PROIETTA IMPRESSIVE EVO 1200 Manuel utilisateur
!
!
INSTRUCTION MANUAL"
"
IMPRESSIVE EVO 1200/2500
WARNING:"
Read this instruction manual carefully before using the
projector!
Thank you for choosing a PROIETTA product#
721
533
344
INDEX
!
1) SAFETY INFORMATION!
2) TECHNICAL SPECIFICATIONS!
3) PACKAGE CONTENTS!
4) INSTALLATION OF THE PROJECTOR!
5) USE OF THE PROJECTOR!
6) CARE AND MAINTENANCE!
7) CAUSE AND SOLUTIONS OF POSSIBLE PROBLEMS!
8) WARRANTY!
9) DECLARATION OF CONFORMITY!
10) DISPOSAL OF UNUSED PRODUCT!
1!
2!
3!
4!
9!
11!
12!
13!
14!
14!
SAFETY INFORMATION
Read the following security information carefully before performing any operations. The
product described in this manual is a lighting fixture for projecting a light beam into
outdoor environments. !
Any other use is not provided by the manufacturer and therefore relieves him of any
liability for damages arising from misuse. !
The only maintenance operation allowed in warranty is the replacement of the lamp. Any
other repairs must be carried out solely by the manufacturer, who denies any
responsibility for unauthorized interventions.!
Warning: The surface temperature of some projector components can reach high enough
values to burn when touched directly, during and after shutdown.!
Always disconnect the projector from the outlet before any maintenance operation. The
risk of electric shock if you disassemble the projector or some of its parts.!
For reliable operation of the device, the ambient temperature must be between -35°C
(-31°F) and 40°C (104°F).!
The projector must be positioned in such a way that the objects affected by the light
beam are at least 5 meters away from the projector lens.!
Never place the projector on flammable and/or combustible surfaces.!
Be sure to securely attach the projector to an architectural element that ensures its
stability and reliability. All elements used for installation (screws, bolts, brackets, etc.)
must always be adjusted to the load they need to support.!
Use an M12 bolt with a self-locking nut and use a security chain in the event of a
suspended installation.!
Do not place objects on the power cable and in case of damage to the manufacturer for
replacement in order to avoid dangers of electrocution.!
The lamp generates UV radiation, since it’s an high pressure lamp, for this reason it is
important not to look through the opening at the front of the projector to avoid damaging
your eyes. Use protective goggles to replace the lamp.!
Air intakes should never be covered or clogged with any material. Be sure to provide
adequate ventilation to the projector to protect it from overheating. The projector should
not be placed in a closed installation or in a compartment that is too small and without
enough ventilation.!
Never touch the projector and all its components with wet hands.!
1
TECHNICAL SPECIFICATIONS
2
MODEL
IMPRESSIVE EVO 1200/2500
POWER SUPPLY
SUPPLY VOLTAGE
220/240 V
ELECTRICAL FREQUENCY
50/60 HZ
POWER ADJUSTMENT
SUPPLIED LAMP
PHILIPS MSR2000 MSR Gold 2000 W PGJX50 6050K Fast Fit - 6.050 K
PROJECTOR’S
BRIGHTNESS
40.000 lm
LIFE OF THE LAMPS
The manufacturers declare an average life of the lamps of 750 hours.
Since the Impressive has a power switch it is possible to increase the
duration of the same by selecting position 1 as it absorbs less power than
the lamp guarantees.
IP (Protection rating)
54
WEIGHT
32,4 kg
DIMENSIONS
See the drawings below (dimensions in mm)
READ CAREFULLY:
ADJUSTING POWER ON COMPATIBLE LAMPS
(OPERATION THAT MUST BE PERFORMED WITH THE PROJECTOR
SWITCHED OFF) !
LAMPS THAT WORK ONLY IN POSITION 1 (1200W): !
- PHILIPS MSR1200 ASEFF MSR Gold 1200W PGJX50 6000K "
- PHILIPS MSR1500 MSR Gold 1500W PGJX50 6000K Fast Fit !
LAMPS THAT WORK ON BOTH POSITIONS (1200W-2500W): !
- PHILIPS MSR2000 MSR Gold 2000W PGJX50 6050K Fast Fit"
- PHILIPS MSR GoldTM 2500/2 FastFit 1CT/4:"
"
These lamps support both powers:"
Position 1: energy-saving mode and long lamp life."
Position 2: maximum power mode (with this setting the life of the
2000W lamp will be lower than the data indicated by the manufacturer)!
