Promate Pyram Manuel utilisateur

Table des matières

Autres manuels Promate Intervenants

Promate

Promate Harmony Manuel utilisateur

Promate

Promate Rustic Manuel utilisateur

Promate

Promate Snowy Manuel utilisateur

Promate

Promate TimeBase-2 Manuel utilisateur

Promate

Promate Safari Manuel utilisateur

Promate

Promate bikeRock Manuel utilisateur

Promate

Promate Mulotov Manuel utilisateur

Promate

Promate MW-1309 Manuel utilisateur

Promate

Promate Ape Manuel utilisateur

Promate

Promate Cyclone Manuel utilisateur

Promate

Promate Prime Manuel utilisateur

Promate

Promate Rustic-2 Manuel utilisateur

Promate

Promate bluRock2 Manuel utilisateur

Promate

Promate GROOVE Manuel utilisateur

Promate

Promate Globo-2 Manuel utilisateur

Promate

Promate streamBox-L Manuel utilisateur

Promate

Promate bluRock2 Manuel utilisateur

Promate

Promate Spire Manuel utilisateur

Promate

Promate LumiPlay Manuel utilisateur

Promate

Promate bikerMate Manuel utilisateur

Promate

Promate JOBAXL Manuel utilisateur

Promate

Promate JoyfulJazz Manuel utilisateur

Promate

Promate Hummer Manuel utilisateur

Promate

Promate Sense Manuel utilisateur

Manuels Intervenants populaires d'autres marques

argon audio

argon audio IE20 Manuel utilisateur

Denon

Denon SC-N7 Manuel utilisateur

Gemline

Gemline Ace 3952 Manuel utilisateur

Focal

Focal ON WALL 300 Mode d’emploi

HEADRUSH

HEADRUSH Maximus HRSP 5024 Manuel utilisateur

SoundLogic

SoundLogic BCCS-6/6395 Manuel utilisateur

Peavey

Peavey DTH 218 Manuel utilisateur

Avantree

Avantree Pluto Air Manuel utilisateur

Morel

Morel Integra Series INTEGRA OVATION 4 Manuel utilisateur

Oppo

Oppo SONICA Manuel utilisateur

Bose

Bose SoundLink Wireless Music System Manuel utilisateur

Rocksteady

Rocksteady Stadium Manuel utilisateur

Bowers & Wilkins

Bowers & Wilkins 4 Manuel utilisateur

Sonance

Sonance SONOS OUTDOOR Series Manuel utilisateur

Electro-Voice

Electro-Voice EVID FM4.2 Manuel utilisateur

Pioneer

Pioneer XW-HTD630 Manuel utilisateur

Onn

Onn BWA16AA002 Manuel utilisateur

HP

HP GL313AA - USB Speakers PC Multimedia Manuel utilisateur

User Guide

Pyram

Universal Mini Handsfree Bluetooth™ Speakers

with MP3 Micro-SD Card Slot

Pyram is a universal mini Bluetooth™ speaker with hands-free function for all Bluetooth

enabled mobile and tablet devices. Perfect for smartphone audio enhancement,

lightweight and portable, Pyram provides amazingly clear sound. Choose to play by

Bluetooth streaming from your smartphone or tablet, also by connecting 3.5mm audio

cable to any music source, or even by simply inserting a micro-SD card with music

tracks. This multifunctional mini speaker even provides high-quality hands-free function

which lets you stream phone calls from your smartphone. A uniquely designed

mini-speaker with sound beyond its size, Pyram simply covers it all.

Introduction

Features

•Universal Portable Bluetooth™ speakers

•Micro SD card port

•Ultra-sensitive high quality microphone

•Compatible with a wide range of phones, music players,

laptops, desktops, and tablets

•3.5mm Stereo Audio Line-in

•Intelligent Voice Prompt

•Pocket- sized, Ultra-Light, Portable,

•Micro-USB charging port

•Multi-color collection

Packing Contents

•Pyram

•USB Charging Cable

•User Guide

•Warranty Card

1

Pyram is a universal mini Bluetooth™ speaker with hands-free function for all Bluetooth

enabled mobile and tablet devices. Perfect for smartphone audio enhancement,

lightweight and portable, Pyram provides amazingly clear sound. Choose to play by

Bluetooth streaming from your smartphone or tablet, also by connecting 3.5mm audio

cable to any music source, or even by simply inserting a micro-SD card with music

tracks. This multifunctional mini speaker even provides high-quality hands-free function

which lets you stream phone calls from your smartphone. A uniquely designed

mini-speaker with sound beyond its size, Pyram simply covers it all.

