Provision ISR PR-DVR-C10 Manuel utilisateur

PR-DVR-C10

Quick Installation Guide

CONTENTS

5. Recorder Installation

1. About this User Manual Page 1

Page 1

Page 2

Page 3-4

Page 5-7

Page 8

Page 9

Page 10-12

Page 13-14

Page 15

Page 16

Page 17

4. Camera Controls Introduction

3. Package Contains

8. Photo Mode Operation

9. Playback Mode Operation

10. Menu Setting Operation

11. Special Features

12. Main Screen

13. Menu Setting

7. Video Recording Mode Operation

6. Initial Settings

2. Warnings!

14. Product Specifications

15. Troubleshooting

- For your own safety, please do not install or operate while driving.

- Before first time use, we recommend formatting the memory card.

- Built-in battery working time is around 30 minutes; please connect to a power source for daily use.

- Do not attempt to remove the camera mount forcefully.

- Do not dismantle or open the camera.

- Do not put any weight on the camera as it may damage the screen.

- If the camera is not responding, please try to reset it by pressing the reset button.

- Please keep the camera lens clean.

This user manual is specially designed to detail the camera’s functions and features.

- Please read this manual before using the camera to ensure safe and proper use.

- Descriptions are based on the camera’s factory default settings.

- PROVISION-ISR continuously strives to improve its products. Due to software upgrading, some contents

in this user manual may be different from your product.

About this User Manual

Warnings!

Package Contains

USB Cable

Dual Channel HD Car Dash CameraStrip Holder

Car Charger

Manual Book

Trim Removal Tool

PR-DVR-C10

Quick Installation Guide

Camera Controls Introduction

109

3 6 2 4 5 11211

8 7

IconNo. Name Operating Instructions

- Under Video mode, press to Stop/Start recording.

- Under Photo mode, press to capture a picture.

- Under Playback mode, press to Play/Stop video files.

Press to switch among Video mode, Photo mode and Playback mode.

(Notice: You must stop video recording before mode switching)

Long press to Turn On/Off the camera / Short press to go to screen saver.

- Under Menu, use the Up/Down key to navigate.

- Under Playback mode, press to browse playback files.

- Under Playback mode, press to control volume.

- Press for system setting

- Under Video recording mode, press to lock current file.

TF memory card slot

- Connect to the PC for data transmission

- Connect to the car charger for power supply.

Reset the device.

Microphone.

Hidden IR LED

MIC

USB

1OK

MODE

ON/OFF

UP/DOWN

Reset

Microphone

TF card slot

USB port

4/5

IR LED

11/12

Recorder Installation

1. Before starting video recording, please insert a Micro SD card

(not included) into the slot until it locks in place.

Please pay attention:

- The micro SD card (TF card) can be up to 32GB (class 10 and

above is recommended)

- The micro SD card needs to be formatted. You can format it using

the camera (explained in step 5)

2. Mount bracket and camera to car's original rearview mirror.

Step 1 Step 2 Step 3

3. Lay the "car charger" cable provided in the box between the camera to car’s cigarette lighter socket to car

(see suggested diagram).

4. Plug-in “Mini USB” side to camera and Car Charger side to the car's cigarette lighter socket.

Mini USB side Car Charger side

5. Start the engine, the dash camera will automatically turn on, Go to systems settings find the "Format"

Option. Press "OK" to format the TF card.

B. Press ◄/► button to select

the “Format” option, then press

“OK” button to confirm.

C. Press ◄/► button to select

“OK” option, then press “OK”

button to format it.

When the car engine starts, the camera will automatically turn on and begin video recording. When the

car’s engine is turned off, the camera will automatically turn off.

6. Ready to go.

A. Press “MENU” button

to enter the SETUP list.

22:51

Park mode

G-sensor

Date/Time

Language

Date Stamp

Format

English

22:51

Park mode

G-sensor

Date/Time

Language

Date Stamp

Format

English

Tips

OK Cancel

Format the TF card

22:51

Resolution

Photo quality

Loop recording

Motion Detection

White Balance

Exposure

FHD

2 Minutes

Auto

D. Press “MENU” button to exit, press “OK” button to start recording.

Set the Date and Time:

Initial Settings

Video Recording Mode Operation

1. When the car engine starts, the camera will automatically turn on and start video recording, when the

car’s engine is turned off, the camera will automatically turn off.

2. Press “OK” to Stop/Start recording.

Helpful Tips:

- You can set the recorder video file duration to 1/3/5 minutes from setting menu.

- As a default, when the camera “loop recording” set “on”, it means that once the memory card is full, the

camera will start cycle recording and overwrite the old file from old to new (FIFO).

1. Press the “OK” button to stop the video recording.

2. Then press the “Menu” button, by pressing to select the “Date / Time” option, then press the “OK”

button to enter.

3. Press the buttons to adjust the values, press the “OK” button to switch between the fields. Press

“Menu” to exit and confirm.

Table des matières

Manuels Caméra embarquée populaires d'autres marques

Cansonic

Cansonic UltraDuo Z2 Manuel utilisateur

Gazer

Gazer F720 Manuel utilisateur

HP f500g Manuel utilisateur

Xblitz

Xblitz TANGO 4K Manuel utilisateur

Rexing

Rexing M1 Manuel utilisateur

Maka Technologies

Maka Technologies Marbella MXPro Manuel utilisateur

NESA

NESA NRC-80DLM Instructions d'installation et d'utilisation

Kaiser Baas

Kaiser Baas R20 Manuel utilisateur

Boyo

Boyo VTM43TC Manuel utilisateur

Minolta

Minolta MNCD37 Manuel utilisateur

Thinkware

Thinkware FA10 Manuel utilisateur

Momento

Momento MD-5200 Manuel utilisateur

BlackVue

BlackVue DR590X-1CH Manuel utilisateur

HP F300 Manuel utilisateur

CammSys

CammSys BlackSys BH-300 Manuel utilisateur

Snooper

Snooper DVR-2HD Manuel utilisateur

Lukas

Lukas Q900 Manuel utilisateur

RVS

RVS 450C Manuel utilisateur