PSC QuickScan QS2500 Manuel d'installation et d'exploitation

QuickScan® QS2500

Handheld Bar Code Scanner

Product Reference Guide

QS2500

PSC Inc

959 Terry Street

Eugene, Oregon 97402

Telephone: (541) 683-5700

Fax: (541) 345-7140

tion or the procedures described therein may be reproduced or transmitted in any form or by any means without

prior written permission of PSC Inc. or its wholly owned subsidiaries ("PSC"). Owners of PSC products are hereby

granted a non-exclusive, revocable license to reproduce and transmit this documentation for the purchaser's own

internal business purposes. Purchaser shall not remove or alter any proprietary notices, including copyright

notices, contained in this documentation and shall ensure that all notices appear on any reproductions of the docu-

mentation.

Should future revisions of this manual be published, you can acquire printed versions by contacting PSC Customer

Administration. Electronic versions will either be downloadable from the PSC web site (www.pscnet.com) or pro-

vided on appropriate media. If you visit our web site and would like to make comments or suggestions about this or

other PSC publications, please let us know via the “Contact PSC” page.

Disclaimer

Reasonable measures have been taken to ensure that the information included in this manual is complete and

accurate. However, PSC reserves the right to change any specification at any time without prior notice.

PSC is a registered trademark of PSC Inc. The PSC logo is a trademark of PSC. All other trademarks and trade

names referred to herein are property of their respective owners.

Patents

Manufactured under License from Intermec IP Corp. and covered by one or more of

the following United States patents:

3,991,299 • 4,282,425 • 4,570,057 • 4,766,300 • 4,877,949 • 4,894,523 • 4,970,379 •

5,019,699 • 5,021,642 • 5,038,024 • 5,081,343 • 5,095,197 • 5,144,119 • 5,144,121 •

5,182,441 • 5,187,355 • 5,187,356 • 5,216,233 • 5,218,191 • 5,233,172 • 5,258,606 •

5,288,985 • 5,308,966 • 5,414,251 • 5,541,419 • 5,550,364 • 5,659,431 • 5,684,290 •

5,764,798 • 5,777,310 • 5,786,583 • 5,798,509 • 5,811,777 • 5,818,027 • 5,837,987 •

5,841,121 • 5,854,478 • 5,902,987 • 5,936,224 • 5,987,192 • 6,012,640 • 6,016,960 •

6,018,597 • 6,039,252 • 6,064,763 • 6,097,839 • 6,128,414

Product Reference Guide i

Installation ......................................................................................... 1

Keyboard Wedge .........................................................................................1

Wand Emulation .........................................................................................1

RS-232 ...................................................................................................... 1

USB ..........................................................................................................1

Programming the QS2500 ..................................................................... 2

Resetting the QS2500 ..................................................................................3

Interfaces ..................................................................................................3

Keyboard Wedge ...................................................................................3

Wand Emulation ....................................................................................6

RS-232 ................................................................................................7

Advanced Feature ..................................................................................8

Scan ....................................................................................................... 10

Beep/Tone/LED Settings ............................................................................ 13

Label Editing (includes Prefix/Suffix) ............................................................ 15

Symbology Settings ............................................................................20

UPC-A ..................................................................................................... 20

UPC-E ..................................................................................................... 22

EAN-13 .................................................................................................... 24

EAN-8 ..................................................................................................... 25

Code 39 ................................................................................................... 27

Interleaved 2 of 5 ..................................................................................... 30

Industrial 2 of 5 ........................................................................................ 31

Matrix 2 of 5 ............................................................................................ 32

Codabar ................................................................................................... 34

Code 128 ................................................................................................. 36

Code 93 ................................................................................................... 38

Code 11 ................................................................................................... 40

MSI/Plessey ............................................................................................. 41

UK/Plessey ............................................................................................... 43

Telepen ................................................................................................... 44

Standard 2 of 5 ........................................................................................ 46

Code 16K ................................................................................................. 47

PDF417 ................................................................................................... 48

Italian PharmaCode ................................................................................... 49

RSS Expanded .......................................................................................... 50

RSS Limited ............................................................................................. 51

RSS-14 .................................................................................................... 52

Appendix - Default Settings ..................................................................53

Appendix B - Bar Code Samples ............................................................55

Appendix C - ASCII Codes ....................................................................58

Appendix D - Parameter Setting List ......................................................60

Appendix E - Alphanumeric Characters ..................................................61

ii QS2500

Product Reference Guide 1

Installation

Complete the following steps for the appropriate interface.

