Safety
Read and follow these instructions.
Charge with recommended chargers only.
Use with professional video cameras or other video equipment.
Due to IATA lithium-ion battery air transport regulations, all batteries packed by themselves
should be discharged to approximate 30% of the rated design capacity. Please do charge the
battery before using.
Handling
Do not expose the battery to heat and never throw it in fire or use flammable or
combustible materials and solvents around batteries or chargers. Do not use outside of
specified temperature ranges (above 60℃/140℉).
Do not immerse in water. Keep the battery dry and away from excessively dry or humid
environments.
Do not attempt to open the outer case or break apart the battery. Do not pierce or drill into
the outer case of the battery.
Do not subject the battery to extreme physical impact or pressure, or place any object
across the terminals that could cause it to short.
Do not attempt to use the battery when is damaged.
Do not use the battery in a corrosive environment. Damages occur from salt water, seawater,
acid, alkali, corrosive gas, etc.
Electrical Connection
Do not short the contact pins with any metal object. Do not carry or store the battery with
metal equipment.
Do not use, store or place the battery in an electrostatic area.
Always keep the terminals (of the battery and the charger) clean.
Do not solder on the contact pins directly.
Wrong connection between the equipment and the P-Tap will cause short circuit of the
equipment. Please pay extra attention to P-Tap polarities.
Using
Please note that the outer case will become hot when the battery is discharged in high
temperatures or with high loads.
Do not use if the battery displays unusual characteristics (odd odor, discoloration, etc.) when
in use, during charge or in storage.
