Progetto EV105 Manuel
IMPORTANT!
Please read these instructions prior to installation
INSTALLATION INSTRUCTIONS
& USER MANUAL
EVO BIDET SHOWER TOILET SEAT | EV105
www.plumbline.co.nz
Distributed by:
Please carefully check the bidet shower seat prior to installation to ensure it has not been damaged
during handling or transport, and check that all parts have been supplied.
We suggest you keep this manual after reading/installation for later reference.
Due to the continuous improvement of our products, details are subject to change without notice.
The illustrations in this manual are only schematic diagrams, please refer to the actual product for
further detail.
Please also read this manual carefully before using for the rst time so that you are familiar with the
functions, safety notes and user precuations.
General Installation Instructions
Two (2) Year warranty from date of purchase.
Plumbline will undertake to replace free of charge any faulty product due to defects in materials or
workmanship within the warranty period from date of purchase. Proof & date of purchase must be
retained and provided with any warranty claim and Plumbline (or their approved retailer) reserve the
right to assess, repair, replace or service any product as they see fit and replacements may be an
equivalent to the original product.Plumbline (or their approved retailer) reserve the right to assess,
repair, replace or service any warranty claims as they see fit.
Above warranties apply to products installed in residential dwellings and light commercial
installations such as apartments, rest homes & hotels. Products used in commercial applications,
and labour & parts warranty time periods may differ from above replacement product warranties.
Please refer to our website for full terms & conditions www.plumbline.co.nz/warranty-information.
The above warranties do not include consequential loss or damage due to the product.
Warranty Information
INSTALLATION INSTRUCTIONS
EVO BIDET SHOWER TOILET SEAT | EV105
2
Safety Notes 4
User Precautions 4
Product Description 9
Components Description 10
Before use
Installation Steps 11
Method of Use 13
Installation and use
Cleaning & Maintenance 15
Faults & Troubleshooting 17
Product Dimensions 18
Product Technical Specication 19
Other
Safety Notes
3
Read the safety instructions carefully before use so as to use the bidet seat correctly.
Note the following warnings relevant to safety
Failure to observe the above-mentioned warning signs may result in injury or life-
threatening risk.
Safety Notes
4
Warning Mandatory NoteProhibited
Avoid splashing water on the bidet seat
Splashing may result in re or electric shock.
Check that the power supply is grounded
Power supply must be grounded, or otherwise product failure
or electrical surge may occur.
Grounding
Please observe the following when replacing the
power cord:
If the power cord is damaged please replace it immediately.
Only an authorised technician or electrician can replace the
power cord.
Compulsory
Safety Notes
5
Only use a suitable power outlet
socket. Excessive loads on
multi-outlet powerboards is
strictly prohibited.
May result in overheating or re.
industrial
water
Wells
Ensure that no water, cleaning
chemical or urine comes in
contact with the power plug.
May result in re or electric shock.
Do not pull on the power plug/
power cord.
May result in re or electric shock.
Do not use if socket is loose.
May result in re or electric shock.
Do not touch the power plug with
wet hands.
May result in electric shock.
Do not connect to a substandard
water pipe
May result in skin infections or product
damage.
Only use the new hose sets supplied with the bidet seat.
Do not use any old hose or any other hose than what is supplied.
Water supply pressure: 0.1-0.75Mpa
Safety Notes
6
Do not disassemble, repair and
modify without authorization.
May result in re or electric shock.
Always unplug the power supply
when cleaning the bidet seat.
May result in electric shock.
Do not use cigarettes or other
combustible items near the bidet
seat.
May result in re.
Do not bend or twist the water
supply hose.
May result in water leakage.
Do not place heavy objects on the
toilet seat or the toilet seat cover.
May result in product damage.
Do not invert product
May result in product damage.
Please clean with a non-abrasive cleaning agent.
Do not use the following items: benzene, paint thinner,
detergent powder, nylon brush, etc.
May result in product damage.
User Precautions
7
Do not place this product in direct
sunlight.
May cause product discoloration and
failure of seat heating function.
Ensure room temperature is
above 4°C.
If temperature is below 4°C water supply
can freeze.
Do not shower urine on the bidet
body and nozzle.
May result in blockage.
Do not use a substandard power
supply.
May cause bidet seat failure.
Do not lean against the toilet seat
lid when in use.
May cause damage to the lid.
Pull out the power plug when
lightning strikes.
May result in product failure or damage.
When not in use for a long time, drain the
stored water and pull out the power plug.
May result in water pollution and skin infections.
Product Description
8
Toilet seat lid
Drain plug
Toilet seat
Nozzle
Control knob
Water supply
hose connection
Power plug
Disassembly button
Function settings key
Function Settings Key Control Knob
Water temperature
adjustment indicator
Seat temperature
adjustment indicator
Seat temperature
adjustment key
Water temperature
adjustment key Bidet Rear Wash
STOP
Component Description
9
1. Bidet Shower Toilet Seat 2. Installation template
3. Mounting ttings
Screw (2)
Adjustment plate (2)
Fixing bracket (1)
Nut (2)
Expansion bolt (2)
4. T-junction with lter 5. Water inlet hose 3. Installation instructions
Filter screen
Installation
Instructions
Installation
10
1. Water supply pressure: 0.1-0.75MPa, please follow the instructions.
2. Ensure the angle valve is installed close to the bidet seat water inlet location.
3. Before any hoses are connected to the angle valve rstly ush it out to clear impurities and
sludge that may have been embedded in the pipe prior to/during installation.
4. Only use the new hose sets supplied with the bidet seat. Do not use any old hose or any other
hose than what is supplied.
Phillips screwdriver Adjustable wrench Bucket and rag
1. Remove the existing toilet seat.
2. Place the installation template on top of the toilet as
shown. Align it with the rim of toilet.
3A. For toilets with closed sides
Install mounting ttings as follows:
1. Insert the expansion bolts into the holes on the
toilet, and place the xing bracket in the notched
out part of installation template.
2. Place the stainless steel adjustment plates in the
mounting groove, align the expansion bolts and
tighten the screws.
1. Place the xing bracket in the notched out part of
installation template.
2. Place the stainless steel adjustment plates in the
mounting groove, align the holes on the toilet and
place in the screws. Screw on the plastic nuts
from the underside of the toilet.
3B. For toilets with open sides
Install mounting ttings as follows:
Note: choose installation method 3A or 3B depending on toilet design
Screw
Adjustment plate
Fixing bracket
Expansion bolt
Screw
Adjustment plate
Fixing bracket
Nut
Installation Tools
Pre-Installation Precautions
Installation Procedure
Table des matières
Autres manuels Progetto Toilettes
Manuels Toilettes populaires d'autres marques
Better Bathrooms
Better Bathrooms BUN/BeBa 27555/78725 Manuel utilisateur
American Standard
American Standard CONCEPT Cube TF-2704 Manuel utilisateur
BIOLAN
BIOLAN ECO Manuel de la liste des pièces
Thetford
Thetford C260 Series Manuel utilisateur
KELISS
KELISS T162A Series Manuel utilisateur
Kohler
Kohler K-22241K Instructions de montage
