PSI PP 4050 Manuel utilisateur

User's Manual

P P 4 0 5 0

P P 4 0 5 0 X P

P P 4 0 5 0 M I C R

P P 4 6 5 0

5112 991 15506

Acknowledgements

PCL is a Trademark of Hewlett-Packard Company.

A Publication of PSi Laser GmbH

Eiserfelder Straße 316

57080 Siegen @Germany

http://www.psi-laser.de

Version: 5112 991 15506 August 2009

Great care has been taken to ensure that the information in this handbook is accurate and complete.

However, should any errors or omissions be discovered or should any user wish to make suggestions for

improving this handbook, please feel encouraged to send us the relevant details.

The contents of this manual are subject to change without notice.

All rights strictly reserved. Reproduction or issue to third parties in any form is not permitted without

written authorization from the publisher.

Safety Regulations for the Laser Printer PP 4x50 and

PP 4050XP and the intelligent Paper Stacker iPS 4050E

The LED printers PP 4050, PP 4050MICR, PP 4050XP, PP 4650 and the

intelligent Paper Stacker iPS 4050E fulfils the safety regulations according to

IEC, VDE/GS, and UL / C-UL for information technology equipments (EN 60950,

UL 1950 3rd Edition / CAN/CSA C22.2 No 950-95).

Note: The commercial name of the iPS 4050E is iPS 4050/4060).

The mains cable must be connected to a ground protected wall-socket. The

printer's voltage has to be in accordance with the local mains voltage.

The power plug must be easily accessible at any time so that it can be

disconnected immediately in case of danger or for maintenance purposes.

Before installing the printer, check the surrounding conditions in which the

printer is intended to be used (see next page, Operating Environment).

During thunderstorm you should never attempt to connect or disconnect any

data transfer cable.

The power supply should only be opened and checked by authorized personnel.

Maintenance beyond the descriptions of chapter 5 may only be attempted by

authorized personnel. Repairs done inappropriately may seriously jeopardize

the user's safety.

Attention: This symbol is standing for a hot surface - danger

of burning!

Safety Regulations

Electromagnetic Compatibility

We certify that the equipment at issue,

Type: Printer PP 4050, PP 4050MICR, PP 4050XP, PP 4650 and the

intelligent Paper Stacker iPS 4050E

corresponds to the laws and regulations ruling electromagnetic compatibility of

appliances (89/336/EWG) and, therefore, fulfils the requirements for conformity

marking with the CE-sign.

To guarantee that the device stays within the limits according to the approval

regulations for conducted and radiated emission (EN 55022, Class B) and

immunity (EN 55024) in any case shielded interface cables are to be used only.

Note: This equipment has been tested and found to comply with the limits for a

CLASS A digital device pursuant to Part 15 of the FCC Rules. These

limits are designed to provide reasonable protection against harmful

interference when the equipment is operated in a commercial

environment. This equipment generates, uses, and can radiate radio

frequency energy and, if not installed and used in accordance with the

instruction manual, may cause harmful interference to radio

communications. Operation of this equipment in a residential area is

likely to cause harmful interference in wich case the user will be required

to correct the interference at his own expense.

Changes and modifications not explicitly allowed by the equipment's

manufacturer could void the user's authority to operate the equipment.

Operating Environment

Avoid installing the printer where it is exposed to moisture or heat (eg. direct

sunlight).

The printer is designed to operate in a wide range of environmental conditions.

STemperature: + 15°C to + 35°C (+59°F to + 95°F)

SHumidity: 30% to 50%

For best performance, store and use fanfold paper at 19Eto 23°C (68°to 73°F)

and a relative humidity of 33 to 47 percent.

Note: In case of higher values for temperature and humidity the print quality

will degrade!

Safety Regulations

III

Power Requirements

S100 - 110 V (-10/+6%) AC, 12 A (average)

S110 - 120 V (-10/+6%) AC, 12 A (average)

S220 - 240 V (-10/+6%) AC, 6 A (average)

S50 - 60 Hz

Note: To avoid an overload of the electric circuit support (particularly for 100 to

110 or 110 to 120V) connect the power supply plug of the printer into a

separate protected power wall socket.