Appearance and Interface Description

123

4 5 6 7 8 910

Mini- USB

Audio Jack Micro USB

2

1.)-Button

In Bluetooth mode :

•Press this button to adjust volume level down during Bluetooth mode .

In TF card Playback mode :

•Press and hold this button to adjust volume level down.

•Short press this button once to return to the beginning of current track or

previous track.

2.)+Button

In Bluetooth mode :

•Press this button to adjust volume level up during Bluetooth mode

In TF card Playback mode :

•Press and hold this button to adjust volume level up.

•Short press this button once to return to go to next track.

3.) Button

•While unit is in Bluetooth or TF card Playback mode, press once to play or pause the

current track.

•In Bluetooth mode, when receiving an incoming call on your cell phone, tap this button

once to answer the phone, press this button again or press and hold this button to end

the call or ignore the incoming call.

4.)Built-in Microphone

5.)Battery charging Indicator (Red color)

•Rapid flashing =low battery

While charging :

•Flashing =charging

•Steady Red= full charged

6.)Aux-In Jack

7.)Mini USB Charging jack

8.)TF card slot

9.)Operating mode indicator (Red/Blue/Purple)

•Blue color =Bluetooth mode

•Purple color= TF card playback mode

•Red=Aux-in mode

10.)Power On/Off selector

3

Technical Specification:

•Bluetooth™: Version 3.0

•Input power: 5V, 1A

•Output power: 2W

•Impedance: 3 Ohms

•Speaker frequency: 90-15K

•Signal-to-noise ratio: 50dB

•Charging time: 2 hours

•Playing time: 2 hours

•Battery capacity: 800mAh

•Operating distance: 10M

Battery Charging Instruction

This unit operates on a built-in Li-ion battery that can be recharged either using the USB

port on your computer or from a USB power adaptor (not included) with a rated output

of DC 5V 500mA and up.

Note: The mini USB CHARGING JACK located on this unit is only designed for charging

the built-in Li-ion battery.

Charging the Battery for First Time

1.) Charge the built-in Li-ion battery a minimum of 2 hours prior to first use.

Plug the unit into the USB port on your computer or into a USB power adaptor (not

included) using the included USB cable.

2.) The battery charging indicator flashes while charging and it stops flashing when the

unit is fully charged.

Unplug the USB cable from the power source once the battery is fully charged.

Recharging the Internal Battery

After prolonged use, the internal battery will become weak and the operation may

become intermittent. When the internal battery capacity is very low, the battery

Indicator will rapidly flash in red to alert you to recharge the internal battery as soon as

possible.

Plug the speaker into a USB port on your computer by using the included USB cable or

into a DC 5V, 500mA and up USB power adaptor (not included). Disconnect the USB

cable from the speaker as soon as it is fully charged.

3.) Button

•While unit is in Bluetooth or TF card Playback mode, press once to play or pause the

current track.

•In Bluetooth mode, when receiving an incoming call on your cell phone, tap this button

once to answer the phone, press this button again or press and hold this button to end

the call or ignore the incoming call.

4.)Built-in Microphone

5.)Battery charging Indicator (Red color)

•Rapid flashing =low battery

While charging :

•Flashing =charging

•Steady Red= full charged

6.)Aux-In Jack

7.)Mini USB Charging jack

8.)TF card slot

9.)Operating mode indicator (Red/Blue/Purple)

•Blue color =Bluetooth mode

•Purple color= TF card playback mode

•Red=Aux-in mode

10.)Power On/Off selector

4

Turn the Speaker Power ON/OFF

1.)Slide the Power ON/OFF selector on the bottom of the unit to ON position (where the

orange round mark on the selector can not been seen),a voice prompt “Power on” and a

beep sound is heard in 2-3 seconds. Meanwhile, the Operating mode indicator will flash

in blue.

2.)To turn the unit off, slide the Power ON/OFF switch to OFF

position (where the orange round mark on the selector can been seen).

Pairing (Linking) A Bluetooth Enabled Smartphone

Or Other Bluetooth Enabled Device To The Speaker

If the speaker has never been paired with a Bluetooth device before . You need to follow

the pairing instructions below to link the speaker with your Bluetooth device .

1.)When the speaker turned on, the Operating mode Indicator flashes in blue.The

speaker is ready to pair (link) with your Bluetooth device .

2.)Activate Bluetooth on the compatible device, and set it to search for compatible

devices.

3.)Select the speaker name:”Pyram” from the list of found devices.

Tips: Only one playback unit can be connected to the speaker. If the speaker is already

connected to another playback unit, the speaker will not appear in the BT selection list.

4.)If your device asks for a passkey (depending on the device manufacturers, model, and

software version), then enter digits “0000”(four zeros) and press OK.