Keyboard Wedge

1. Turn off the terminal or computer.

2. Disconnect the keyboard cable from the back of the terminal or

computer.

3. Connect the QS2500 to the terminal or computer using the

appropriate interface cable.

4. Turn the terminal or computer back on.

Wand Emulation

1. Turn off the terminal or computer.

2. Connect the appropriate interface cable to the terminal or com-

puter.

3. Turn the terminal or computer on.

RS-232

1. Turn off the terminal or computer.

2. Connect the interface cable and the external power supply (DC

adapter) shipped with your QS2500. If a power-off-terminal

(POT) cable is shipped, no external power supply is required.

3. Secure the connector to the serial port on the back of the com-

puter or terminal by tightening the two screws.

4. If required, plug the power supply into the power source.

5. Turn the terminal or computer on.

USB

1. Plug the USB cable into the terminal or computer.

NOTE

If the QS2500 does not operate, turn off the terminal or computer

immediately and check all connections. If necessary, go through the

above steps again.

2QS2500

Programming the QS2500

To program the QS2500, you must scan a series of programming bar

codes in the correct order. The inside back cover of this manual con-

tains a table of alphanumeric bar codes needed to program the various

options.

To program each option:

1. Scan the Start Program bar code above the list of options (see

the table below).

2. Enter the option mode by scanning the Option bar code.

3. Find the alphanumeric entry for the option setting you want,

and scan the alphanumeric characters located in Appendix E.

4. Scan the Finish bar code in Appendix E.

5. Scan the Exit bar code.

Table 1. Interface Options

Start Program

Option Bar Code Option Alphanumeric Entry

Keyboard Wedge 00

RS-232 01

Wand Emulation 02

USB 03

Exit

NOTES

- An asterisk (*) in the table indicates the default setting.

- A software utility, Configurator Express, is also available for programming

and configuring the QS2500. Refer to the Readme file on the QS2500 prod-

uct CD for additional information.

Product Reference Guide 3

Resetting the QS2500

To return all QS2500 option settings to the factory defaults, scan the fol-

lowing three bar codes, in the order shown:

Interfaces

The QS2500 supports four interfaces, Keyboard Wedge, RS-232, Wand

Emulation and USB. The correct interface cable is included for the scan-

ner interface type you ordered.

Keyboard Wedge

As a keyboard interface, the QS2500 supports most popular PCs and

IBM terminals. The installation of the wedge is a fairly simple process

that doesn’t require any changes of software or hardware.

Keyboard Type:

Select the keyboard type connector for your host com-

puter.

Keyboard Layout:

The Keyboard Layout option supports many lan-

guages. For details about keyboard languages, please refer to your

operating system manual.

Keyboard Speed:

You can change the output speed of the QS2500 to

match that of the host computer. Generally, set 00 or 01 for high

speed. If output characters of bar codes get lost, you may need to set a

slower speed.

Start Program

Default Value

Initialization

4QS2500

Option Bar Code Option Alphanumeric

Entry

Keyboard Type

IBM AT, PS/2 00*

Reserved 01 - 06

Keyboard Layout

USA 00*

Belgium 01

Danish 02

France 03

Germany 04

Italian 05

Portuguese 06

Spanish 07

Swedish 08

Switzerland 09

UK 10

Latin American 11

Japan 12

Keyboard Speed

0–8

(0 = high clock rate;

8 = low clock rate)

00–08

01*

Start Program

Exi

Product Reference Guide 5

Function Key:

When this option is enabled, the QS2500 outputs bar code

ASCII values from 01hex to 1Fhex as function-key presses in your appli-

cation. See the table of ASCII codes In Appendix C on page 58.

Numeric Key:

If your application accepts only keypad numeric code, use

setting 01 to make the QS2500 output code as numeric-keypad presses

when it reads digits. If you use setting 02, Caps Lock and output will

be independent.

Caps Lock:

By selecting Caps Lock or No Caps Lock, the QS2500 can get

Caps Lock status.

