Prorack K412 Manuel utilisateur
K412
Fitting Kit
EN Fitting Instructions for Basic Carrier
x 4 x 2 x 2 x 4
x 4 x 1
Revision No: 7D 1
Fitting Kit K412
MAX kgs (lbs)
W/P WHD
Citroen
C4 Grand Picasso, 5dr MPV 07-13 ZA 75 kgs (165 lbs) 75 kgs (165 lbs)
C4 Picasso, 5dr MPV 07-+ ZA 75 kgs (165 lbs) 75 kgs (165 lbs)
C4 Picasso, 5dr MPV 07-12 EU 75 kgs (165 lbs) 75 kgs (165 lbs)
C4, 3dr Hatch 04-10 EU 75 kgs (165 lbs) 75 kgs (165 lbs)
C4, 3dr Hatch 06-09 CN 75 kgs (165 lbs) 75 kgs (165 lbs)
C4, 5dr Hatch 04-10 AU 75 kgs (165 lbs) 75 kgs (165 lbs)
C4, 5dr Hatch 04-10 EU 75 kgs (165 lbs) 75 kgs (165 lbs)
C4, 5dr Hatch 04-10 NZ 75 kgs (165 lbs) 75 kgs (165 lbs)
C4, 5dr Hatch 05-10 ZA 75 kgs (165 lbs) 75 kgs (165 lbs)
C4, 5dr Hatch 06-09 CN 75 kgs (165 lbs) 75 kgs (165 lbs)
Ford
Focus, 3dr Hatch 08-11 NZ 75 kgs (165 lbs) 75 kgs (165 lbs)
Focus, 3dr Hatch 08-11 AU 75 kgs (165 lbs) 75 kgs (165 lbs)
Focus, 3dr Hatch 08-11 EU 75 kgs (165 lbs) 75 kgs (165 lbs)
Focus, 3dr Hatch 08-11 ZA 75 kgs (165 lbs) 75 kgs (165 lbs)
2
Fitting Kit K412
X
A B C 1 2 3
C4 Grand Picasso, 5dr MPV 07-13 (ZA) 240mm 470mm - 838mm 881mm -
9 7/16ths" 18 1/2ths" - 33" 34 11/16ths" -
C4 Picasso, 5dr MPV 07-+ (ZA) -240mm 470mm - 938mm 881mm -
-9 -7/16ths" 18 1/2ths" - 36 15/16ths" 34 11/16ths" -
C4 Picasso, 5dr MPV 07-12 (EU) -240mm 470mm - 938mm 881mm -
-9 -7/16ths" 18 1/2ths" - 36 15/16ths" 34 11/16ths" -
C4, 3dr Hatch 04-10 (EU) -300mm 400mm - 824mm 756mm -
-11 -13/16ths" 15 3/4ths" - 32 7/16ths" 29 3/4ths" -
C4, 3dr Hatch 06-09 (CN) -300mm 400mm - 824mm 756mm -
-11 -13/16ths" 15 3/4ths" - 32 7/16ths" 29 3/4ths" -
C4, 5dr Hatch 04-10 (AU) -300mm 400mm - 824mm 756mm -
-11 -13/16ths" 15 3/4ths" - 32 7/16ths" 29 3/4ths" -
C4, 5dr Hatch 04-10 (EU) -300mm 400mm - 824mm 756mm -
-11 -13/16ths" 15 3/4ths" - 32 7/16ths" 29 3/4ths" -
C4, 5dr Hatch 04-10 (NZ) -300mm 400mm - 824mm 756mm -
-11 -13/16ths" 15 3/4ths" - 32 7/16ths" 29 3/4ths" -
C4, 5dr Hatch 05-10 (ZA) -300mm 400mm - 824mm 756mm -
-11 -13/16ths" 15 3/4ths" - 32 7/16ths" 29 3/4ths" -
C4, 5dr Hatch 06-09 (CN) -300mm 400mm - 824mm 756mm -
-11 -13/16ths" 15 3/4ths" - 32 7/16ths" 29 3/4ths" -
Focus, 3dr Hatch 08-11 (NZ) -410mm 280mm - 875mm 850mm -
-16 -1/8ths" 11" - 34 7/16ths" 33 7/16ths" -
Focus, 3dr Hatch 08-11 (AU) -410mm 280mm - 875mm 850mm -
-16 -1/8ths" 11" - 34 7/16ths" 33 7/16ths" -
Focus, 3dr Hatch 08-11 (EU) -410mm 280mm - 875mm 850mm -
-16 -1/8ths" 11" - 34 7/16ths" 33 7/16ths" -
Focus, 3dr Hatch 08-11 (ZA) -410mm 280mm - 875mm 850mm -
-16 -1/8ths" 11" - 34 7/16ths" 33 7/16ths" -
3
Fitting Kit EN
K412
First Time Installation
●Remove parts from inside the package and
check. Contact your dealer if any parts are
missing or damaged.
