Pro-face PL-B910 Series Manuel utilisateur

When printing out this PDF manual, since the printer setting can effect the

quality of the printout, be sure your printer’s quality setting is set to “High”.

BOX-Type Industrial Computer

PL-B910 Series

User Manual

1PL-B910 Series User Manual

Introduction

Thank you for purchasing Proface’s PL-B910 series Box Type Industrial Com-

puter, hereafter referred to as "the PL". This unit embodies Proface’s latest, cost-

effective architecture and is designed for Industrial Automation users.

Prior to using your PL, be sure to read this manual thoroughly to familiarize

yourself with the unit's operation procedures and functions.

MS-DOS®, Windows®95, Windows®98 Second Edition and Windows NT®are

registered trademarks of the Microsoft Corporation.

IBM®, and DOS®are registered trademarks of IBM.

1. It is forbidden to copy the contents of this manual in whole, or in part, without

the permission of the Digital Electronics Corporation.

2. The information in this manual is subject to change without notice.

3. This manual was written with care; however, if you should find any errors or

omissions, please contact Digital and inform them of your findings.

4) Please be aware that Digital Electronics Corporation shall not be held liable by

the user for any damages, losses, or third party claims arising from the uses of

this product.

NOTE:

Product names used in this manual are the trademarks of their respective manufacturers.

Preface

2PL-B910 Series User Manual

This manual includes the following cautions concerning procedures that must be

followed to operate the PL correctly and safely. Prior to operating the PL, be sure to

read this manual and any related materials thoroughly to understand the correct opera-

tion and functions of this unit.

Safety Icons

To allow you to use the PL correctly, throughout this manual, the following icons

are provided next to operations requiring special attention. These icons are used to

describe the following situations:

Indicates situations where severe bodily

injury, death or major equipment damage

may occur.

Indicates situations where slight bodily

injury or machine damage can occur.

Caution

Warning

Essential Safety Precautions

• To avoid the possiblity of an electric shock, be sure to con-

nect the power cord to the PL before connecting it to the

main power supply.

• A fire or electrical shock may occur if voltages used with

the PL are beyond the specified range. Be sure to use only

the specified voltage.

• Before opening the PL’s protective cover, be sure to turn

the unit’s power OFF. This is because the PL’s internal

parts carry high voltages.

• To avoid fires or electrical hazards, do not modify the PL in

any way.

•If metal particles, water or other types of liquids contact

any of the PL’s internal parts, immediately turn the unit’s

power OFF, unplug the power cord, and contact either

your PL distributor or the Digital Electronics Corporation.

•Read and understand Chapter 4 “Installation and Wiring”

thoroughly in order to select an appropriate installation

location for the PL.

•Before either plugging in or unplugging a board or inter-

face connector, be sure to turn the PL’s power OFF.

WARNINGS

3PL-B910 Series User Manual

Preface

WARNINGS

•To prevent a possible explosion, do not install the PL in

areas containing flammable gases.

•The PL is not appropriate for use with aircraft control

devices, aerospace equipment, central trunk data trans-

mission (communication) devices, nuclear power control

devices, or medical life support equipment, due to these

devices’ inherent requirements of extremely high levels of

safety and reliability.

•When using the PL with transportation vehicles (trains,

cars and ships), disaster and crime prevention devices,

various types of safety equipment, non-life support re-

lated medical devices, etc. redundant and/or failsafe sys-

tem designs should be used to ensure the proper degree

of reliability and safety.

Preface

4PL-B910 Series User Manual

CAUTIONS

•Avoid exposing the PL to, or operating the PL in direct

sunlight, high temperatures and humidity, and in areas

where excessive dust and vibration will occur.

•Avoid using the PL in areas where sudden, extreme

changes in temperature can occur. This may cause con-

densation to form inside the unit, possibly leading to an

accident.

