MT-602 user manual
5/ 32
Before electrifying, manual confirmation of the agencies operating normally, without hindrance.
Press the red emergency stop switch, and the system power supply is disconnected when there is
emergency.
Installation of mounter
（1）Select the appropriate operating space for placing Mounter
（2）The SMT machine should be placed in a special support frame.
（3）The machine power should be accessed on the labeled INPUT socket.
Debugging Preparation
1. Safety tips of commissioning test
（1）All of components that are working should not be obstructed when operated.
（2）All of components that are working should not be pushed when stopped.
（3）Ensure that the terminal connection is well.
（4）Restart it after 20 seconds when cut off power.
（5）Press the red emergency stop switch and the system power supply is disconnected if there is emergency.
2. Introduce of operation panel
（1）Above panel
1. Emergency stop switch
Press this switch, power is cut off and all actions of mountor machine are stopped. Clockwise rotation,
button bounces and power is on, following that machine resets and each axis return to the original position.
（2）Main panel
1. LCD
2. Buttons
Description of function keys:
When the reference point to identify the state, it is used as the arrow key of mounting head to
control the moving of mounting head. When the reference point to identify the state, it is uesd for
controlling the nozzle’s up and down movement, while other states, functions as shown above picture.
（3）Side panels
1. Cooling fan outlet
2. Access outlet for main power