●This kit fits type A, B, C and D.
●These instructions show type A crossbar
fitted. They also apply to type B, C and D.
●Use keys to remove covers.
4
Fitting Kit EN
K412
●Use hex screwdriver to reverse adjusting
screw 10 turns.
●Press adjusting screw and pull crossbar
legs out. Refer to the crossbar instructions
for crossbar adjustment method.
●Ensure each end of the crossbar is
adjusted equally.
●Adjust crossbar in or out to suit vehicle.
Refer to the crossbar instructions for
crossbar adjustment.
●Attaches to factory-fitted mounting points
●Please check the front of this manual for
information relating specifically to your
vehicle.
5
Fitting Kit EN
K412
●Tighten adjusting screw to 5 Nm (3.7 ft lb)
hand tight.
●Remove plastic clamp block by gripping bar
leg with fingers and push firmly with
thumbs until clamp block drops out behind
leg.
●Select plastic internal block (from fitting kit)
and insert into foot.
●Repeat for all legs.
6
Fitting Kit EN
K412
Fitment
●Open or remove fixed-point covers.
●Select grubscrews and screw into the
vehicle's fixed points.
●Do not over tighten.
●Repeat for all four positions.
●Refer to the underside of the pad for the
part number.
7
Fitting Kit EN
K412
●Letters refer to the pad part numbers and
position.
●Pad Part Number:
A = 11-04-224
B = 11-04-225
●Ensure the fixed-point covers sit vertically
in the recess in the pads.
●NOTE: Citroen C4 Picasso only
●This product has two different bar
lengths.The longer bar should be used on
the front of the vehicle and the shorter bar
used on the rear.
8
Fitting Kit EN
K412
●Place crossbars on pads ensuring the pads
fit into the holes underneath the foot and
the grubscrew passes through the hole in
the foot.
●Repeat for all four positions.
●Tighten the plastic knob. The side with the
nut showing should be facing up.
●Ensure the plastic knob is in the position
shown when fully tightened.
●Repeat for all legs.
9
Fitting Kit EN
K412
●Check crossbar is securely attached to the
vehicle.
●Use keys to fit and lock covers
CAUTION: Recheck all fasteners immediately after
a load is applied to the crossbars.
Regularly check screws are tight.
10
Table des matières
Autres manuels Prorack Accessoires automobiles
Prorack
Prorack K419 Manuel utilisateur
Prorack
Prorack K010 Manuel utilisateur
Prorack
Prorack K853 Manuel d'utilisation et d'installation
Prorack
Prorack K306 Manuel utilisateur
Prorack
Prorack K762 Manuel utilisateur
Prorack
Prorack K677 Manuel d'utilisation et d'installation
Prorack
Prorack K708 Manuel utilisateur
Prorack
Prorack K403 Manuel d'utilisation et d'installation
Prorack
Prorack K004 Manuel utilisateur
Prorack
Prorack K312 Manuel utilisateur
Prorack
Prorack K838 Manuel utilisateur
Prorack
Prorack K843 Manuel utilisateur
Prorack
Prorack K748 Manuel utilisateur
Prorack
Prorack K612 Manuel utilisateur
Prorack
Prorack K671 Manuel utilisateur
Prorack
Prorack P15 Manuel utilisateur
Prorack
Prorack K1062 Manuel utilisateur
Prorack
Prorack K027 Manuel d'utilisation et d'installation
Prorack
Prorack K530 Manuel utilisateur
Prorack
Prorack K866 Manuel utilisateur
