Propress PRO580 Manuel utilisateur
PRO580 STEAMER
USER MANUAL
Operating & Safety Instructions
Before using your Propress steamer, please read this manual
thoroughly and retain it for future reference.
1. Operating Safety 2
2. Unpacking Your Propress 4
3. Assembling Your Propress Steamer
and Preparing for Use 5
4. Operating Instructions 8
4.1 Filling Steamer with Water 8
4.2 Switching On 9
4.3 Using Your Steamer 10
4.4 Standby Setting 10
4.5 Safety Filler Cap 10
5. Tips on Use 12
5.1 Steaming Clothing 12
5.2 Full Garment 13
5.3 Wedding Dresses 13
5.4 Curtains & Soft Furnishings 14
5.5 Fabric Limitations 14
6. Care and Maintenance 15
6.2 Cleaning Your Steamer 15
6.3 Descaling Your Steamer 16
7. Storing your Propress When Not In Use 17
8. Propress Troubleshooting Matrix 18
9. Guarantee 21
CONTENTS
1
Working safely with your Propress
steamer is only possible when these
operating and safety instructions are
read completely and the contents
herein are understood and followed.
PRO580 USER MANUAL
OPERATING & SAFETY INSTRUCTIONS
perating & Safety Instructions
disorder increases the risk of an accident.
The appliance is not to be used by
persons (including children) with reduced
physical, sensory or mental capabilities,
or lack of experience and knowledge
unless they have been given supervised
instruction.
Under no circumstances should the
steamer be left unattended when in
operation. When not in use disconnect
the power supply.
Keep children away from the steamer.
Children should be supervised to ensure
they do not play with the appliance.
Regularly check power cable and plug
when steamer is disconnected from the
power supply.
1. OPERATING SAFETY
Do not use the steamer if either power
cable or plug are damaged; contact an
approved service agent for repair.
rated extension cables can be dangerous
Regularly check hose for damage or
distortion.
when steamer contains hot water.
Do not unplug the steamer by pulling the
electric cord, always switch off at the
of socket.
and wait for steamer to cool down before
spillage before connecting steamer
steaming or heating up.
Once a week the steamer should
be cleaned. See section 6. Care and
Maintenance
clothing being worn.
Persons using the steamer must be
authorised to do so and trained in safe
working procedures. Where necessary,
protective clothing should be worn.
Propress steamers are
electrical steam generating
appliances, therefore
components may get very hot
and could cause burns.
Propress steamers are designed for
vertical pressing of fabric and removal
in any way to alter their operation.
3
To ensure appliance safety use only
spare parts and accessories approved
by the manufacturer. Service should only
be carried out by the manufacturer or an
approved service agent.
release valve ball is always replaced
moving before switching steamer on.
system or smoke detector as the steam
may trigger an alarm.
MAX
4L
perating & Safety Instructions
In the box you will nd the following:
• Propress PRO580 Steamer
• Telescopic pole set and top hook
• Steam hose with aluminium nozzle and
protective cotton cover/bag
• 3 Castors
• Funnel
• Safe Operating Poster
If any of these parts are missing
or damaged, notify your supplier
immediately.
2. UNPACKING YOUR PROPRESS
Poster
5
Before assembling, t
the 3 press-on castors to
locating holes in chassis
base of steamer.
1. Gripping the telescopic
pole in both hands, twist
the internal/middle
pole section counter-
clockwise and extend
upwards by at least 10cm.
Twist clockwise to lock.
2. Gently lower telescopic
pole onto the base pole
which is attached to the
steamer.
3. Ensure telescopic pole
is pushed down over
the black plastic sleeve
and is resting on the top
bracket of the base pole.
3. ASSEMBLING YOUR PROPRESS
STEAMER AND PREPARING FOR USE
perating & Safety Instructions
4. Screw hook into top of
telescopic poles – DO
poles to suitable height
(twisting clockwise
to lock and counter-
clockwise to unlock)
so the hose can easily
be rested in the hook.
hose outlet coupling by
aligning the ears then
pushing and twisting the
hose end clockwise on
the coupling until it locks
in to position.
3. ASSEMBLING YOUR PROPRESS STEAMER
AND PREPARING FOR USE (CONTINUED)
7
7. Place steam nozzle into
hook on top of pole set.
Remove protective cotton
cover/bag from nozzle.
position when not in use.
Your Propress steamer is designed to be
used with clean tap water, no additives
in any form should be used as the use
of additives (except Propress Descaler)
will damage your steamer and void the
warranty.
Your steamer is an electrical
appliance and is designed for
indoor use only. It must be
used on level ground, uneven
surfaces can cause damage to
the heating element.
perating & Safety Instructions
4. OPERATING INSTRUCTIONS
4.1 Filling Steamer with Water
1. Remove the Filler Cap from the
steamer.
and pour in using funnel supplied.
4L
MAX
4L
Never remove ller cap
when in operation.
Use only tap water. The addition
of perfume or other agents will
seriously damage your steamer
and void the warranty.
Ret ller cap. Ensure ball
bearing within ller cap is
always free moving before
switching steamer on.
Do not overll. When
the steamer is full the
indicator oat will appear
in the sight glass.
If condensation is restricting the view of
remove cap by twisting anti-clockwise,
top of the sight glass, the steamer has
removing the hose and pour out of steam
outlet mopping up any spillage.
Autres manuels pour PRO580
2
Table des matières
Autres manuels Propress Appareils de cuisine