1
2
PACKAGE CONTENTS
Unpack and ensure that there is no transportation damage before using the fixture. If not,
contact the manufacturer immediately. Do not attempt to operate a damaged fixture.!
Verify that the package contains the following items:!
-1 IMPRESSIVE EVO 1200/2500 projector!
-1 lens (chosen when ordering)!
-1 lamp PHILIPS MSR2000 MSR Gold 2000W PGJX50 6050K Fast Fit (already mounted
on the projector)!
-1 hexagonal key!
-3 measuring devices (are used to measure the distance of the lamp holder from the
body of the projector, in case of replacement of the supplied lamp)!
-1 power cable!
3
721
533
344
INSTALLATION OF THE PROJECTOR
Unscrew the knob (unlighted in red in Fig.1) on the back of the projector and open the
door to access the control panel. "
"
Fig. 1
The projector can be set by pressing the button 1, on the control panel, in energy-saving
mode at 1200W and by pressing the button 2 for the maximum power mode at 2500W
(following the informations provided in the section of the technical specifications for
choosing lamps in its respective modes).!
Other elements on the control panel in Figure 1 are: the power button (element A), the
main fuse of 20A for the lamp (element B), secondary fuse of 2A for accessories (element
C)."
"
4
DMX connector
panel to remove
if you install the
DMX4 PRO
control unit
(optional)
1
2
A
B C
Figure 2 represents the front control panel view that shows the motorized effects
connector and PRODMX4 card (element D)."
"
"
Fig. 2 !
5
D
MOUNTING/REPLACING LAMP
For the assembly/replacement of the lamp, remove the lamp replacement cover (A) as
shown in Figure 3.!
!
Fig. 3!
!
!
WARNING: If you need to replace the lamp, it is recommended that you wait 15 minutes
before opening the lid for access to the lamp after turning offthe projector. At this point
wait other 10 minutes, before touching it, to avoid burning.!
The steps to follow are:!
1. Unscrew the two hexagonal screws on the lid of the lamp holder (A) using the
hexagonal key provided, as shown in Figure 3.!
2. Rotate the lamp counterclockwise by handling it with a cloth for proper replacement.
Take the lamp offand replace it with the new one by inserting it into the appropriate
interlocking housing. Rotate it clockwise so that it can be fixed completely."
"
Centering of the lamp (calibration)!
3. At each replacement, the lamp must be centered. The centering operation can be
summarized in the following steps: "
- evaluate the positioning of the lamp by looking it from the front, see Fig. 4. "
- to adjust its position you need to act on the three screws on the lamp holder."
"
"
"
"
"
6
A
Fig. 4"
!
!
!
!
4. The lid of the lamp holder is closed again with the two screws.!
WARNING: The projector can mount lamps of different lengths and, depending on these,
you have to adjust the position of the lamp holder, helping you with one of the three
measuring devices provided (corresponding to the watts of the lamp you intend to
mount). See Figure 5."
7
INCORRECT POSITION"
CORRECT POSITION"
LAMP:
L (lamp lenght)
PHILIPS MSR1200 ASEFF MSR Gold 1200W
PGJX50 6000K
73,00 mm
PHILIPS MSR1500 MSR Gold 1500W PGJX50
6000K Fast Fit
73,00 mm
PHILIPS MSR2000 MSR Gold 2000W PGJX50
6050K Fast Fit
80,00 mm
PHILIPS MSR GoldTM 2500/2 FastFit 1CT/4
100,00 mm
Fig. 5!
!
This operation can be summarized in the following steps:!
-choose the measuring device corresponding to the lamp you want to mount and place
it on the projector to measure the distance to which the lamp holder should be placed,
as shown in Fig. 5.!
-Act on the hexagonal screw, highlighted in red in Figure 6, to move the position of the
lamp holder forward or backward depending on the distance indicated by the
measuring device."
"
"
Fig. 6"
!
"
6. Close the access door to the control panel making sure that the projector has been
closed properly again and in all its parts before turning it on (the lamp emits rays
harmful to the eyes).!
8
Ce manuel convient aux modèles suivants
1
Table des matières
Autres manuels PROIETTA Projecteur
Manuels Projecteur populaires d'autres marques
Panasonic
Panasonic PTL735NTU - LCD PROJECTOR-NETWORK IB Manuel utilisateur
NEC
NEC NP600S EDU Manuel utilisateur
BenQ
BenQ SH753P Manuel utilisateur
Eiki
Eiki EK-623U series Manuel utilisateur
Epson
Epson PowerLite Pro Cinema 6020UB Manuel utilisateur
Epson
Epson PowerLite Home Cinema 705HD Manuel utilisateur