If pairing has been carried out successfully, a voice prompt “Pairing completed” and a

beep sound is heard, meanwhile, the Blue color indicator stops flashing.

Notes:

1.)Charging time will vary if you are listening to music while charging the internal

battery. We recommend you switch off the speaker power during the charging process.

2.)To prolong the life of a rechargeable battery, it is recommended to completely

discharge it before fully charging it again .

3.)Rechargeable batteries need to be cycled for maximum performance and longer

battery life. If you don't use the player that often, be sure to recharge the battery at least

once a month in order to keep the internal battery working properly.

5

1.)Slide the Power ON/OFF selector on the bottom of the unit to ON position (where the

orange round mark on the selector can not been seen),a voice prompt “Power on” and a

beep sound is heard in 2-3 seconds. Meanwhile, the Operating mode indicator will flash

in blue.

2.)To turn the unit off, slide the Power ON/OFF switch to OFF

position (where the orange round mark on the selector can been seen).

If the speaker has ever been paired with a Bluetooth device before.

You need to follow the pairing instructions below to link the speaker

with your Bluetooth device .

1.)After turning on the speaker, the speaker will search for the last paired device . The

operating mode indicator will flash in blue. If the unit finds the paired Bluetooth device ,

a beep sound is heard and operating mode indicator will keep in blue and stop flashing .

2.)After successfully pairing (linking) , you can begin playing music from your Bluetooth

device wirelessly to the speaker .

3.)Press the + / - button on the speaker to adjust to the desired volume level .

Notes:

1.)Charging time will vary if you are listening to music while charging the internal

battery. We recommend you switch off the speaker power during the charging process.

2.)To prolong the life of a rechargeable battery, it is recommended to completely

discharge it before fully charging it again .

3.)Rechargeable batteries need to be cycled for maximum performance and longer

battery life. If you don't use the player that often, be sure to recharge the battery at least

once a month in order to keep the internal battery working properly.

Using The Speaker as a Handfree Bluetooth Speakerphone

1.)Link your smartphone to the speaker via Bluetooth as described above .

2.)When receiving an incoming call on your cell phone , tap button on the speaker to

switch the incoming call from cell phone to the speaker. A short beep sound will be

heard confirming the call was answered. Complete your call using the built-in

microphone and speaker.

3.)Adjust the volume control of your cell phone to obtain the desired sound level.

OPERATING THE SPEAKER IN TF-CARD MODE

•Insert the TF card carefully to the speaker to access TF card mode, the operating mode

indicator will be changed to Purple color. The TF card will start playing automatically in

few seconds.

•Press button to pause or resume playback.

•-Press and hold the “+” or “-” button to raise up/lower the volume level.

•Short Press “+” button to skip to next track or press “-” button to the previous track.

•To remove your TF card, simply pause the playback and gently unplug it from the slot.

Remember to turn off the speaker, too.

4.)To end the call, just tap the button again, a short beep sound will be heard and the

call will end. If you were playing music from your cell phone to the speaker before

answering the call, the music will automatically resume playing when you hang up .

5.)To ignore an incoming call, simply press and hold the button on the speaker for

about 2 seconds, a beep sound will be heard and the call will be ignored .

6

1.)After turning on the speaker, the speaker will search for the last paired device . The

operating mode indicator will flash in blue. If the unit finds the paired Bluetooth device ,

a beep sound is heard and operating mode indicator will keep in blue and stop flashing .

2.)After successfully pairing (linking) , you can begin playing music from your Bluetooth

device wirelessly to the speaker .

3.)Press the + / - button on the speaker to adjust to the desired volume level .

3.) Button

•While unit is in Bluetooth or TF card Playback mode, press once to play or pause the

current track.

•In Bluetooth mode, when receiving an incoming call on your cell phone, tap this button

once to answer the phone, press this button again or press and hold this button to end

the call or ignore the incoming call.

4.)Built-in Microphone

5.)Battery charging Indicator (Red color)

•Rapid flashing =low battery

While charging :

•Flashing =charging

•Steady Red= full charged

6.)Aux-In Jack

7.)Mini USB Charging jack

8.)TF card slot

9.)Operating mode indicator (Red/Blue/Purple)

•Blue color =Bluetooth mode

•Purple color= TF card playback mode

•Red=Aux-in mode

10.)Power On/Off selector

OPERATING THE SPEAKER IN AUX-IN MODE

If you are using an iPod, MP3/MP4 player or other mobile phone which can not connect

this unit via bluetooth directly, you can still play it on the speaker via an audio

connecting cable.

1.)Plug one end of the 3.5mm audio cable (excluded) into the headphone or line out jack

on your player, plug the other end of cable into the unit AUX-IN jack of the speaker.

2.)Turn on the external audio source and play your device.

