
Installation
Please confirm that you have all of the parts before connecting AC/DC adapter and Pump
UNKAI1000 SKimmer installation
4
1.
Please fix Body and Pump Units with Body fis screw
on that moment,Please handle the pump cors gently.Never
pull strongly
2.
Please set Silencer on body neck
3.
Please set Inlet water control bar and Venturi control
bar (No need care each side)
4.
Please set Suction cup on body
5.
Please introduce Skimmer into the sump
6
.
Please insert AC/DC adapter pin plug into DC pump and
Controller.
7. AC/DC adapter insert to plug
8.
Please set Controller level around C10 first.Then
please
controle till become stable babble with pump level and 2
kinds of bar and gate bar
Suction cup
Silencer
Pump units UNKAI1000 body
Inlet water control bar
Venturi control bar
Body fix screw
fig-2 UNKAI1000 Skimmer installation
Gate bar control
1.Controller level ( C01 ~ C20 )
2.Inlet water control bar( OPEN become strong )
3.Venturi control bar( OPEN become strong )
4.Gate bar
Mesh Needle Maintenance
※ UNKAI1000 Skimmer is using Mesh Needle.So there are possibility some obstacle clogged
inside Mesh needle.Please check babble condition sometimes . Then, if babble condition
will be changed,Possibility there are some obstacle inside Mesh needle, please wash with
soft
material tool.
- Refernce -
For small obstacle --- like tweezers or soft needle
Moss --- Thin Chlorine water
Ca/Mg ---Thin Acid water
Attention : Never touch Needle when you will take out from the pump