•To prevent the PL from overheating, be sure its air circula-

tion vents are clear and clean, and keep the unit’s opera-

tion area well-ventilated.

•Avoid operating or storing the PL near chemicals, or

where chemicals can come into contact with the unit.

•When the Standard display is connected to the PL, after

turning the display OFF, be sure to wait at least three (3)

seconds before turning it ON again.

When PL Hard Disk (HDD) data is lost:

•The Digital Electronics Corporation cannot be held re-

sponsible or provide any compensation for damage(s)

caused by the loss of data stored in the PL’s hard disk

drive (HDD). It is therefore strongly suggested that all

important data and software be backed up regularly to an

external data backup device.

•Please be aware that the Digital Electronics Corporation

bears no responsibility for any damages resulting from

the customer’s application of this unit’s hardware or soft-

ware.

• Since the PL unit’s hard disk drive (HDD) is a consum-

able item, i.e. it has a limited lifetime, be sure to back up

its data regularly and prepare a spare HDD unit.

•To prevent file data damage, be sure to shut down the

PL’s OS before turning OFF the main power.

•After turning OFF the PL's power, wait until the internal

HDD stops spinning before turning on the power again

(approx. 5 seconds).

• When the PL unit's standard display is connected to the

PL using the USB cable, wait three (3) seconds before

turning the power ON again.

5PL-B910 Series User Manual

Preface

Table of Contents

Introduction.....................................................................................................1

Essential Safety Precautions ......................................................................2

Table of Contents...........................................................................................5

Documentation Conventions.......................................................................8

PL Series Model Numbers............................................................................8

Package Contents..........................................................................................9

Special Features...........................................................................................10

UL/c-UL(CSA) Application Notes..............................................................11

CE Marking Notes ........................................................................................11