Power Consumption

SOperating power < 1.200 Watt average; (<1.650 W peak during

Warming Up)

SOperating current < 100 Watt

SPower save #45 W

Notes: Slots and openings in the printer's housing are provided for

ventilation. Always ensure that these openings are not obstructed.

Also ensure that the cables of the printer do not interfere with the

output paper path.

During the printing process ozone will be produced. Take care that

the printer is standing in a room with good ventilation. The limt of

ozone concentration should be 0,1 ppm (0,2 mg/m

). Note that the

specific gravity of ozone is higher than that of air.

Caution: Danger of explosation if battery is incorrectly replaced!

Replace only with the same or equivalent type recommended by the

manufacturer. Dispose of used batteries according to the batteries

manufacturer´s instructions.

The intelligent Paper Stacker iPS 4050E can only be used in conjunction with

the printer PP 4050, PP 4050MICR, PP 405XP, PP 4060 or PP 4650.

Caution: Connector not located in limited Power Source! Only for connecting

Paper Stacker (iPS 4050E). Refere to User´s Manual.

Safety Regulations

Moving lift can crush.

Keep feet clear.

See instructions manual.

Caution, the chain of the motor to move the paper exit tray

up and down will start automatically or after pushing the

key at the front side of the table.

Caution, the paper exit tray moves up and down

automatically or after pushing the key at the front

side of the table. Keep your feet clear when the

paper exit tray moves down. Ensure that the cables

at the rear of the printer do not interfere with the

paper path within the stacker.

The feet of the laser printer PP 4050, PP 4050MICR, PP 4050XP or PP 4650

should be positioned into the depressions of the stacker's table.

Note: Open windows, airing, and also draught disturb the paper flow!

Table of Contents

Preface ..................................................... XIII

AboutthisManual ............................................. XIII

Conventions Used in this Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . XIV

