Slotted Hex Washer Head Screw
WMHS - WMHS-WB ASSY Instructions : 0.004
Slotted Hex Washer Head Screw
Add the Slotted Hex Washer Head Screws to upper flat bar
(3 per either side of WMHS is recommended)
Temporarily plug in WMHS and raise the mechanism to
access upper flat bar slots
Be sure previous steps are completed and WMHS is
securely fastened to wall prior to operation
Be sure WMHS is securely fastened to wall by tightening all
Slotted Hex Washer Head Screw
Lower mechanism back to lowest position and unplug
before continuing to next step
Slotted Hex Washer Head Screw
Add the Slotted Hex Washer Head Screws to lower flat bar
(2 per either side of WMHS is recommended)
MUST fasten Slotted Hex Washer Head Screws
through the hole on the flat bar to prevent sliding
Be sure WMHS is securely fastened to wall by tightening
all Slotted Hex Washer Head Screws
Hang the WMHS on the two
Slotted Hex Washer Head Screw
4
COPYRIGHT 2017
www.proliftstand.comwww.joromfg.com