CHAPTER 1 PL BASICS

1.1 Prior to Operating the PL .............................................................................1-1

1.1.1 Touch Panel Connection................................................................1-3

1.1.2 Connecting the Dual Displays ...................................................... 1-4

1.2 PL System Configuration ......................................................................... 1-6

1.3 Optional Items............................................................................................1-7

CHAPTER 2 SPECIFICATIONS

2.1 General Specifications...............................................................................2-1

2.1.1 Electrical ........................................................................................2-1

2.1.2 Structural ........................................................................................2-1

2.1.3 Environmental................................................................................2-2

2.2 Functional Specifications..........................................................................2-3

2.2.1 General ...........................................................................................2-3

2.2.2 Expansion Slots ............................................................................. 2-4

2.2.3 Clock (RTC) Accuracy .................................................................. 2-4

2.3 Interface Specifications.............................................................................2-5

2.3.1 Keyboard Interface ........................................................................ 2-5

2.3.2 Mouse Interface .............................................................................2-5

2.3.3 CRT Interface................................................................................ 2-5

2.3.4 RS-232C Interface (COM1/COM2/COM3)................................2-6

2.3.5 Printer Interface (LPT1) ............................................................... 2-6

2.3.6 RAS Interface................................................................................ 2-7

2.3.7 USB Interface (USB)....................................................................2-8

Preface

6PL-B910 Series User Manual

2.4 PL Part Names and Features ................................................................... 2-9

2.5 PL External Dimensions .........................................................................2-12

2.5.1 PL-B900/B910 Series External Dimensions..............................2-12

2.5.2 Installation Fasteners...................................................................2-14

2.5.3 Full-Sized Cover/Mirror Disk Unit Attachment Dimensions...2-16

CHAPTER 3 INSTALLING OPTIONAL UNITS AND EXPANSION BOARDS

3.1 Installation ..................................................................................................3-1

3.1.1 Removing the Rear Maintenance Cover ......................................3-2

3.1.2 Installing the DIM Module (PL-EM220 / PL-EM230) ...............3-4

3.1.3 Installing the FDD Unit (PL-FD200) ...........................................3-5

3.1.4 Installing the FDD Unit (PL-FD210) ...........................................3-6

3.1.5 Removing/ Installing the HDD Unit (PL-HD220) ...................... 3-8

3.1.6 Installing an Expansion Board.....................................................3- 9

3.1.7 Connecting the CD-ROM Unit (PL-DK200).............................3-10

3.1.8 Attaching the Display Expansion Board (PL-PE200)............... 3-11

3.1.9 Connecting the Standard Display (DU-6900/DU-7900)...........3-12

3.1.10 Connecting an Analog RGB Monitor.........................................3-13

3.1.11 Removing the Cooling Fan Unit..................................................3-5

CHAPTER 4 INSTALLATION AND WIRING

4.1 Installation Cautions .................................................................................4-1

4.2 Installing the PL......................................................................................... 4-3

4.2.1 Installation Procedures .................................................................. 4-3

4.3 Wiring the PL ............................................................................................. 4-4

4.3.1 Connecting the Power Cord .......................................................... 4-4

4.3.2 Power Supply Cautions ................................................................. 4-6

4.3.3 Grounding Cautions....................................................................... 4-7

4.3.4 Cautions When Connecting I/O Signal Lines.............................. 4-7

CHAPTER 5 SYSTEM SETUP

5.1 Setup Procedures........................................................................................5-1

5.2 System Parameters.....................................................................................5-2

5.2.1 STANDARD CMOS SETUP ........................................................ 5-2

5.2.2 BIOS FEATURES SETUP ............................................................ 5-4

5.2.3 CHIPSET FEATURES SETUP..................................................... 5-6

5.2.4 POWER MANAGEMENT SETUP.............................................. 5-8

5.2.5 PNP/PCI CONFIGURATION SETUP .......................................5-10

5.2.6 LOAD BIOS DEFAULTS ............................................................5- 2

7PL-B910 Series User Manual

Preface

5.2.7 LOAD SETUP DEFAULTS ........................................................5-12

5.2.8 SYSTEM MONITOR UTILITY .................................................5-12

5.2.9 INTEGRATED PERIPHERALS.................................................5-14

5.2.10 IDE HDD AUTO DETECTION .................................................5-17

CHAPTER 6 OS SETUP

6.1 Setting Up Your PL OS .............................................................................6-1

6.1.1 Touch Panel Device Driver Settings ............................................6-2

CHAPTER 7 MAINTENANCE AND INSPECTION

7.1 Cleaning the Filter .......................................................................................7-1

7.2 Periodic Maintenance Points....................................................................7-3

APPENDICES

A.1 Hardware Configuration ..........................................................................6-1

A.1.1 I/O Map .......................................................................................... 6-1

A.1.2 Memory Map.................................................................................. 6-2

A.1.3 Interrupt Map ................................................................................. 6-3

A.2 RAS Feature................................................................................................6-4

A.2.1 PL's RAS Features ......................................................................... 6-4

A.2.2 RAS Feature Details ...................................................................... 6-5

A.2.3 RAS Feature Overview ................................................................. 6-9

INDEX

Preface

8PL-B910 Series User Manual

Documentation Conventions

The list below describes the documentation conventions used in this manual.

PL Series Model Numbers

PL - B 9 * *- 4 *

A B C D E F G

Symbol Meaning

Indicatesimportantinformationorproceduresthatmustbe

followedforcorrectandrisk-freesoftware/device operation.

Providesusefulorimportantsupplementalinformation.

*1 Indicatesusefulorimportantsupplementalinformation.

Referstousefulorimportantsupplemental information

1) , 2) Indicatesstepsinaprocedure.Besure toperform thesestepsin

the ordergiven.

PL AbbreviationforthePL-B910SeriesBoxTypeIndustrial

Computers.

DU StandarddisplayunitforthePL-B910SeriesBoxTypeIndustrial

Computers.

*1 Refers to the number of available ISA Bus expansion slots.

