Pro-Star 1K Manuel utilisateur

HIGH FREQUENCY ONLINE UPS

USER MANUAL

1KVA/2KVA/3KVA/6KVA/10KVA

PF 1.0

Table of Contents

CHAPTER 1 SAFETY INSTRUCTIONS ..........................................................................................................................1

1.1 About This Manual .......................................................................................................................................... 1

1.2 Transportation ..................................................................................................................................................1

1.3 Preparation ....................................................................................................................................................... 1

1.4 Installation ........................................................................................................................................................1

1.5 Operation .......................................................................................................................................................... 2

1.6 Maintenance ..................................................................................................................................................... 2

1.7 Deenergizing Safety ........................................................................................................................................3

1.8 Standards ..........................................................................................................................................................3

CHAPTER 2 SYMBOLS DESCRIPTION ......................................................................................................................... 4

2.1 General Introduction ....................................................................................................................................... 4

2.2 Symbols Information .......................................................................................................................................4

CHAPTER 3 INSTALLATION AND SETUP .................................................................................................................... 5

3.1 Unpacking and Inspection ..............................................................................................................................5

3.2 Product Rear View ........................................................................................................................................... 5

3.3 Rack Mount UPS Installation ....................................................................................................................... 12

3.4 Setup the UPS ................................................................................................................................................ 12

CHAPTER 4 OPERATION ..............................................................................................................................................17

4.1 Button Operation ........................................................................................................................................... 17

4.2 LCD Display Icons ..........................................................................................................................................18

4.3 LED Indicators ................................................................................................................................................19

4.3 Audio Alarm .................................................................................................................................................... 20

4.4 UPS Working Status ...................................................................................................................................... 20

4.5 LCD Display Information .............................................................................................................................. 20

4.6 UPS Operation ................................................................................................................................................22

4.7 UPS Setting ..................................................................................................................................................... 25

4.8 Operation Mode Description ........................................................................................................................ 29

4.9 Fault and Alarm Information ........................................................................................................................30

4.10 UPS Parallel.................................................................................................................................................. 31

CHAPTER 5 TROUBLESHOOTING .............................................................................................................................. 33

CHAPTER 6 STORAGE AND MAINTENANCE ............................................................................................................ 35

6.1 Prior to Installation ........................................................................................................................................35

6.2 After Usage .....................................................................................................................................................35

CHAPTER 7 SPECIFICATIONS .................................................................................................................................... 36

7.1 Specification of Tower Type UPS 1KVA - 3KVA ......................................................................................... 36

7.2 Specification of Tower Type UPS 6KVA - 10KVA .......................................................................................37

7.3 Specification of Rack Mount UPS 1KVA - 3KVA.........................................................................................39

7.4 Specification of Rack Mount UPS 6KVA - 10KVA ...................................................................................... 40

7.5 Specification of Rack Mount Battery Pack ................................................................................................. 41

CHAPTER 1 SAFETY INSTRUCTIONS

1.1 About This Manual

Purpose

Please comply with all warnings and operating instructions in this manual strictly. Save this manual

properly and read carefully the following instructions before installing the unit.

Scope

This manual provides safety and installation guidelines as well as information on wiring.

1.2 Transportation

Transport the unit only in suitable packaging to protect it from jolts and shocks. The UPS must be kept

upright at all times and handled with care.

1.3 Preparation

Condensation may occur if the UPS system is moved directly from cold to warm environment. The UPS

system must be absolutely dry before being installed. Please allow at least two hours for the UPS

system to acclimate the environment.

Do not install the UPS system near water or in moist environments.

Do not install the UPS system where it would be exposed to direct sunlight or near heater.

Do not block ventilation holes in the UPS housing.

1.4 Installation

Do not connect appliances or devices which would overload the UPS system (e.g. laser printers) to

the UPS output sockets or terminals.

Place cables in such a way that no one can step on or trip over them.

Do not connect domestic appliances such as hair dryers to UPS output sockets.

The UPS can be operated by any individuals with no previous experience.

Connect the UPS system only to an earthed shockproof outlet which must be easily accessible and

close to the UPS system.

When installing the equipment, it should ensure that the sum of the leakage current of the UPS

and the connected devices does not exceed 3.5mA.

1.5 Operation

Do not disconnect the mains cable on the UPS system or the building wiring outlet (shockproof

socket outlet) during operations since this would cancel the protective earthing of the UPS system

and of all connected loads.

The UPS system features its own, internal current source (batteries). The UPS output sockets or

output terminals block may be electrically live even if the UPS system is not connected to the

building wiring outlet.

In order to fully disconnect the UPS system, first press the button to disconnect the

mains.

Prevent no fluids or other foreign objects from inside of the UPS system.

1.6 Maintenance

The UPS system operates with hazardous voltages. Repairs may be carried out only by qualified

maintenance personnel.

CAUTION - risk of electric shock.

Even after the unit is disconnected from the mains (building wiring outlet), components

inside the UPS system are still connected to the battery and electrically live and

dangerous.

Before carrying out any kind of service and/or maintenance, disconnect the batteries and verify that no

current is present and no hazardous voltage exists in the terminals of high capability capacitor such as

BUS-capacitors.

Only persons are adequately familiar with batteries and with the required precautionary measures may

replace batteries and supervise operations. Unauthorized persons must be kept well away from the

batteries.

