Pro-4 Tactical Tactical Survival Set Manuel utilisateur
Flashlight with COB Lantern, 12 in 1 Pliers with Multi-Tool,
Portable Lantern, and Work Light
Tactical Survival Set
Portable Lantern
• Installing batteries
• On / O instructions
• Magnetic base
• Hanging hook / handles
• Built-In compass
Flashlight with COB Lantern
• Installing 3 AAA alkaline batteries
• Striker head
• Zoom In / Out
• Exposing lantern modes
• Turning On / O - Switching Modes
14+
AGES
QR CODE
Work Light
• Installing 4 AA batteries
• On / O Instructions, and
3 Light Modes
• Locking Handle
12 in 1 Pliers with Multi-Tool
• Pliers, tools and storage
• Nylon carry case
Designed, Imported,
and Distributed by:
Pro-4 Marketing LLC
32411 Industrial Drive
Madison Heights, MI 48071
Tel: 248-809-2129
Toll Free: 1-833-776-3687
www.Pro-4Tactical.com
Instruction Manual
INSTRUCTIONS
1
Use three magnets mounted on bottom of Lantern for easy,
hands-free magnetic adhesion on most ferrous (iron-based) metal
surfaces. Magnetic base works best on at surfaces
Retractable Hanging Hook on bottom of Lantern base
Retractable Handles on side of Lantern. Use to hang Lantern in ideal
locations for maximum light
FRESH ALKALINE BATTERIES ARE STRONGLY RECOMMENDED. DO NOT MIX OLD AND
NEW, OR DIFFERENT TYPES OF BATTERIES. DISPOSE OF BATTERIES PROPERLY.
Unscrew and remove battery cover on bottom of Lantern
Insert 3 AA batteries according to polarity (+/-), as
indicated on Lantern battery compartment
Replace and tighten battery cover
1
2
3
To turn Lantern ON, pull top of Lantern UP
from base until unit is fully extended
Adjust height of Lantern to
control amount of light emitted
To turn Lantern OFF, push top
of Lantern DOWN toward
base until unit is fully closed
123
1
1
2
2
300 LUMEN TACTICAL PORTABLE LANTERN
Installing 3 AA Alkaline Batteries
On / O Instructions
Magnetic Base
Retractable Hanging Hook and Handles
4
• The Built-In Compass at top of Lantern always points North (as shown.)
Compass Reading Tips
• Hold Lantern level. The needle
must be balanced properly for an
accurate directional reading.
• Read the correct direction; “N”
stands for “North.”
• Move to a dierent area if the
compass reading is unstable.
• Use common sense: e.g., know that
the sun rises in the East and sets
in the West.
300 LUMEN TACTICAL PORTABLE LANTERN
Built-In Compass
5
If the Lantern does not turn on, works intermittently, or has a weak light:
• Remove and replace batteries
• Be sure Lantern base is screwed on tightly,
and batteries are inserted properly in battery
compartment
Troubleshooting
• If problem persists, contact Pro-4 Tactical for
technical advice
• See www.Pro-4Tactical.com for Warranty, and
Replacement Information
Maintenance Warnings
• High Intensity Beam. Extremely bright 300 lumen light
• Do not shine directly into eyes; may cause vision damage
• Follow City Ordinance Guidelines for proper disposal of dry
cell batteries
• Recommended for Ages 14+. Keep out of reach of children
• Keep magnetic lantern base away from magnet-sensitive
products, medical devices, and pacemakers
• Lantern should be used for the intended purpose of providing
illumination only
• Remove and store batteries when not in use
for 90 days or longer
• Clean Lantern with a clean, dry cloth as
needed; dry after use
• Lubricate screw threads and moving parts
with standard consumer lubricant as needed
WARNING: This product can expose you to chemicals, including benzene and ethylbenzene, which are
known to the State of California to cause cancer. For more information, go to www.p65Warnings.ca.gov
FLASHLIGHT WITH COB LANTERN
2
Unscrew tail
cap. Remove
battery pack
Insert battery pack into
ashlight as shown
below. Replace tail cap
Insert 3 AAA batteries
according to polarity (+/-)
as indicated on battery pack
123
FRESH ALKALINE BATTERIES ARE STRONGLY RECOMMENDED. DO NOT MIX OLD AND NEW, OR DIFFERENT TYPES OF BATTERIES.
Exposing Lantern Modes
When using “COB Lantern” mode or “Red
Flashing” mode, extend the Flashlight
head to fully expose the COB Lantern.
Turning ON / OFF - Switching Modes
Installing 3 AAA Batteries
To turn ashlight ON / OFF, rmly press the
ON / OFF button. You will hear a “click,”
and the light will turn ON. Firmly press
again, and the ashlight will turn OFF.
Note: The next time the button is
pressed, the light will advance to the
next mode.
CLICK
To cycle through light modes (without
turning the ashlight o), press button in
halfway. The button will not click, and the
light will advance to the next mode.
