PROWLER WSPROBD4191-1 Manuel utilisateur
TILE CUTTER
WSPROBD4191-1
4.2A
/
4.5inch
Made in China 2019
CONTENTS
Introduction
Technical specifications
Nominal input voltage................................120 V~, 60 Hz
Power consumption.................................. 4.2A
Speed....................................................... 5400RPM
Weight ..................................................... approx. 3.6 kg
Depth of cut 90°.........................................max. 25 mm
Depth of cut 45°.........................................max. 16 mm
Sound pressure level (LpA)........................94 dB(A); KpA=3 dB
Sound power level (LwA) measured..........104 dB(A); KwA=3 dB
guaranteed.................................................107 dB(A)
Cutting Wheels Outer diameter.................Ø 115 mm
Bore hole....................................................Ø 22,2 mm
Noise and vibration values have been determined according to the standards and
regulations mentioned in the declaration of conformity.
Technical and optical changes may be undertaken in the course of further development
without notice. All dimensions, references and information in this instruction manual are
therefore not guaranteed. Legal claims made on the basis of the instruction manual can
therefore not be considered as valid.
Summary
Assembly
•
•
•
•
Operation
•Switching on and off
Connect the equipment to the mains.
Test run:
Ce manuel convient aux modèles suivants
2
Table des matières