1. Installing the Printer and intelligent Paper Stacker .............. 1-1

1.1 Requirements to the location of the printer .................. 1-1

1.1.1 Environmental Conditions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1

1.2 A First Look at the Device ................................ 1-4

1.3 Installing the intelligent Paper Stacker ..................... 1-5

1.3.1 Check delivery for Completeness . . . . . . . . . . . . . . . . . . . . . . . . . 1-5

1.4 Installing the Printer ..................................... 1-6

1.4.1 Check delivery for Completeness . . . . . . . . . . . . . . . . . . . . . . . . . 1-6

1.4.2 Put the Printer onto the intelligent Paper Stacker (iPS) . . . . . . . . 1-6

1.4.3 Interconnect the Printer and iPS 4050/4060 . . . . . . . . . . . . . . . . . 1-8

1.4.4 Mount the Pendulum of the iPS 4050/4060 . . . . . . . . . . . . . . . . . 1-9

1.4.5 Remove the Transport Locks . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-11

1.5 Installation of the Consumables .......................... 1-12

1.5.1 Loading the Developer Unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-12

1.5.2 LoadingtheToner.................................... 1-13

1.5.3 Inserting the Waste Toner Bottle . . . . . . . . . . . . . . . . . . . . . . . . 1-14

1.5.4 Inserting the Cleaner Felt . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-15

1.5.5 Inserting the Ozone Filter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-16

1.5.6 Installing the PC Cartridge (OPC) . . . . . . . . . . . . . . . . . . . . . . . . 1-17

1.6 Connection to a Computer or to a Network ................. 1-18

1.6.1 PP 4050 Parallel Interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-18

1.6.2 PP 4050XP / PP 4650 Parallel and Ethernet Interface . . . . . . . . 1-18

1.7 Power ON/OFF Switch .................................. 1-19

Table of Contents

1.8 Handling of the Tractor Cassettes ........................ 1-20

1.9 Inserting Fanfold Paper ................................. 1-21

- Inserting paper for the first time or changing to another paper width 1-22

1.10 Operating the intelligent Paper Stacker (iPS) ............... 1-23

1.10.1 Adjusting the Paper Exit Tray . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-23

1.10.2RemovePaper ...................................... 1-24

2. Printer Operation .......................................... 2-1

2.1 Control Panel .......................................... 2-1

2.1.1 Description of the two Indicators . . . . . . . . . . . . . . . . . . . . . . . . . . 2-1

2.1.2 Description of the Panel Display . . . . . . . . . . . . . . . . . . . . . . . . . . 2-2

2.1.3 FunctionKeys ........................................ 2-6

2.2 Menu Mode ............................................ 2-7

2.2.1 ToActivatetheMenu .................................. 2-8

2.2.2 To Confirm and Save Selection . . . . . . . . . . . . . . . . . . . . . . . . . . 2-9

2.2.3 Example to Change the Language at the Control Panel . . . . . . 2-10

2.3 Status and Error Messages .............................. 2-11

3. Configuring the Printer ..................................... 3-1

3.1 What is Configuring? .................................... 3-1

3.1.1 Profiles ............................................. 3-1

SProfiler 4050 and Profiler 4050/4060 . . . . . . . . . . . . . . . . . . . . . . 3-2

3.1.2 Basic Printer Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-2

3.1.3 TestMode........................................... 3-2

3.2 Printout of Standard Configuration ........................ 3-3

3.2.1 How to Start the SELF TEST . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-4

3.3 Printout of the Profiles ................................... 3-6

3.4 Menu Structure ......................................... 3-7

Table of Contents

VII

3.5 Menu Mode Item Description .............................. 3-9

SOFFLINEMode ......................................... 3-9

SSelectProfile ........................................... 3-9

SPaperMenu ........................................... 3-10

SPCLMenu............................................. 3-12

SHexdumpMenu ........................................ 3-13

SGeneralMenu.......................................... 3-14

SConfigMenu ........................................... 3-15

SClock Menu (only PP 4050XP/PP 4650) . . . . . . . . . . . . . . . . . . . . . 3-16

