Do
not drop the thermometer. It
is
neither
shock-proof nor impact-resistant.
Do
not
bend or open the device (except the
battery compartment).
Do
not
clean with thinners, petrol or benzene.
Only clean the thermometer with water or
disinfectant.
Do
not
immerse the thermometer under water
deeper than 15cm for longer than 5 minutes.
The thermometer contains small parts (inclu-
ding a battery) which can be swallowed by
children.
For
this reason,
do
not
leave the ther-
mometer unattended in the hands
of
children.
Avoid bending the flexible tip by more than
45
degrees.
If
the ambient temperature
is
over 35°C/95°F,
dip
the thermometer
tip
in cold water for
10
seconds prior
to
measuring the temperature.
Persistent fever, in particular in children,
has
to
be treated by a doctor. Pl
ease
get in touch
with
your doctor!
Battery replacement
The battery
is
empty
and needs replacing when the
battery symbol D appears on the right
of
the
LCD
.
Re-
move the philips screw from the back
of
the thermo-
meter. Pull
off
the battery cover. Gently slide
out
the
ci
rcu it board
with
the battery chamber approximately
up
to
1 cm and replace the battery by one
of
the
same
type (preferably non-mercury)
with
the"+"
polarity
fa
cing up. After replacing the battery, reposition the
circuit board, the battery cover and the philips screw.
To
protect the environment, please
do
not
dispose
of
batteries
as
normal waste. Instead, please hand them
in at a collection
point
or
municipal recyclable material
centre
as
special waste.
Technical data
Type: maximum thermometer
Measurement range:
(32.00oC~43
.00°C)l(89.60
°F
~109.40°F)
Meas
urement accuracy:
+/-0. 1
°C/0.2°F
(35.5°C
~42.0°C/
95
.
9°F~
107
.
6°F)
at
ambi-
ent temperature
18°C
~28°C(64.4°F~82.4°F).
+I-0.2°CI0.4°F
(32.0°C
~35.5°CIB9.6°F~95.9°F)
at
other
ambient temperatures.
Storage/transportation conditions:
(-20~55°C),
15%~95%RH
Ambient operating conditions: (5~35
°C),
15%~95%RH
Min
Scale:
0.
7°C
/0.
7°F
Battery type: Alkaline manganese battery,
type
LR41,
1.SV.
Weight: Approx.
12g
Ex
planation
of
symbols
Battery
is
empty
The
battery in this product complies with
the requirements stated in European
Directives 2006/66/EEC.
Lo°C
or
Lo°F
Temperature
is
under
32
°C
or
89
.6
°F
Hi°C
or
Hi°F
Temperature
is
over
43
°C
or 109.4
°F
Type
BF
equipment
Consumed electronic products must
::f(
not
be mixed
with
conventional
-domestic waste.
Tak
e thi s product to
the appropriate wasted collection
point
s for corr
ec
t
handling and recycling.
Legal requirements and guidelines
This product complies
with
the European Directive for
Medical Devices 93/42/EEC and carries the
CE
mark.
The device also complies
with
the specifications
of
the
European Standard for Clinical Thermometers
Part
3:
Performance
of
compact electrical thermometers
(non-predictive and predictive)
with
maximum device.
The
CE
marking confirms
that
this
is
a medical device
with
a measuring function
as
defined by the Medical
Devices Act, which
has
undergone a conformity
assessment procedure. Notified Body 0197 confirms
that this product fulfils all the appropriate statutory
regulations.
This thermometer conforms
to
all
of
the
requirements
established in
ASTM
Standard E 1112. Full responsibili-
ty
for conformance
of
this
product
to
the
specification
is
assumed by iProven, 9450
SW
Gemini Dr #48879,
Beaverton
OR,
97008-71
OS
.
Calibration check
This thermometer
is
initially calibrated at the time
of
manufacture.
If
this thermometer
is
used according to
the operation instruction, periodic re-adjustment
is
not
required. The calibration check should be carried
out
immediately,
if
there
are
indications
that
the
product does
not
maintain the defined error limits
or
if
the calibration could have been affected by
an
external factor or by any
other
means. For callibration
please observe any national statutory or administra-
tive regulations. The calibration check can be carried
out
by any competent authority
or
by
authorised
service providers. Test instructions for a calibration
check
can
be provided
to
the relevant authorities and
authorized service providers on request.
Warranty
For
1 year extended warranty please register your
product at warranty.iproven.com
l~
Proven
l
Manufactured for: iProven
USA
LL
C
Address: 9450
SW
Gemini Dr #48879
Beaverton -
OR
97008-71
OS
Vers
ion: 20151222 DT-Rl
221
A and B
