PROAIM SS-CT Manuel utilisateur

What’s In The Box

Please inspect the contents of your shipped package to ensure you have received everything that

is listed below.

No part of this document may be reproduced, stored in a retrieval system, or transmied by any form or by any means,

electronic, mechanical, photo-copying, recording, or otherwise, except as may be expressly permied by the applicable copyright

statutes or in wring by the Publisher.

Stabilizer System for Camera Producon Carts (SS-CT)

Assembly Manua l

2 Stage Riser and 5/8” Baby Pin Adapter

Accessory Cross Bar Clamp

with 4 x Locking knobs

Bumper with Clamp

Vest Mount Default

System

 Loosen the locking knob of the vest mount

default system and aach it to the cart post.

 Tighten the locking knob of the vest mount

default system to secure it.

 Easily hang the ycam owline onto the vest

mount default system, as shown in the image.

 Loosen the vest mount default system knob

and mount it to the crossbar as per your

requirement.

Stabilizer System Setup

 Tighten the locking knob and loosen the

crossbar clamp ratchet knob.

 Insert the 2 Stage riser with 5/8”baby pin

adapter into the crossbar clamp and ghten

the knob to secure it.

YOUR PROAIM STABILIZER SYSTEM FOR CAMERA PRODUCTION CARTS

ALL DRESSED UP AND READY TO GO!

(SHOWN WITH OPTIONAL ACCESSORIES)

 To increase the length of 2 Stage riser with

5/8” baby pin, loosen the ratchet knob, adjust

the height as per requirements and ghten

the knob back.

 Now, insert the 2 Stage riser with 5/8” baby

pin into the bumper with a clamp and ghten

the knob.

 Lastly, again Insert the 2 Stage riser with 5/8”

baby pin adapter into the crossbar clamp and

ghten the ratchet knob to secure it.

Warranty: We oer one year warranty for our products from date of purchase. Within this period of me,

we will repair it without charge for labor or parts. Warranty doesn’t cover transportaon costs nor does it

cover a product subjected to misuse or accidental damage. Warranty repairs are subjected to inspecon

and evaluaon by us.

Liability: We are not liable for damage caused by products that we do not supply or from mishandling in

transit, accident, misuse, neglect, lack of care of the product, or service by anyone other than our company.

utmost support and care unl you use our product.

Table des matières

Autres manuels PROAIM Support et étagère

PROAIM

PROAIM CINEMA Series Manuel utilisateur

PROAIM

PROAIM SR-SBP-01 Manuel utilisateur

PROAIM

PROAIM CM-ISGP-01 Manuel utilisateur

PROAIM

PROAIM SnapRig GP205 Manuel utilisateur

PROAIM

PROAIM P-GMBC-01 Manuel utilisateur

PROAIM

PROAIM VCTR-CM Manuel utilisateur

PROAIM

PROAIM CINEMA P-GH-30 Manuel utilisateur

PROAIM

PROAIM VESA Manuel utilisateur

PROAIM

PROAIM TP-FWBS-01 Manuel utilisateur

PROAIM

PROAIM GP-FTGP-01 Manuel utilisateur

PROAIM

PROAIM Alpha Manuel utilisateur

PROAIM

PROAIM P-BMMT-01 Manuel utilisateur

PROAIM

PROAIM AP-PTP-SCSR Manuel utilisateur

PROAIM

PROAIM CINEMA Series Manuel utilisateur

PROAIM

PROAIM SBP-02 Manuel utilisateur

Manuels Support et étagère populaires d'autres marques

Salamander

Salamander Acadia AC/W/L400/WH Manuel utilisateur

Fohhn

Fohhn VAT-09 Guide de l'utilisateur

ricoo

ricoo FS0522 Manuel utilisateur

AMSOIL

AMSOIL BMK-22 Guide rapide

Kargo Master

Kargo Master 48220 Manuel utilisateur

Milestone AV Technologies

Milestone AV Technologies SIMPLICITY SLF2 Manuel utilisateur

ricoo

ricoo S1222 Manuel utilisateur

Ready-Set-Mount

Ready-Set-Mount RSMCM602 Manuel utilisateur

VidaBox

VidaBox VB MNT FFS2 Manuel utilisateur

Welch Allyn

Welch Allyn 48960 Manuel utilisateur

Arkon

Arkon CM035-ST-2 Manuel utilisateur

PROEL

PROEL PLWIN60C Manuel utilisateur

Agilent Technologies

Agilent Technologies E2609B Manuel utilisateur

Mustang

Mustang MV-ARM4 Manuel utilisateur

Mounting Solutions

Mounting Solutions WRM-320 Manuel utilisateur

Pyle

Pyle PMKSPAD1 Manuel utilisateur

ShelterIt

ShelterIt 21208 Manuel utilisateur

SPL

SPL RackPack?4 1040 Manuel utilisateur