3.)Slide the Power ON/OFF switch to ON position to turn on the unit, the operating

mode indicator will light up in Red.

4.)The volume level can now be controlled through the main unit. Operate all other

functions on the external device as usual.

Notes:

1). If you're connected to the Line out Jack of your external device, then you only need

to adjust the volume control of this speaker. If you're connected to the Headphone Jack

of your external device, then you may need to adjust both the volume control of your

external device and the volume control of this unit to find the most desirable volume

setting.

2)Slide the Power ON/OFF selector to OFF position to turn off the unit when you finish

listening.

Don't forget to switch off the power of your external device as well.

3)During AUX mode, if you plug TF card into the unit, the play mode will automatically

change to TF Card playback mode.

7

3.) Button

•While unit is in Bluetooth or TF card Playback mode, press once to play or pause the

current track.

•In Bluetooth mode, when receiving an incoming call on your cell phone, tap this button

once to answer the phone, press this button again or press and hold this button to end

the call or ignore the incoming call.

4.)Built-in Microphone

5.)Battery charging Indicator (Red color)

•Rapid flashing =low battery

While charging :

•Flashing =charging

•Steady Red= full charged

6.)Aux-In Jack

7.)Mini USB Charging jack

8.)TF card slot

9.)Operating mode indicator (Red/Blue/Purple)

•Blue color =Bluetooth mode

•Purple color= TF card playback mode

•Red=Aux-in mode

10.)Power On/Off selector

Fault Cause Solution

Troubleshooting Guide

Should you experience difficulties in the use of this player, please refer to the following

chart.

No Charging

The USB power adaptor (not

included) is not plugged into

a wall outlet or the USB

cable (included)is not

plugged into the mini USB

jack on the bottom of the

Pyram

Wall outlet is not functioning

Computer USB port is not

function.

Plug the USB power adaptor

(not included) into a wall

outlet and plug the USB

cable (included) into the

mini USB jack on the Pyram

Plug another device into the

same outlet to confirm the

outlet is working.

Make sure your computer

power is turned on and try

another USB port.

If you are using an iPod, MP3/MP4 player or other mobile phone which can not connect

this unit via bluetooth directly, you can still play it on the speaker via an audio

connecting cable.

1.)Plug one end of the 3.5mm audio cable (excluded) into the headphone or line out jack

on your player, plug the other end of cable into the unit AUX-IN jack of the speaker.

2.)Turn on the external audio source and play your device.

3.)Slide the Power ON/OFF switch to ON position to turn on the unit, the operating

mode indicator will light up in Red.

4.)The volume level can now be controlled through the main unit. Operate all other

functions on the external device as usual.

Notes:

1). If you're connected to the Line out Jack of your external device, then you only need

to adjust the volume control of this speaker. If you're connected to the Headphone Jack

of your external device, then you may need to adjust both the volume control of your

external device and the volume control of this unit to find the most desirable volume

setting.

8

3.) Button

•While unit is in Bluetooth or TF card Playback mode, press once to play or pause the

current track.

•In Bluetooth mode, when receiving an incoming call on your cell phone, tap this button

once to answer the phone, press this button again or press and hold this button to end

the call or ignore the incoming call.

4.)Built-in Microphone

5.)Battery charging Indicator (Red color)

•Rapid flashing =low battery

While charging :

•Flashing =charging

•Steady Red= full charged

6.)Aux-In Jack

7.)Mini USB Charging jack

8.)TF card slot

9.)Operating mode indicator (Red/Blue/Purple)

•Blue color =Bluetooth mode

•Purple color= TF card playback mode

•Red=Aux-in mode

10.)Power On/Off selector

Should you experience difficulties in the use of this player, please refer to the following

chart.

NO Sound The Pyram battery is

dead.

Recharge the Pyram

battery.

The Pyram is not

linked with the cell

phone.

Go through “Speaker

Operations” process to link

the speaker.

Volume set too low. Increase the volume of

your device.

No audio

signal via the

Bluetooth

connection

Speaker is not paired

to the audio source.

Check whether a

connection exists. If

necessary, pair the

speaker again to the audio

source.

Volume too low

Increase the volume on the

speaker

Increase the volume on the

audio source.

Speaker

cannot be

connected

Pairing does not work

Check whether the audio

source supports the A2DP

protocol

Audio source

is switched off Switch on the audio source

Bluetooth is switched

off at the audio

source.

Switch on the Bluetooth

function in the audio

source.

Bluetooth version is

not supported.

Use a different playback

unit.

Poor sound

quality from a

Bluetooth

®

device

Bluetooth device is

almost out of range of

the Pyram

Move your Bluetooth

device closer to the

Pyram

9