STestMenu............................................. 3-16

SInfoMenu ............................................. 3-17

3.6 Configuration Programs ................................ 3-18

SProfiler ............................................... 3-18

SInterCon-NetTool ....................................... 3-18

4 Explanation of Individual Menu Items ......................... 4-1

4.1 Menu Mode SELECT PROFILE ............................. 4-3

4.2 Menu Mode CHANGE PROFILE ............................ 4-3

4.2.1 PAPER MENU ....................................... 4-3

SPAPER .......................................... 4-3

SPAPERLENGTH................................... 4-4

SLENGTHFACTOR ................................. 4-4

SIMAGEWIDTH .................................... 4-5

SSOURCE ......................................... 4-5

SDESTINATION .................................... 4-5

SORIENTATION .................................... 4-6

SLANDSCAPEMODE................................ 4-7

SORIENT.MODE ................................... 4-8

SPAPEREXTENDED ................................ 4-9

SPAPERSELECTION................................ 4-9

SPAPERPATHSELECT. ............................. 4-9

SFUSERTEMP. ................................... 4-10

STONERDENSITY ................................. 4-10

SVERSHIFT ...................................... 4-10

SHORSHIFT ...................................... 4-10

SCUTSHIFT ...................................... 4-10

Table of Contents

VIII

SINT.LINEREGISTR................................ 4-11

4.2.2 PCL MENU ......................................... 4-12

SFONTNUMBER .................................. 4-12

SPITCH .......................................... 4-12

SPOINTSIZE ..................................... 4-12

SSYMBOLSET .................................... 4-13

SLINESPACING ................................... 4-14

STOPMARGIN .................................... 4-14

SLEFTMARGIN ................................... 4-14

SRIGHTMARGIN .................................. 4-14

STEXTLENGTH ................................... 4-14

SPERF.SKIP ..................................... 4-14

S$$COMMANDS .................................. 4-15

4.2.3 HEXDUMP MENU ................................... 4-15

SUELCOMMAND .................................. 4-15

4.2.4 GENERAL MENU .................................... 4-16

SEMULATION ..................................... 4-16

SAUTOFORMFEED ............................... 4-16

SAUTOMATICCUT................................. 4-16

SJOBSEPARATION ................................ 4-17

STRACTORCHANGE CUT .......................... 4-17

SREPRINTLASTPAGE ............................. 4-18

4.3 Menu Mode BASIC SETTINGS ............................ 4-19

4.3.1 CONFIG. MENU ..................................... 4-19

SPOWERSAVE ................................... 4-19

SKEEPTEMP.HIGH................................ 4-19

SALARMBELL .................................... 4-20

SLANGUAGE ..................................... 4-20

SMENUACCESSS ................................. 4-20

SHOSTCHANNEL ................................. 4-21

STRACTORPOOL ................................. 4-21

SCMC7BarWidth .................................. 4-21

SRECALLFACTORY ............................... 4-21

SRESET DEVELOPER INFO . . . . . . . . . . . . . . . . . . . . . . . . . 4-23

Table of Contents

SRESETOPCINFO. ................................ 4-23

SRESETFUSERINFO .............................. 4-23

4.3.2 ClockMenu............................................ 4-23

4.4 Menu Mode TEST MODE ................................. 4-24

4.4.1 TEST MENU ........................................ 4-24

SPANELTEST .................................... 4-24

SSELFTEST ...................................... 4-24

SCONTSELFTEST ................................ 4-24

SCONFIG.PRINT .................................. 4-24

SPCLTYPEFACELIST .............................. 4-25

4.4.2 INFO MENU ........................................ 4-27

SENGINEID ...................................... 4-27

SFIRMWAREVERSION ............................. 4-27

SSTACKERVERSION .............................. 4-27

SPANELVERSION ................................. 4-27

SDEVELOPERINFO................................ 4-27

SOPCINFO ....................................... 4-27

SFUSERINFO..................................... 4-27

5 Maintenance .............................................. 5-1

5.1 Installing the Parts of the Toner Kit ........................ 5-1

5.1.1 RefillingtheToner..................................... 5-2

5.1.2 Replacing the Waste Toner Bottle . . . . . . . . . . . . . . . . . . . . . . . . 5-4

5.1.3 Changing the Cleaner Felt . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-5

5.1.4 Replacing the Ozone Filter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-7

5.2 Installing the Parts of the Developer Kit ..................... 5-8

5.2.1 Replacing the Developer Unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-8

5.2.2 Replacing the Transfer Charger Unit . . . . . . . . . . . . . . . . . . . . . 5-10

5.2.3 Replacing the Ozone Filter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-11

Table of Contents

5.3 Installing the Parts of the Fuser Kit ....................... 5-12

5.3.1 Replacing the Fuser Unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-13

