8
EN
By purchasing this mixer, you have acquired a high-quality,per-
fected and efficient machine.
Keep these instructions in a safe place for later reference.
Be sure that you have carefully read and
fully understood these instructions before
you start the machine,and adhere to all of
them.
CONTENTS
Meaning of the symbols 8
Symbols in the operating manual 8
Proper use 8
Residual risks 8
Operating times 8
Safety instructions 8, 9
Start-up 9
Mixing 9, 10
Transport 10
Storage 10
Cleaning 10
Maintenance 10
Repair 10
Equipment failures 11
Guarantee 11
EC Declaration of Conformity 44,45
Technical data 46,47
Spare parts 48, 49
SYMBOLS IN THE OPERATING MANUAL
Potential hazard or hazardous situation.Failure to
observe this instruction may lead to injuries or cause
damage to property.
Important information on proper handling. Failure to
observe this instruction may lead to faults.
User information. This information helps you to use all
the functions optimally.
Assembly, operation and servicing. Here you are ex-
plained exactly what to do.
PROPER USE
• This concrete mixer can be used for mixing concrete and
mortar both professionally and non-professionally.
• Proper use includes adherence to the operating, maintenance
and repair instructions of the manufacturer and observance of
the safety instructions they contain.
• Any other utilisation counts as improper use, especially mixing
combustible or explosive materials (fire and explosion hazard)
and use with foodstuffs.The manufacturer is not liable for
damages resulting from improper use,→ the user alone shall
bear the risk.
• Unauthorised modifications on the device exclude a liability of
the manufacturer for damages of any kind resulting from it.
• Only persons who are familiarised with the device and informed
about possible risks are allowed to prepare,operate and service
this device. Repair works may only be carried out by us or by a
customer service agent nominated by us.
RESIDUAL RISKS
Even if used properly, residual risks can exist even if the
relevant safety regulations are complied with due to the design
determined by the intended purpose.
Residual risks can be minimised if the “Safety instructions”
and the “Intended usage” as well as the whole of the operating
instructions are observed.
Observing these instructions, and taking proper care, will reduce
the risk of personal injury or damage to the equipment.
• Risk of injury to fingers and hands when reaching with the hand
into the running mixing drum.Providing protection against the
danger of getting caught in the rotating stirring grating would
not be practicable (please refer to EN 12151).
• Risk from electricity when using improper electrical
connections.
• Touching live parts of opened electrical components.
In addition, in spite of all the precautionary measures taken,non-
obvious residual risks can still exist.
OPERATING TIMES
Please observe as well the regional regulations for noise
protection.
SAFETY INSTRUCTIONS
Take note of the following instructions to protect
yourself and others from hazards and injuries.
• Observe local accident prevention and safety regulations in the
work area.
• Do not touch,inhale (dust development) or eat the cement
or additives.Wear personal, protective clothing (gloves, goggles
and a dust mask) when filling and emptying the mixing drum.
• Set up and run the concrete mixer on a solid,
level base only (where it will not tip over).
• Make sure that there is no danger of tripping
near the mixer.
• Be sure that there is enough light.
• The operator is responsible for third parties in the work area.
• Keep children away from mixer.
• Persons younger than 16 years of age are not allowed to
operate the mixer.
• Only use the mixer for the functions listed in “Proper use”.
• Do not alter the machine or any of its parts.
• Replace defective or damaged parts on the machine
immediately.
• Only start up the mixer if the protective devices are complete
and undamaged.
•Do not reach into mixer when it is running
( rotating mixing apparatus). Observe enough
safety distance to the concrete mixer. Prevent
any contact to rotating or moving parts of the
machine.
• Fill or empty the mixing drum only when the motor is running.
• Observe the mixer’s direction of rotation.
• Do not alter the revolution speed of the motor, since this
controls the safe maximum operating speed,and protects the
motor and all rotating parts against damage due to excess
speed.
• Concrete mixers which the manufacturer has not intended for
towed vehicle operation may only be run by means of a hand
wire pull.
• Be absolutely sure to pull the plug before:
- moving or transport
- cleaning, maintenance or repair work
- eliminating faults
- checking connecting lines, whether these are knotted or
damaged
- leaving unattended (even during short interruptions)
I
PROF_IM_502228971.indd 8PROF_IM_502228971.indd 8 14.2.2022 16.28.1914.2.2022 16.28.19