Power-On Simulation:

All PCs check the keyboard status during the

power-on selftest. It is recommended that you enable this function if

you are working without a keyboard installation. It simulates keyboard

timing and passes the keyboard status to the PC during power-on.

Intercharacter Delay:

This delay is inserted after each data character

transmitted. If the transmission speed is too high, the system may not

be able to receive all characters. You may need to adjust the delay to

make the system work properly.

Block Transmission Delay:

This is a delay timer between bar code data

outputs. The feature is used to transfer continually with shorter bar

code data or multifield scanning.

Option Bar Code Option Alphanumeric

Entry

Function Key

Disable 00*

Enable 01

Numeric Key

Alphabetic key 00*

Numeric keypad

only 01

Alt+Keypad 02

Caps Lock

Caps lock 00

No caps lock 01*

Start Program

6QS2500

Wand Emulation

Power-On Simulation

Disable 00*

Enable 01

Intercharacter Delay

0–99 (msec.) 00–99

02*

Block Transmission Delay

0–99 (10 msec.) 00–99

10*

Option Bar Code Option Alphanumeric

Entry

Interface selection

Keyboard Wedge 00*

Wand Emulation 01

Bar/Space Polarity

Bar high/Space low 00*

Bar low/Space high 01

Idle Polarity

Idle low 00*

Idle high 01

Option Bar Code Option Alphanumeric

Entry

Exi

Start Program

Autres manuels pour QuickScan QS2500

Table des matières

Autres manuels PSC Lecteur de codes-barres

PSC

PSC QuickScan QS2500 Manuel d'installation et d'exploitation

PSC

PSC QuickScan 6000 Mode d'emploi

PSC

PSC magellan 8100 Manuel utilisateur

PSC

PSC HD Manuel utilisateur

PSC

PSC Magellan 2200VS omega Manuel utilisateur

PSC

PSC LM520 Manuel du propriétaire

PSC

PSC Magellan 2200VS omega Manuel utilisateur

PSC

PSC vs1200 Manuel utilisateur

PSC

PSC PSRF-1000 Guide de l'utilisateur

PSC

PSC Falcon PT40 Manuel d'installation et d'exploitation

PSC

PSC QuickScan QS2500 Manuel utilisateur

PSC

PSC PowerScan RF Manuel utilisateur

PSC

PSC PowerScan Handheld Mode d'emploi

PSC

PSC PowerScan Mode d'emploi

PSC

PSC LazerData 12000 Series Manuel utilisateur

PSC

PSC FALCON 315 Manuel utilisateur

PSC

PSC QRG QuickScan QS3500 Manuel utilisateur

PSC

PSC QS200 Manuel du propriétaire

PSC

PSC PowerScan RF Guide de l'utilisateur

PSC

PSC Duet Manuel

PSC

PSC LazerData Series 9000E Manuel utilisateur

PSC

PSC Falcon 4410 Instructions d'installation et d'utilisation

PSC

PSC Magellan 8500 Manuel utilisateur

PSC

PSC PowerScanTM RF Manuel utilisateur

Manuels Lecteur de codes-barres populaires d'autres marques

POSMicro

POSMicro Datalogic PowerScan D7100 Manuel utilisateur

Marson

Marson MT780 Guide de configuration rapide

NCR

NCR RealPOS Manuel utilisateur

Motorola

Motorola SE3300 Guide de configuration rapide

Element

Element P130BT Manuel utilisateur

Motorola

Motorola Symbol LS3008 Manuel d'installation et d'exploitation

Meec tools

Meec tools OBD-II / VAG Manuel utilisateur

SICK

SICK CLP 100 Manuel utilisateur

Royal Tag SA

Royal Tag SA I-Read Manuel utilisateur

Welch Allyn

Welch Allyn IMAGETEAM 3800 Manuel utilisateur

Meteor

Meteor 8310 Manuel utilisateur

Denso

Denso BHT-500B Manuel utilisateur

Datalogic

Datalogic Heron HD3130 Manuel utilisateur

Motorola

Motorola MP6000 Instructions de montage

Newland

Newland NLS-HR15-BT Manuel utilisateur

ARTDEV

ARTDEV AS-1310 Manuel utilisateur

Aopos

Aopos AS290 Manuel utilisateur

ENS

ENS 367-5455 Manuel utilisateur