5.4 Replacement of the PC Cartridge (OPC) . . . . . . . . . . . . . . . . . . . . . 5-14

5.5 User Preventive Maintenance ............................ 5-16

5.5.1 Cleaning the Paper Path . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-16

5.5.2 Cleaning the Transfer Charger Unit . . . . . . . . . . . . . . . . . . . . . . 5-18

5.5.3 Cleaning the Ozone Filter below the Transfer Charger . . . . . . . 5-19

5.5.4 Cleaning the Ozone Filter in the Top Cover . . . . . . . . . . . . . . . . 5-20

5.5.5 ToolsforCleaning.................................... 5-21

5.5.6 Cleaning the Corona Wire . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-22

5.5.7 Cleaning the TPS Sensor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-24

6 Trouble Shooting and Diagnostics ............................ 6-1

- HowtoUsethisSection ................................... 6-1

6.1 Power-related Problems ................................. 6-2

6.2 Status and Error Messages ............................... 6-2

7 Technical Data ............................................ 7-1

7.1 Printer Specification .................................... 7-1

7.2 Connectivity ........................................... 7-3

7.3 Paper Handling ......................................... 7-3

7.3.1 FanfoldPaper ........................................ 7-4

7.4 Control Unit ............................................ 7-4

7.5 Consumables .......................................... 7-4

7.6 Options ............................................... 7-4

8 Paper Specification ........................................ 8-1

8.1 Basic Theory of Operation ................................ 8-1

8.2 Storing Media .......................................... 8-1

8.3 Environmental Considerations ............................ 8-2

8.4 Guidelines and Specification for Selected Fanfold Paper ...... 8-2

8.4.1 GeneralGuidelines .................................... 8-3

SQuality.............................................. 8-3

SBasicweight ......................................... 8-3

STransportholes....................................... 8-4

SPerforation .......................................... 8-5

Table of Contents

8.4.2 Typical Paper Properties for Laser Printer . . . . . . . . . . . . . . . . . . 8-6

8.4.3 Paper / Form Properties . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-7

8.4.4 Label Carrier Properties . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-9

8.4.5 LabelProperties ..................................... 8-10

9 Maintenance / Logbook ..................................... 9-1

9.1 TonerKit ............................................ 9-1

9.2 PC-Cartridge(OPC) ................................... 9-3

9.3 DeveloperKit ........................................ 9-4

9.4 FuserKit ............................................ 9-5

9.5 InspectionReport ..................................... 9-6

9.6 CustomerRemarks.................................... 9-7

Appendix A Programming Guide ............................... A-1

A-1 Support of Printer Specific Feature and Functions ......... A-2

SA-1.1 Profiles .......................................... A-2

SA-1.2 PaperSizeSelect .................................. A-2

SA-1.3 PaperPathControl ................................. A-3

SA-1.4 Semigraphics Support under SAP R/3 . . . . . . . . . . . . . . . . . . A-3

A-1.5 EURO Symbol Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-3

A-1.6 Support of Logical and Physical Pages . . . . . . . . . . . . . . . . . . A-4

A-1.7 Support of Job Separation . . . . . . . . . . . . . . . . . . . . . . . . . . . A-5

A-1.8 Conventions ...................................... A-6

A-2 List of Supported PJL Control Functions ................. A-7

A-2.1 Basic Rules for PJL Programming . . . . . . . . . . . . . . . . . . . . . A-7

A-2.1.1 PJLSytaxRules.............................. A-7

A-2.1.2 PJL Environments . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-8

A-2.1.3 List of supported PJL Commands . . . . . . . . . . . . . . . . A-9

A-2.1.4 List of supported PJL Variables and Values . . . . . . . A-12

A-2.1.5 List of supported PJL Variables and Values

forPCLPersonality .......................... A-15

A-3 List of supported PCL5 Control Functions ............... A-16

A-3.1 Job Control Commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-16

A-3.2 Page Control Commands . . . . . . . . . . . . . . . . . . . . . . . . . . . A-17

A-3.3 Cursor Positions Commands . . . . . . . . . . . . . . . . . . . . . . . . A-19

A-3.4 Font Selection Commands . . . . . . . . . . . . . . . . . . . . . . . . . . A-21

A-3.5 Font Management Commands . . . . . . . . . . . . . . . . . . . . . . . A-22

XII

A-3.6 Macro Control Commands . . . . . . . . . . . . . . . . . . . . . . . . . . A-23

A-3.7 GraphicCommands ............................... A-24

A-3.8 Status Readback Commands . . . . . . . . . . . . . . . . . . . . . . . . A-25

A-4 Support for Semigraphics for SAP/R3 .................. A-26

A-5 Bar Code Programming .............................. A-27

A-5.1 Resident Bar Code Font Code 39 HP Compatible . . . . . . . . A-27

A-5.2 Resident Bar Code Controlled by

Private Command Sequence . . . . . . . . . . . . . . . . . . . . . . . . A-28

A-5.2.1 Programming ............................... A-29

SBar code print position . . . . . . . . . . . . . . . . . . . . . . . . . . . A-29

