Progetto EVO EV105 Manuel
IMPORTANT!
Please read these instructions prior to installation
INSTALLATION INSTRUCTIONS
& USER MANUAL
EVO INTELLIGENT BIDET SHOWER SEAT SIDE INLET
EV105
www.plumbline.co.nz
Distributed by:
Please carefully check the bidet shower seay prior to installation to ensure it has not been damaged
during handling or transport, and check that all parts have been supplied.
We suggest you keep this manual after reading/installation for later reference.
Due to the continuous improvement of this products, details are subject to change without notice. The
illustrations in this manual are only schematic diagrams, please refer to the actual product for further
detail.
Please also read this manual carefully before using for the rst time so that you are familiar with the
functions, safety notes and user precuations.
General Installation Instructions
INSTALLATION INSTRUCTIONS
EVO INTELLIGENT BIDET SHOWER SEAT SIDE INLET | EV105
One (1) Year warranty from date of purchase.
Plumbline will undertake to replace free of charge any faulty product due to defects in materials or
manufacturer workmanship within the warranty period (Proof of purchase must be retained). Plumbline
will also supply parts and labour costs for the replacement or repair of any faulty product within One (1)
Year of installation date.
Plumbline (or their approved retailer) reserve the right to assess, repair, replace or service any warranty
claims as they see fit.
The above warranties are upheld providing the products have been used for normal domestic only and
exclude any defect or injury caused by or resulting from misuse, abuse or neglect, accidental damage,
improper installation or other alterations or modifications which affect the reliability or performance of
the item not attributed to faulty manufacture. The above warranties do not apply to the replacement of
products where damage is caused by normal wear and tear, where the hot water temperature exceeds
55˚C or where the warranty claim has not been notified to Plumbline (or their approved retailer) within
ninety (90) days of the problem first appearing.
The above warranties do not include consequential loss or damage due to the product.
Warranty Information
2
Safety Notes 4
User Precautions 4
Product Description 9
Components Description 10
Contents
Before use
Installation Steps 11
Method of Use 13
Installation and use
Cleaning & Maintenance 15
Faults & Troubleshooting 17
Product Dimensions 18
Product Technical Specication 19
Other
3
Please observe the following when replacing the
power cord:
If the power cord is damaged please replace it
immediately.
Only an authorised technician or electrician can
replace the power cord.
Read the safety instructions carefully before use so as to use the bidet seat correctly. Note
the following warnings relevant to safety
ProhibitedWarning Compulsory
Compulsory
Note
Failure to observe the above-mentioned warning signs may result in
injury or life-threatening risk.
Warning
Avoid splashing water on the bidet seat
Splashing may result in fire or electric shock.
Grounding
Check if the power supply is grounded.
Power supply must be grounded, or otherwise
product failure or electrical surge may occur.
Safety Notes
4
Only use a suitable power outlet socket.
Excessive loads on multi-outlet
powerboards is strictly prohibited.
May result in overheating or fire.
Do not pull on the power plug/ power
cord.
May result in fire or electric shock.
Do not touch the power plug
with wet hands.
Ensure that no water, cleaning
chemical or urine comes in
contact with the power plug.
May result in fire or
electric shock.
Do not use if socket is loose.
May result in fire or electricshock.
May result in skin infections or
product damage.
Do not connect to a
substandard water pipe
May result in electric shock.
industrial
water
Wells
Safety Notes
5
Do not place heavy objects on the
toilet seat or the toilet seat cover
May result product damage.
Do not invert product.
May result in product damage.
May result in water leakage.
Do not bend or twist the
water supply hose.
Do not use cigarettesor other
combustible items near the bidet seat.
May result in fire.
May result in product damage.
Please clean with adiluted kitchen cleaning agent.
Do not use the following items:
Benzene, paint thinner, detergent powder, nylon brush, etc.
Do not disassemble, repair and modify
without authorization.
May result in fire or electric shock.
Unplug the power supply when
cleaning the bidet seat.
May result in electric shock.
Safety Notes
6
Ensure room temperature is above 0°C.
If temperature is below 0°C
water supply can freeze.
Do not place this product in direct sunlight.
May cause product discoloration
and failure of seat heating function.
Do not use substandard power supply.
May cause bidet seat failure.
Do not shower urine on the bidet
body and nozzle.
When not in use for a long time, drain the
stored water and pull out the power plug.
May result in water pollution and skin
infections.
Do not lean against the toilet
seat lid when in use
May cause damage to the lid.
Pull out the power plug when
lightning strikes.
May result in product failure or
damage.
May result in blockage.
User Precautions
7
Disassembly button
Functional setting key
Toilet cover
Toilet seat
Nozzle
Control Knob
Water supply hose
joint
Drain plug
Power plug
Control Knob
STOP
Bidet Hip washing
Water temperature
adjustment key
Water temperature
adjustment indicator
Seat temperature
adjustment key
Seat temperature
adjustment indicator
Functional setting key
Product Description
8
1.Cover plate
4.T-junction 5. Water inlet hose
2. Installation template
6. Installation
Instructions
Filter
3.Fixing parts
Expansion bolt (2)
(up lock)
Screw (2)
Adjustment sheet (2) Nut (2)
(down lock)
Fixing plate (1)
Installation
Instructions
Note: There are two installation methods for this product (see 3A and 3B on the following
page). Please choose one of the methods according to the actual situation .
Component Description
9
Installation tools
Installation precautions
1. Recommended Water pressure range: 0.1-0.75MPa.
2. Water inlet valves must be located close to the location where this
product is installed and disassembled.
1.Remove the old toilet seat plate.
Note: You can choose installation method 3A or
3B depending on the actual situation.
2.Place the installation template on top
of the toilet as shown. Align it with the
rim of toilet.
3A. Install fixing plate (up locking)
(2)Place the stainless steel adjusting sheets
in the mounting groove, align the expansion
boltsand tighten the screws.
(1)
Insert the expansion boltsinto the holes on
the toilet, and place the fixing plate in the
notch part of installation template.
Screw
Fixing plate
Adjustment sheet
3B. Install fixing plate (down locking)
(1)Place the fixing plate in the notch part of
mounting template.
(2)Place the stainless steel adjusting sheet
in the mounting groove, align the holes on the
toilet and place in the screw. Screw on the
plastic nutsfrom the underside of the toilet.
Cross screwdriver Adjustable wrench Bucket and rag
Expansion bolt
Screw
Fixing plate
Adjustment sheet
Nut
Installation Procedure
Installation Steps
10
Table des matières
Autres manuels Progetto Toilettes
Manuels Toilettes populaires d'autres marques
Better Bathrooms
Better Bathrooms BUN/BeBa 27555/78725 Manuel utilisateur
American Standard
American Standard CONCEPT Cube TF-2704 Manuel utilisateur
BIOLAN
BIOLAN ECO Manuel de la liste des pièces
Thetford
Thetford C260 Series Manuel utilisateur
KELISS
KELISS T162A Series Manuel utilisateur
Kohler
Kohler K-22241K Instructions de montage
