PTN COMM-TEC UP-51TS Manuel utilisateur
UP-51TS
Compact Scaler Switcher (with PoH)
All Rights Reserved
Version: 2020V1.4
Compact Scaler Switcher
Preface
Read this user manual carefully before using this product. Pictures shown in this manual is
for reference only, different model and specifications are subject to real product.
This manual is only for operation instruction only, not for any maintenance usage. The
functions described in this version are updated till December 2016. In the constant effort to
improve our product, we reserve the right to make functions or parameters changes
without notice or obligation. Please refer to the dealers for the latest details.
All product function is valid till 2016-12-7.
Trademarks
Product model and logo are trademarks. Any other trademarks mentioned in this manual
are acknowledged as the properties of the trademark owner. No part of this publication
may be copied or reproduced without the prior written consent.
FCC Statement
This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference to
radio communications. It has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a commercial installation.
Operation of this equipment in a residential area is likely to cause interference, in which
case the user at their own expense will be required to take whatever measures may be
necessary to correct the interference.
Any changes or modifications not expressly approved by the manufacture would void the
user’s authority to operate the equipment.
Manufacture
This product is manufactured by:
SHENZHEN PTN Electronics Limited
Add: B6, JinXiongDa Technology Park, HuanGuan Road South 105th
GuanLan Block, LongHua New District
ShenZhen City, 518110, China
Tel: +86-755-2846 1819 - Fax: +86-755-8471 7796
Service: [email protected]
Sales:[email protected]
Website:www.ptn-electronics.com
Comm-tec S.r.l. 2 www.comm-tec.it
Compact Scaler Switcher
SAFETY PRECAUTIONS
To insure the best from the product, please read all instructions carefully before using the
device. Save this manual for further reference.
● Unpack the equipment carefully and save the original box and packing material for
possible future shipment
● Follow basic safety precautions to reduce the risk of fire, electrical shock and injury to
persons.
● Do not dismantle the housing or modify the module. It may result in electrical shock or
burn.
● Using supplies or parts not meeting the products specifications may cause damage,
deterioration or malfunction.
● Refer all servicing to qualified service personnel.
● To prevent fire or shock hazard, do not expose the unit to rain, moisture or install this
product near water.
● Do not put any heavy items on the extension cable in case of extrusion.
● Do not remove the housing of the device as opening or removing housing may expose
you to dangerous voltage or other hazards.
● Install the device in a place with fine ventilation to avoid damage caused by overheat.
● Keep the module away from liquids.
● Spillage into the housing may result in fire, electrical shock, or equipment damage. If an
object or liquid falls or spills on to the housing, unplug the module immediately.
● Do not twist or pull by force ends of the optical cable. It can cause malfunction.
● Do not use liquid or aerosol cleaners to clean this unit. Always unplug the power to the
device before cleaning.
● Unplug the power cord when left unused for a long period of time.
● Information on disposal for scrapped devices: do not burn or mix with general
household waste, please treat them as normal electrical wastes.
Comm-tec S.r.l. 3 www.comm-tec.it
Compact Scaler Switcher
Contents
Introduction 6
Introduction to the Scaler Switcher 6
Features 6
Package List 6
Panel Description 8
Front Panel 8
Rear Panel 9
System Connection 11
Usage Precautions 11
System Diagram 11
Connection Procedure 11
Connection of Microphone 12
Application 14
System Operations 15
Front Panel Buttons 15
Manual-Switching 15
Auto-Switching 15
Volume Adjusting 16
IR Control 16
IR Remote 16
Control far-end device from local 16
4.2.3 Control local device from remote 17
CEC Function 18
RS232 Control 19
Installation/uninstallation of RS232 Control Software 19
Basic Settings 19
RS232 Communication Commands 21
Control Compact Scaler Switcher or 3rd Party Device from Local 28
Control Compact Scaler Switcher or 3rd party device form Remote 28
OSD Menu Control 29
OPTIONS 30
PICTURE 31
SETUP 32
Comm-tec S.r.l. 4 www.comm-tec.it
Compact Scaler Switcher
1. Introduction
1.1. Introduction to the Scaler Switcher
The Scaler Switcher is a compact mini scaler switcher with 5 video inputs (1 HDMI/MHL, 2
HDMI, 1 DP, and 1 VGA) and 3 audio inputs (1 DP external audio, 1 VGA auxiliary audio, 1
MIC audio). The VGA input supports VGA, YPbPr and C-video, so the scaler switcher is
compliant with multiple video signals.