Item Code Meaning

APL PLSeriesPanelComputer

BB “Box”typeindustrial computer

C9 PL-X900Seriesunit

0 PL-B910Seriesunit(Singledisplaytype)

1 PL-B910Seriesunit(Dualdisplaytype)

0 4-Slot type*1

1 2-Slot type *1

F4 CEMarking,UL/c-UL(CSA)Approval

G* PLunit’srevisionnumber

9PL-B910 Series User Manual

Preface

The PL's packing box contains the items listed below. Please check to confirm

that all items shown below have been included.

Package Contents

Be careful when

handling the PL

not to damage the

built-in HDD



Power Cord



PL Unit

PL-B900 Series

PL-B910 Series

This cord is designed only for

AC100/115V use. Any other voltage

will require a different cord.



Floppy Disks (2)

(PL-B910 Series

USB Touch Panel

Control Utility Disks)



Floppy Disks (3)

(PLX900 Series

Driver and Utility

Disks)





Contains Box Type

Industrial Computer

PL-B910 Series

User Manual (This manual)



PL-B910 Series

Box Type Industrial

Computer Instruction

Guide

( English 1/Japanese 1 )

Instruction

Guide



Installation Brackets

(2 brackets - left and right)

(6 attachment screws)

CD-ROM (1)

Your PL unit package will also contain an Installation Guide for your built-in HDD unit.

Be sure to check that guide’s package contents.

If your PL contains a built-in HDD



Floppy Disks (3)

(PL-B910 Series

Driver and Utility

Disks)

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Pro-face PC industriel

Pro-face

Pro-face GP-4311HT Manuel utilisateur

Pro-face

Pro-face PS5000 Series Manuel utilisateur

Pro-face

Pro-face GP-4402WW Manuel utilisateur

Pro-face

Pro-face PS-3650A Series Manuel utilisateur

Pro-face

Pro-face PS3700A-T41-ASU-E66 Manuel utilisateur

Pro-face

Pro-face FP5000 Series Manuel utilisateur

Pro-face

Pro-face GP-477R Series Manuel utilisateur

Pro-face

Pro-face GP2500-TC11 Manuel utilisateur

Pro-face

Pro-face PS-4600 Series Manuel utilisateur

Pro-face

Pro-face PL-B910 Series Manuel utilisateur

Pro-face

Pro-face PS3700A-T41-ASU-P41 Manuel utilisateur

Pro-face

Pro-face GP2000 Series Manuel utilisateur

Pro-face

Pro-face PS400G-T41-E124V Manuel utilisateur

Manuels PC industriel populaires d'autres marques

Chipsee

Chipsee PPC-A72-101 Manuel utilisateur

Advantech

Advantech UNO-2184G Manuel utilisateur

MSI

MSI MS-9A76 Manuel utilisateur

Stackrack

Stackrack THOR200 Manuel utilisateur

Moxa Technologies

Moxa Technologies DA-682C Series Manuel utilisateur

Nodka

Nodka eBOX-3000-ETC Manuel utilisateur

Siemens

Siemens SIMATIC IPC627E Manuel utilisateur

MSI

MSI MS-9A89 Manuel utilisateur

Artila

Artila Matrix-516 Manuel utilisateur

Siemens

Siemens SIMATIC Rack PC 840 V2 Manuel utilisateur

Advantech

Advantech IPPC-6152A Manuel utilisateur

Beckhoff

Beckhoff CX9020 Manuel utilisateur

Dell

Dell Embedded Box PC 5000 Manuel utilisateur

IBASE Technology

IBASE Technology ASB200-918 Series Manuel utilisateur

Lenovo

Lenovo ThinkCentre M90q Manuel du propriétaire

IXXAT

IXXAT Econ 100 Manuel utilisateur

Kontron

Kontron KBox A-151-TGL Manuel utilisateur

AXIOMTEK

AXIOMTEK ICO500-518 Series Manuel utilisateur