SBar code print orientation . . . . . . . . . . . . . . . . . . . . . . . . A-29

SBarcodetype ................................. A-30

SBarcodehight ................................. A-31

SBarcodedata ................................. A-31

SBarcodetextcontrol ............................ A-32

SBar code module width . . . . . . . . . . . . . . . . . . . . . . . . . . A-32

SBarcoderatio ................................. A-33

SStart and Stop characters . . . . . . . . . . . . . . . . . . . . . . . . A-34

SError checking characters . . . . . . . . . . . . . . . . . . . . . . . . A-34

SUnprintedareas ................................ A-34

A-5.3 Bar Code Programming Examples . . . . . . . . . . . . . . . . . . . . A-35

SCode39 ........................................ A-35

S2of5industrial ................................... A-35

S2of5interleaved ................................. A-36

SEAN8SC2 ...................................... A-36

SEAN8SC6add2 ................................. A-37

SEAN8SC9add5 ................................. A-38

SEAN13SC2 ..................................... A-39

SCodabar ........................................ A-39

SCode128 ....................................... A-40

SPostnet ......................................... A-41

SRMS4SCC/KIX ..................................A-41

Appendix B Symbol Sets ...................................... B-1

Preface

XIII

Preface

About this Manual

This manual covers the printer in combination with the interface module, the

Personality Module. The Personality Module (PM) is an integral part of the

printer which determines the functionality of the printer especially regarding the

user and system interface.

The structure of this manual is such that the operator is led step-by-step through

the various procedures. Starting with unpacking and installation of the

consumables it moves on to setting-up configuration parameters and ends with

the mounting of options.

The manual is divided into the following chapters:

1. Installing the Printer and intelligent Paper Stacker

This chapter covers the information about the basic elements of the printer.

The next steps show how to power on the printer, the handling of the tractor

cassettes, inserting fanfold paper, and how to operate the intelligent Paper

Stacker (iPS 4050).

2. Operating the Printer

This chapter discusses in great detail the operation of the control panel, all

menu functions, and the general operation of the menu. General status

messages are also described.

3. Configuring the Printer

This chapter explains how to use the Profiles and to configure the printer so

that it can communicate with the corresponding system environment.

Furtheron this chapter includes a view of the Menu Structure and thoroughly

describes in a short form the printer's operating controls. Finally you will find

a description of the Configuration Programs Profiler 4050 and Profile

Selector 4050. The Profiler 4050 is a menu controlled program and

supported the printer configuration via PC. Different configurations can be

downloaded into the printer.

Profile Selector 4050 is a program for quick access to a profile.

Preface

XIV

4. Explanation of Individual Menu Items

In this chapter are the individual menu items are explained in detail.

5. Maintenance

This chapter explains how to replace the consumables and maintain the

printer.

6. Trouble Shooting and Diagnostics

suggests how to identify and correct simple problems.

7. Technical Data

All technical details or data about the printer can be found here.

8. Paper Specification

Guidelines, Specification, Paper and Label properties are defined in this

chapter.

9. Maintenance / Logbook

All activities of maintenance should be written down here.

Preface

Appendix A Programming Guide

This appendix describes command extension of PCL5 and PJL in section 2

and 3. Bar Code Programming is described in section 5.

Appendix B Symbol Sets

All supported Symbol Sets are listed.

Appendix C Miscellaneous

SOrder Numbers

SPrinter Driver

Preface

XVI

Safe Energy

The PP 4x50 printer models have a special feature to save power. After a

specified period of inactivity, the printer changes to a low power state. When a

print job is received, the printer resumes the operating mode. This function is

changeable in the Configuration Menu with the item POWER SAVE. Standard

setting is 15 minutes.

Conventions Used in this Guide

The following conventions are used:

Bold Headlines and important information.

Note: Contains special advice to facilitate handling.

Caution: Contains important information to prevent damage

of the equipment.

[ENTER] Key functions are always depicted in brackets or

indicated by the corresponding symbol e.g. .

The use of LEFT and RIGHT always assumes you are viewing the front i.e. the

control panel of the printer. For instance, the paper input is at the LEFT side of

the printer.

16614

1-1

Installing the Printer and intelligent Paper Stacker

1.1 Requirements to the location of the printer

In this chapter the preconditions are described concerning the environment, the

physical prerequisites, and the demand for space which are required for

installation of the printer.

1.1.1 Environmental conditions

STemperature and Humidity

The following table shows the values of temperature and relative humidity

which are specified for the printer and its consumables.