The Scaler Switcher scales & switches any video signal to HDMI output and HDBaseT
output (supports PoH and connects to an HDBaseT Receiver, up to a maximum
transmission distance of 70 meters.
With 1 IR IN, 1 IR OUT & 1 RS232, the IR & RS232 signals can be transmitted
bi-directionally between the Scaler Switcher and the HDBaseT Receiver.
In addition, The Scaler Switcher can be controlled via front panel buttons, IR remote,
RS232 commands and web-based GUI.
1.2.Features
▪ Compliant with HDMI1.4& HDCP2.2.
▪ Supports CEC, with commands to enable/disable this function.
▪ Supports video source auto-switching function.
▪ Bi-directional IR & RS232 control.
▪ Output resolutions selectable to assure preferred output, and supports various output
resolutions, such as 1920x1200, 1920x1080, 1600x1200, 1600x900, 1360x768,
1280x800, 1280x720, 1024x768.
▪ VGA video supports C-video, YPbPr and VGA.
▪ 48V phantom power to support condenser microphone.
▪ MIC port supports balance/unbalance signal, suppress the external noise effectively.
▪ 3-level MIC input, supports condenser microphone, dynamic microphone and wireless
microphone.
▪ Controllable via buttons, IR remote, RS232 & Web-based GUI.
▪ Powerful OSD function.
▪ Supports online software upgrading.
1.3.Package List
Part 1
▪ 1 x Compact Scaler Switcher
▪ 2 x Mounting Ears with 4 Screws
▪ 4 x Plastic Cushions
Comm-tec S.r.l. 6 www.comm-tec.it
Compact Scaler Switcher
▪ 1 x Power Adapter (24VDC,2.71A)
▪ 1 x IR Remote
▪ 1 x VGA Converting Cable (VGA to YPbPr)
▪ 2 x 3-Pin Phoenix Connectors
▪ 1 x 5-Pin Phoenix Connector
▪ 1 x IR Emitter
▪ 1 x IR Receiver (with carrier wave)
Part 2
▪ 1 x HDBaseT Receiver
▪ 2 x Mounting Ears with 4 Screws
▪ 4 x Plastic Cushions
▪ 1 x RS232 Cable (3-Pin to DB9)
▪ 1 x User Manual
Note
：
Please confirm if the product and the accessories are all included, if not, please
contact with the dealers.
Comm-tec S.r.l. 7 www.comm-tec.it
Compact Scaler Switcher
2. Panel Description
2.1. Front Panel
1 Built-in IR Receiver
2 Power indicator
▪ Off when there is no power to the device.
▪ Red when the device is in standby mode.
▪ Green when the device is powered on.
3 1-HDMI/MHL input Selector & Activity LED; Left key
4 2-HDMI input Selector & Activity LED; Right key
5 3-HDMI input Selector & Activity LED; Up key
6 4-DisplayPort input Selector & Activity LED; Down key
7 5-VGA input Selector Activity LED; Enter key
8 Auto-Switching Mode Selector & Activity LED; OSD menu button
▪ Press this button to enter or exit Auto-switching mode, in this mode, select input source
via front panel button is not available, but RS232 command and IR remote are able to
switch mode. The auto LED turn green and keep on.
Note:
When you set any VGA port to C-video or YPbPr in Manual-switching mode, the
system will not be able to enter Auto-switching mode.
