Pro master COMPACT STUDIO FLASH TRIGGER Manuel utilisateur

Thank you for your purchase of the PROMASTER COMPACT STUDIO FLASH TRIGGER. The ProMaster Compact

Studio Flash Trigger is a perfect addition to any studio flash system. The compact design plugs directly into the sync

port on your studio flash. The 8 channel, 2.4ghz trigger is engineered to reduce interference providing the maximum

reliability both indoors and out.

FEATURES

- Works with any studio flash with a standard sync port

- Flash sync speeds up to 1/250th second

- Operates on 2.4ghz frequency to minimize RF interference

- 8 operating channels helps achieve the most reliable operation and allows for the use of multiple triggers in the same

shooting set up

- Trigger uses hot shoe or PC cord for maximum compatibility

OPERATION

1. Transmitter Indicator Light

2. Test Button

3. Transmitter Battery Compartment

4. Transmitter Hot Shoe Foot

5. Hot Shoe Contacts

6. Transmitter Channel Selection Switch

7. PC Sync Line Jack

8. Receiver Output Plug

9. Receiver Channel Selection Switch

10. Receiver Indicator Light

11. Power Switch

12. Receiver Battery Compartment

13. Mini Plug Adapter

14. PC Sync Cord

1. Open the battery cover of the receiver (12). Insert two AAA batteries. Be sure to observe the correct polarity.

Replace the cover. Open the battery cover of the transmitter (3). Insert one CR2 battery. Be sure to observe the

correct polarity. Replace the cover on the transmitter.

2. Select a channel by setting switches on the receiver using the Receiver Channel Selection Switch (9). Set the

transmitter switches to the same position using the Transmitter Channel Selection Switch (6). Turn on the power to

the receiver using the Power Switch (11). The Receiver Indicator Light (10) will blink. Test your connection by

pressing and holding the Test Button (2). The Receiver Indicator Light (10) should remain lit while you are holding

down the test button confirming the connection.

If the Signal Indicator Light does not remain lit while holding down the Test Button, check to insure that the

Channel Selection Switches on both the Transmitter and Receiver are set to the same position. If during use you

encounter misfires, it may be due to interference from other electrical objects. Change your unit to a different

channel by selecting a different combination on the Receiver and Transmitter Channel Selection Switch.

3. Insert the transmitter Hot Shoe Foot (4) into the hot shoe on your camera. If your camera does not have a hot

shoe, you can connect the transmitter to your camera using the PC Synch Cord.

4. Plug the receiver into the synch cord port of your studio flash. Note: Depending on your studio flash, this may

require the use of the MINI PLUG ADAPTER (13).

5. Turn on the receiver and your flash. Press the Test Button on the transmitter to confirm operation.

Important Notes

•Be sure to use fresh batteries. Weak batteries will reduce the effective operating range of the trigger.

•Do not leave or store in temperatures that exceed 40ºC. This could adversely affect the internal structure or

performance of the unit. Remove the battery pack and store it separately if you do not intend to use the trigger

for a long period of time.

•This unit is not water-resistant. Rain and humid weather may cause irreparable damage.

•This unit is composed of very delicate electronic parts. Be sure to protect it against shock, impact or other

improper handling.

•Do not try to open the housing or repair the unit. There are no user serviceable parts and improper handling

could cause serious injury.

•Do not clean the surface of the light with any petroleum solvent, detergent solution or other strong solvents.

These solvents may cause damage to the light.

SPECIFICATIONS

• Transmitter Power Source: 12V 23A

• Receiver Power Source: AAA x2

• Outdoor operating distance (open area): >100 ft/30 m

• Indoor operating distance: > 32 ft/10 m

• Available Operating Channels: 8

• Operating Frequency: FM 2.4Ghz

• Maximum Synch Speed: 1/250th second depending on flash/camera combination

ONE YEAR UNCONDITIONAL GUARANTEE

If for any reason, this ProMaster product fails within ONE YEAR of the date of purchase, return this product to your

ProMaster dealer and it will be exchanged for you at no charge.

ProMaster products are guaranteed for ONE FULL YEAR against defects in workmanship and materials. If at any time

after one year, your ProMaster product fails under normal use, we invite you to return it to ProMaster for evaluation.

Code 9525

Made in China

www.promaster.com

Fairfield, CT 06825

Table des matières

Autres manuels pro master Accessoires pour appareils photo

pro master

pro master 3711 Manuel utilisateur

pro master

pro master Infrared Remote Shutter Release Manuel utilisateur

pro master

pro master 3690 Manuel utilisateur

pro master

pro master GH11 Manuel utilisateur

pro master

pro master SM300 Manuel utilisateur

pro master

pro master 9217 Manuel utilisateur

pro master

pro master US1014RGB Manuel utilisateur

pro master

pro master ST1 Manuel utilisateur

pro master

pro master Video Tripod 24P Manuel utilisateur

pro master

pro master 3648 Manuel utilisateur

pro master

pro master Specialist Series Manuel utilisateur

pro master

pro master 3655 Manuel utilisateur

pro master

pro master Wireless Remote Shutter Manuel utilisateur

pro master

pro master VL306 Manuel utilisateur

pro master

pro master SystemPro Professional Manuel utilisateur

pro master

pro master CT75K Manuel utilisateur

pro master

pro master CHRONICLE Manuel utilisateur

pro master

pro master 3669 Manuel utilisateur

pro master

pro master LED80VT Manuel utilisateur

pro master

pro master GH25K Manuel utilisateur

pro master

pro master AI428C Manuel utilisateur

pro master

pro master 3662 Manuel utilisateur

pro master

pro master LED30 Manuel utilisateur

pro master

pro master SystemPRO ProfessionalRemote + Shutter... Manuel utilisateur

Manuels Accessoires pour appareils photo populaires d'autres marques

Viltrox

Viltrox EF-NEX Instructions d'installation

Calumet

Calumet 7100 Series CK7114 Manuel utilisateur

Ropox

Ropox 4Single Series Manuel utilisateur

Cambo

Cambo Wide DS Digital Series Mode d'emploi

Samsung

Samsung SHG-120 Manuel utilisateur

Ryobi

Ryobi BPL-1820 Manuel d'utilisation

Aegis

Aegis ABL-36020P Manuel utilisateur

Pentax

Pentax Data Back Fc Manuel utilisateur

Fantasea

Fantasea EyeGrabber F Series Manuel utilisateur

Honeywell

Honeywell HDZ20HD Manuel utilisateur

EGO

EGO BA1400T Manuel utilisateur

Sima

Sima SRW-62 Manuel utilisateur

Shape

Shape A7SSMKIT Manuel utilisateur

Slide Kamera

Slide Kamera HST-2 Manuel utilisateur

Power works

Power works 2902613 Manuel utilisateur

SES

SES SE-2047-2 Manuel utilisateur

Olympus

Olympus PT-EP05L Manuel utilisateur

Starlite

Starlite OctoDome nxt Manuel utilisateur

pro master COMPACT STUDIO FLASH TRIGGER Manuel utilisateur

Manuels Accessoires pour appareils photo populaires d'autres marques