ProLite ZF01-D Manuel utilisateur
ZF01-D Wireless Module
User guide
Figure 1. ZF01-D wireless module
zInterface & Cable：
channel setting
switch
PC
Antenna
LED Sign
Interface
Interface
cable
Figure 2. ZF01-D RS-422 Interface & Cable
.
channel setting
switch
PC
Antenna
LED Sign
Interface
Interface
cable
Figure 3. ZF01-D RS-232 Interface & Cable
USB
channel setting
switch
PC
Antenna
LED Sign
Interface
Interface
cable
VCC
D-
D+
GND
Figure 4. ZF01-D USB Interface & Cable
channel setting
switch
PC
Antenna
LED Sign
Interface
Interface
cable
Figure 5. ZF01-D TTL Interface & Cable
Main Technical Specifications：
RF channels(MHz) 433.050,432.700,433.310,433.540,434.050,434.310,434.610,434.910
modulation mode GFSK
baud rate 9600bps
Interface data
format UART ,8E1/8N1 data format
Power supply DC 3.6V---5V
overall dimensions 70 X 45 X 17 mm
zCommunication Application：
Figure6. ZF01-D wireless communication application diagram
Channel setting
There is a channel setting switch as shown in Figure 2, defined as A,B,C respectively，so
there are 8 channels can be set .
Channel A2 A1 A0 Freq.
0OFFOFFOFF433.050MHz
1OFFOFFON 432.700MHz
2OFFON OFF433.310MHz
3OFFON ON 433.540MHz
4ON OFFOFF434.050MHz
5ON OFFON 434.310MHz
6ON ON OFF434.610MHz
7ON ON ON 434.910MHz
Wireless
communication
channel setting
PC
LED Sign
Interface
Interface
PC
LED Sign
Interface
Interface
TTL
RF
MCU
RS422
USB
RS232 TTL
RF
MCU
RS422
USB
RS232
zFCC Notices
1. The manufacturer is not responsible for any radio or TV Interference caused by unauthorized
modifications to this equipment. Such modifications could void the user’s authority to operate
the equipment.
2. This device complies with Part 15 of the FCC Rules. (1) This device may not cause harmful
interference, and (2) this device must accept any interference received, including interference
that may cause undesired operation.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one or more of
the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
—Consult the dealer or an experienced radio/TV technician for help.
This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled
environment. This equipment should be installed and operated with a minimum distance of 20
centimeters between the radiator and your body.
Table des matières
Autres manuels ProLite Module sans fil
Manuels Module sans fil populaires d'autres marques
Cooper Wiring Devices
Cooper Wiring Devices ESPIRE RF RFAPM Manuel utilisateur
Yuga
Yuga CLM920 Manuel utilisateur
Waldmann
Waldmann TALK Bluetooth Manuel utilisateur
Telit Wireless Solutions
Telit Wireless Solutions UC864-G Manuel d'installation
Ebyte
Ebyte E07-900M10S Manuel utilisateur
Quectel
Quectel SC690A Series Supplément
Panasonic
Panasonic INDUSTRY PAN9028 Guide de configuration rapide
Ebyte
Ebyte E70-433NW30S Manuel utilisateur
LongSung Technology
LongSung Technology U9507E Manuel utilisateur
Wistron NeWeb
Wistron NeWeb DNUR-S2 Manuel utilisateur
Ebyte
Ebyte E49-400M20S4 Manuel utilisateur
RF-Star
RF-Star SimpleLink RF-BM-2652P1 CC2652P Manuel utilisateur