CAUTION - risk of electric shock.

The battery circuit is not isolated from the input voltage. Hazardous voltages may occur

between the battery terminals and the ground. Before touching, please verify that no

voltage is present!

Batteries may cause electric shock and have a high short-circuit current. Please take the precautionary

measures specified below and any other measures necessary when working with batteries:

remove wristwatches, rings and other metal objects.

use only tools with insulated grips and handles.

When changing batteries, install the same number and same type of batteries.

Do not attempt to dispose of batteries by burning them. This could cause battery explosion.

Do not open or destroy batteries. Escaping electrolyte can cause injury to the skin and eyes. It may be

toxic.

1.7 Deenergizing Safety

The UPS contains internal batteries and may present a shock hazard even when disconnected from

branch circuit(mains). Before installing or servicing the equipment check that the:

Input circuit breaker in the OFF position.

Internal UPS batteries are removed.

1.8 Standards

* Safety

IEC/EN 62040-1

* EMI

Conducted Emission................................... :IEC/EN 62040-2

Category C3

Radiated Emission....................................... :IEC/EN 62040-2

Category C3

*EMS

ESD...................................................................:IEC/EN 61000-4-2

Level 4

RS.......................................................................:IEC/EN 61000-4-3

Level 3

EFT.................................................................... :IEC/EN 61000-4-4

Level 4

SURGE............................................................. :IEC/EN 61000-4-5

Level 4

CS.......................................................................:IEC/EN 61000-4-6

Level 3

Power-frequency Magnetic field.................:IEC/EN 61000-4-8

Level 4

Low Frequency Signals................................ :IEC/EN 61000-2-2

Warning: This is a product for commercial and industrial application in the second

environment-installation restrictions or additional measures may be needed to prevent disturbances.

CHAPTER 2 SYMBOLS DESCRIPTION

2.1 General Introduction

This series UPS, available in 1kVA, 2 kVA, 3 kVA, 6 kVA and 10 kVA, is an advanced online and

double-conversion UPS providing reliable and consistent pure sine-wave quality power to your

equipment. It supports personal computers, networks, servers, telecommunication equipment and a

variety of other facilities. It provides protection for electronic equipment from utility power blackouts,

brownouts, sags, surges, small utility power fluctuations and large disturbances. It also provides

battery backup power for connected equipment until utility power returns to acceptable levels or the

batteries are fully discharged.

Each model has internal batteries and can connect to the external battery pack (optional). The unit

provides output power factor up to 1.0, produces greater smoothly at all times.

2.2 Symbols Information

ICON

Information

ICON

Information

Pay attention

Ground

High voltage danger

Alarm cut off

Turn on UPS

Overload

Turn off UPS

Battery inspection

Function button

Repeat cycle

Page UP / Down

Do not place it with the sundries

Alternating current

Battery

Direct current

CHAPTER 3 INSTALLATION AND SETUP

There are two different types of online UPS: short-backup and long-run models. Please refer to the

following model table.

Model

Type

Model

Type

Long-run Online UPS

1KB

Short-backup Online UPS

2KB

3KB

6KB

10K

10KB

3.1 Unpacking and Inspection

Unpack the package and check the package contents. The shipping package contains:

●One UPS

●One user manual

●One battery cable (only for long-run models)

During UPS transportation, some unpredictable situations might occur. It is recommended that you

inspect the UPS’s exterior packaging. If you notice any damage, please immediately contact the dealer

from whom you purchased the unit.

NOTE: Before installation, please inspect the unit. Be sure that nothing inside the

package is damaged. Please keep the original package in a safe place for future use.

3.2 Product Rear View

3.2.1 Rear for Tower Type

Universal Type

IEC Type

Schuko Type

IEC Type

Universal Type

Schuko Type

Universal Type

IEC Type

6K-10K

1KB

2KB

Universal Type

IEC Type

Schuko Type

Universal Type

Schuko Type

IEC Type

Ce manuel convient aux modèles suivants

Table des matières

Manuels UPS populaires d'autres marques

Pylontech

Pylontech Victron & Pylontech US5000 Manuel utilisateur

Tecnoware

Tecnoware EVO DSP PLUS MM 6.8 Manuel utilisateur

Mecer

Mecer ME-1000-WTU Manuel utilisateur

Mustek

Mustek PowerMust 530(B) Plus Manuel d'installation et d'exploitation

Emerson

Emerson Liebert NXL series Manuel utilisateur

MAKELSAN

MAKELSAN BOXER SERIES Manuel utilisateur

Block

Block PC-0524-400-0 Manuel utilisateur

CyberPower

CyberPower CP585LCD Manuel utilisateur

Eaton

Eaton 3S Instructions de montage

CyberPower

CyberPower Office Tower Series UPS 1000 Manuel utilisateur

CyberPower

CyberPower BM100 Manuel utilisateur

Best Power

Best Power 610 Manuel utilisateur

Best Power

Best Power Unity/I UT3K Manuel utilisateur

Mustek

Mustek PowerMust 400 Offline Manuel utilisateur

Xantrex

Xantrex Trace 512 UR-UPS Manuel utilisateur

Forza

Forza SL-1501UL Manuel utilisateur

LEGRAND

LEGRAND keor 310081 Manuel utilisateur

ABB

ABB Conceptpower DPA 500 Manuel utilisateur