Psion Ikon CH6020 Manuel utilisateur
Page 1 of 2 Part No. 1081132 Revision D
Installation Instruction Ikôn Handstrap & Tether
A. Handstrap Installation
1. Assemble Handstrap to Ikôn handheld by looping Velcro tab around pin and adhering to Velcro pad.
2. Remove bracket and screws from Ikôn.
3. Slide bracket through Nylon Loop on handstrap and install screws.
Adjust handstrap by pulling up Velcro Tab and readjusting to your hand as needed.
1. 2. 3.
Page 2 of 2 Part No. 1081132 Revision D
B. Tether Installation
1. Assemble Tether to Ikôn Telescopic Stylus (a) Thread tether cord through stylus opening. (b) Pull
slipknot on tether through stylus FIRMLY. (c) Make sure metal crimp is flush in stylus opening.
2. Assemble to handstrap (a)Thread tether through eyelet on strap (b) Pass stylus through tether loop and
(c) pull tether snug.
3. Slip stylus into elastic for holder.
(c)(a) (b)
(a) (b) (c)
COMPANY HEADQUARTERS AND CANADIAN SERVICE CENTRE
PSION
2100 Meadowvale Boulevard, Mississauga
Ontario, Canada L5N 7J9
Tel: +1 905 813 9900
Fax: +1 905 812 6300
E-mail: [email protected]
www.psion.com
www.ingenuityworking.com
Table des matières
Manuels Accessoires pour scanner populaires d'autres marques
HP
HP Scanjet 5370C Series Mode d’emploi
imacon
imacon Flextight Damaged Original Kit Manuel utilisateur
ARS-Imago
ARS-Imago POLAROID SCAN MASK Manuel utilisateur
Epson
Epson B813112 Manuel d'utilisation
Datalogic
Datalogic GFC-2 00 Series Manuel utilisateur
Colortrac
Colortrac MK4 UNIVERSAL REPRO STAND Manuel utilisateur