▪ Long-press this button more than 2 seconds to enter OSD menu, and then use
③~⑥direction keys, ⑦confirm key to control.
9 Volume Knob
Note:
Pictures shown in this manual are for reference only, different model and
specifications are subject to real product.
Comm-tec S.r.l. 8 www.comm-tec.it
Compact Scaler Switcher
2.2. Rear Panel
1 INPUTS
▪ Video input ports: 1 HDMI/MHL input, 2 HDMI inputs, 1 DP and 1 VGA
▪ Audio input ports: 1 DP external audio input and 1 VGA auxiliary audio input.
2 OUTPUTS
▪ HDMI output: HDMI video output port
▪ HDBaseT output: Support PoH. Connect with an HDBaseT Receiver to transmit AV
signal or IR/RS232 control signal.
HDBaseT output boasts green and yellow indicator. The green indicator will blink when
power. If connect an HDBaseT receiver to this output successfully, the yellow indicator
will light up, and the green indicator will keeps blinking.
3 MIC INPUT
▪ MIC audio port: connect to Microphone.
▪ Dial switch: including 3 level
✧48V phantom power mode (connect with condenser microphone);
✧MIC mode (connect with dynamic microphone);
✧LINE mode (connect with wireless microphone or line audio).
4 CONTROL
▪ RES RESET: press this button to reset the output resolution to 1280×720p, or
activate HDMI and HDBT outputs when they are closed.
▪ IR IN: connect with IR receiver (with carrier wave only) to receive IR signal to
control far-end device which was connected to HDBaseT Receiver via HDBaseT
output port.
▪ IR OUT: connect with IR emitter to control local source devices from remote.
▪ IR EYE: connect with IR receiver (with carrier wave only) to receive IR signal send
by IR remote to control this Scaler Switcher.
▪ FIRMWARE: Type-A USB port for updating system firmware or loading customized
EDID data.
▪ RS232: Serial port, 3-pin phoenix connector, connect with a control device (such
as PC) to control the Scaler Switcher or other devices connected with HDBaseT
Comm-tec S.r.l. 9 www.comm-tec.it
Compact Scaler Switcher
Receiver.
▪ TCP/IP: Ethernet port, connect with PC to control the Scaler Switcher via
Web-based GUI.
5 AUDIO OUTPUT
▪ Audio output port, the audio comes from the input audio corresponding to the
selected video source and is mixed with MIC audio.
6 DC 24V
▪ Power port, connect with DC 24V power adapter.
Note:
Pictures shown in this manual are for reference only, different model and
specifications are subject to real product.
Comm-tec S.r.l. 10 www.comm-tec.it
Table des matières
Autres manuels PTN Changer
PTN
PTN WVG2AL USB Manuel utilisateur
PTN
PTN WVG16A Manuel utilisateur
PTN
PTN MV4 Manuel utilisateur
PTN
PTN SC121D-TN Manuel utilisateur
PTN
PTN SCU42T-CODEC Manuel utilisateur
PTN
PTN PS121 Manuel utilisateur
PTN
PTN WUH4ARC-8K Manuel utilisateur
PTN
PTN SC91DM Manuel utilisateur
PTN
PTN WVG2AL USB Manuel utilisateur
PTN
PTN WHD4 Manuel utilisateur
PTN
PTN WVG4A Manuel utilisateur
PTN
PTN WUH4A Manuel utilisateur
PTN
PTN TPUH408TU-UK Manuel utilisateur
PTN
PTN WVG2A Manuel utilisateur
PTN
PTN MDV Series Manuel utilisateur
PTN
PTN WHD4 Manuel utilisateur
PTN
PTN SC51D Manuel utilisateur
PTN
PTN SC121D-TN Manuel utilisateur
PTN
PTN WVG8A Manuel utilisateur
PTN
PTN SC91DM Manuel utilisateur
