

Short-circuit protection SCP

electronic, automatic recovery

Overload protection OLP

105-150% of power supply, automatic recovery

Optical signalisation

LED –presence of DC voltage

Operation conditions

temperature 0oC - 40oC

relative humidity 20%...90%, without condensation

Dimensions (LxWxH)

116 x 54 (80) x 35 [mm]

Net/gross weight

0,30 / 0,34 [kg]

Protection class EN 62368-1

II (second)

Lenght of DC cable

1,45m + plug DC5,5/2,1 female

Lenght of AC cable

1,15m + mains plug

Storage temperature

-20ºC...+60ºC

* In order to extend the life of the power supply, the load current of 3,5A is recommended.

Graph 1.

Relation between output current and ambient

Fig.1. Dimension of power supply.

*Refer to graph 1

temperature (instantaneous load).

1.3. Accessories.

For power supplies are available accessories - fuse blocks and cable adapter. For details –visit www.pulsar.pl.

2. Installation.

2.1. Requirements.

The power supply shall be mounted by a qualified installer, holding relevant permits and licenses (applicable and required for

a given country) with ~230 V mains supply. Unit should be mounted in confined spaces with normal relative humidity (RH=90%

maximum, without condensing) and temperature from 0°C to +40°C

The power supply shall be mounted in a close casing (a cubicle, a terminal device) and in order to fulfill LVD and EMC

requirements the rules for power supplies, encasing and shielding shall be observed according to application.

2.2. Installation procedure.

1. Connect the DC output to the load/loads.

2. Connect the power supply unit to the AC line. The power supply has to be installed in such way to keep the air flow

around the supply unit.

3. After tests and operation control are performed, the casing (cubicle) shall be closed etc.

3. Maintenance.

Any and all maintenance operations may be performed following the disconnection of the power supply from the power

network. The power supply does not require any specific maintenance procedures, however, in the case of significant level of dust, it

should be cleaned with the compressed air.

WEEE LABEL

Waste electrical and electronic equipment must not be disposed of with normal household waste.

According to European Union WEEE Directive, waste electrical and electronic equipment should

be disposed of separately from normal household waste.

Pulsar sp. j.

Siedlec 150,

32-744 Łapczyca, Poland

Tel. (+48) 14-610-19-45

e-mail: [email protected]

http:// www.pulsar.pl

Autres manuels Pulsar Alimentation

Pulsar

Pulsar PSD12080 Manuel utilisateur

Pulsar

Pulsar EN54-5A17 Manuel utilisateur

Pulsar

Pulsar AWO003PU Manuel utilisateur

Pulsar

Pulsar MS 1012 Manuel utilisateur

Pulsar

Pulsar AWZ 521 Manuel utilisateur

Pulsar

Pulsar PSBOC1554828 Manuel utilisateur

Pulsar

Pulsar DIN 1220 Manuel utilisateur

Pulsar

Pulsar PSD480075 Manuel utilisateur

Pulsar

Pulsar PSR12012 Manuel utilisateur

Pulsar

Pulsar PSBEN 10A12D/LCD Manuel utilisateur

Pulsar

Pulsar BLACK POWER PSBEN 5012E/LCD Manuel utilisateur

Pulsar

Pulsar LB5 Manuel utilisateur

Pulsar

Pulsar HPSBOC 7012D Manuel utilisateur

Pulsar

Pulsar PSAC 04244SEP Manuel utilisateur

Pulsar

Pulsar PS401203 Manuel utilisateur

Pulsar

Pulsar PS-602425 Manuel utilisateur

Pulsar

Pulsar PSC07510 Manuel utilisateur

Pulsar

Pulsar Green Power HPSB 3512C Manuel utilisateur

Pulsar

Pulsar PSBBH 2012 Manuel utilisateur

Pulsar

Pulsar AWZ 230 Manuel utilisateur

Pulsar

Pulsar PSBOC15512110 Manuel utilisateur

Pulsar

Pulsar HPSB 3524C Manuel utilisateur

Pulsar

Pulsar HPSB 2524B Manuel utilisateur

Pulsar

Pulsar HPSB 2512B Manuel utilisateur

Manuels Alimentation populaires d'autres marques

Monacor

Monacor PS-12CCD Manuel utilisateur

VOLTIMA

VOLTIMA MagicBox 15 Manuel utilisateur

Agilent Technologies

Agilent Technologies 6032A Manuel utilisateur

Miller

Miller Auto Deltaweld 452 Manuel utilisateur

BCP

BCP PUOUBK Feuille d'instructions

HC 2210 Manuel utilisateur

Puls

Puls CT5.241 Manuel utilisateur

OCZ

OCZ ZX1250W Manuel utilisateur

iseg

iseg ECH 238 Manuel utilisateur

Power

Power XXL A Series Manuel utilisateur

Agilent Technologies

Agilent Technologies 6631B Manuel utilisateur

Renogy

Renogy PHOENIX 300 Manuel utilisateur

HP 6200B Manuel de service

Epson

Epson Stylus Scan 2500 Manuel d'utilisation

Puls

Puls MiniLine ML50.100 Manuel utilisateur

Puls

Puls AS-Interface SLA4.100 Manuel utilisateur

Kenwood

Kenwood PS-60 Manuel utilisateur

Elmdene

Elmdene G1380xN-y-s Series Manuel utilisateur