Temperature Relative Humidity

Print operation *

Optimum range

+ 19 to + 23°C

+ 68 to + 73°F

33 to 47%

Print operation

Extended range

+ 15 to + 35°C

+ 56.5 to + 86°F

30 bis 50%

Transport and Storage

of the printer

- 10 to + 40°C

- 4 to + 104°F

max. 95%

(at + 40°C or + 104°F)

Transport and Storage

of the consumables **

- 10 to + 40°C

- 4 to + 104°F

max. 95%

(at 40°C or 104°F)

Storage of fanfold

paper

+ 19 to + 23°C

+ 68 to + 73°F

33 to 47%

* The photoeletrical process in a laser printer is influenced by the climatic

conditions of the environment. The herewith specified values define a

climate in which an optimal print quality is ensured. Operating the printer

outside this range may lead to a reduction of the print quality.

** It is recommended to store the consumables at a cool and dark location.

SAltitude

The printer can be used at an altitude up to 2,135 m (7,000 ft.).

Installing the Printer and the intelligent Paper Stacker

1-2

SAir circulation

In general there are no restrictions concerning air circulation. However, it is

to be observed that the air flow does not move the fanfold paper heavily at

the paper entry and paper exit of the printer and such may lead to paper

jams.

In conjunction with the paper stacking system care has to be taken that the

air flow does not disturb a proper operation of the stacker.

SImpact of Light and Sunshine

Since the printer is equipped with a light-sensitive photoconductor drum and

optical sensors it shall in generally not be installed at a location which is

exposed to sunlight. If not otherwise possible window shades have to

provide for the necessary protection.

Note: The printer must never be installed such that its right side (paper

exit) points to a window.

If the top cover is opened to clear a paper jam or to perform maintenance

actions sunbeams would directly fall onto the photoconductor drum and

would permanently destroy its surface after an impact period of about 1

minute.

SAcoustical Noise

The upper limits of the acoustical noise are shown below.

SPrint Operation < 55 dB(A)

SStand-by < 48 dB(A)

SPower Dissipation

If an interruption of a print operation occurs the printer can enter the Power

Save mode when for a certain period of time whose duration is selected at

the operator panel the printer does not perform any further operation. In this

mode most of the printer´s subsystems are disconnected from power. The

operating mode is resumed when the printer receives further data from the

host system.

Mode Power Consumption

Operating < 1,200 Watt average

< 1,650 Watt max.

Stand-by < 100 Watt

Sleep Mode (Power Save) < 45 Watt

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels PSI Imprimante

PSI

PSI PR9 Manuel utilisateur

PSI

PSI PP 4050XP Manuel utilisateur

PSI

PSI PP 3034 Manuel utilisateur

PSI

PSI PP 405 Manuel utilisateur

PSI

PSI P 405 Manuel utilisateur

PSI

PSI PP204 Manuel utilisateur

PSI

PSI PP 2024 Manuel utilisateur

Manuels Imprimante populaires d'autres marques

Lexmark

Lexmark 1400 Series Manuel

Canon

Canon i70 Series Manuel utilisateur

Evolis

Evolis Elypso Manuel utilisateur

Kyocera

Kyocera FS-9530DN Manuel utilisateur

Canon

Canon LASER SHOT LBP-1210 Manuel utilisateur

Samsung

Samsung BIXOLON SRP-350plusF Manuel utilisateur

Canon

Canon PIXMA PRO-1 Series Manuel utilisateur

Canon

Canon PIXMA G3560 Guide de configuration

Dell

Dell Color Laser Printer 2130cn Manuel utilisateur

Tektronix

Tektronix Phaser 840 Manuel utilisateur

Epson

Epson ET-7750 Mode d'emploi

Canon

Canon CLBR 460ps Manuel utilisateur

Eltron

Eltron P210 Guide Manuel utilisateur

Ricoh

Ricoh MD-P1 Manuel utilisateur

Epson

Epson SC-F7100 series Manuel utilisateur

Epson

Epson Stylus C40UX Manuel utilisateur

Canon

Canon imagePASS-A2 Manuel utilisateur

Canon

Canon S820D Manuel utilisateur