5 LIGHT MODES:
High Power Light
COB Lantern
Low Power Light
Red Flashing
Strobe
1
2
3
4
5
FLASHLIGHT WITH COB LANTERN
3
• Remove and store batteries when not in use for 90
days or longer
• Clean Flashlight with a clean, dry cloth as needed;
dry after use
• Lubricate screw threads and moving parts with
standard consumer lubricant as needed
• High Intensity Beam. Extremely bright 300 lumen light
• Do not look directly into light; may cause vision damage
• Follow City Ordinance Guidelines for proper disposal of dry cell batteries
• Keep magnetic ashlight base away from products sensitive to magnets,
such as medical devices and pacemakers
• Flashlight should be used for the intended purpose of providing
illumination only
• Recommended for Ages 14+. Keep out of reach of children
• Remove and replace batteries
• Be sure tail cap is screwed on tightly, and batteries
are inserted properly in battery pack
• Be sure battery pack is properly inserted. If problem
persists, contact Pro-4 Tactical for technical advice
• See www.Pro-4Tactical.com for Warranty and
Replacement Information
Zoom In
For a long, narrow, focused light beam, push Flashlight
head to the front end of Flashlight, as shown
Zoom Out
For a broader light beam, push Flashlight head toward
the back end of the Flashlight, as shown
1
1
2
2
If the Flashlight does not turn on, works intermittently, or has a weak light:
WARNING: This product can expose you to chemicals, including benzene and ethylbenzene, which are known to
the State of California to cause cancer. For more information, go to www.p65Warnings.ca.gov
Striker Head surrounds the ashlight lens. It is capable of breaking or cracking ice, glass or similar items by forcefully
tapping the edge of striker head against the item you wish to break.
CAUTION:
Do not use on vehicle windshields, windows or any other surfaces you do not intend to break. Unintended
scratches can appear by accident. Wipe down the striker head with a wet or dry cloth after use to ensure debris is removed.
Striker Head
Zoom In / Out
Maintenance Warnings
Troubleshooting
WORK LIGHT
6
Slide cover door outward to open
battery cover door
Slide battery cover door back on
Insert 4 new AA batteries,
according to polarity (+/-)
12
3
NEW ALKALINE BATTERIES
RECOMMENDED
DO NOT MIX OLD BATTERIES
WITH NEW BATTERIES
Press switch on the back of light to turn it ON
First of 3 modes is High
Second of 3 modes is Low
Third of 3 modes is Strobe (fast blink)
Press switch a nal time to turn light OFF
1
2
3
4
5
Installing 4 AA Batteries
On / O Instructions, and 3 Light Modes
WORK LIGHT
7
• Remove and store batteries when not in use for 90 days or longer
• Clean work light with a clean, dry cloth as needed
• Lubricate screw threads and moving parts with standard consumer lubricant as needed
• High Intensity Beam. Extremely bright 400 lumen light
• Do not look directly into light; may cause vision damage
• Follow City Ordinance Guidelines for proper disposal of dry cell batteries
• Do not allow children to use this work light without adult supervision
• Work Light should be used for the intended purpose of providing illumination only
• Recommended for Ages 14+. Keep out of reach of children
• Remove and replace batteries
• Be sure battery compartment is closed
• Be sure batteries are properly inserted. If problem persists, contact Pro-4 Tactical for
technical advice
• See www.pro-4Tactical.com for Warranty & Replacement information
If the light does not turn on, works intermittently, or has a weak light:
Rotate up to 180° to desired position
The handle locks into position
Handle has 7 pre-locking positions
along the full 180° radius. Handle will
self-lock at all 7 positions
1
2
180°
Locking Handle
Maintenance
Warnings
Troubleshooting
WARNING: This product can expose you to chemicals, including benzene and ethylbenzene, which are known to
the State of California to cause cancer. For more information, go to www.p65Warnings.ca.gov
Pliers, Tools, and Storage
12 IN 1 PLIERS WITH MULTI-TOOL
Stainless steel construction
contains multiple foldaway
tools in Plier handles. Remove
12-In-1 Multi-Tool from Nylon
Carry Case. Unfold handles.
Pliers and Wire Cutter/Stripper
are now usable
To use all other tools, unfold desired
tool from Pliers handle.
TOOLS INCLUDE:
Long nose pliers
Standard pliers
Wire cutter / stripper
Flat head screwdriver (large)
Metal / wood le
Sharp knife (small)
Flat head screwdriver (medium)
Saw
Sharp knife (large)
Phillips head screwdriver
Flat head screwdriver (small)
Bottle and can opener
1
2
3
4
5
6
7
8
9
10
11
12
1
2
3
5
11
12
9
10
6
7
8
4
8
12 IN 1 PLIERS WITH MULTI-TOOL
9
Durable nylon
construction.
Velcro fastener
secures 12-In-1
Multi-Tool in
Carry Case.
• Clean 12-In-1 Multi-Tool with
a clean, dry cloth as needed;
dry after use
• Lubricate moving parts with
standard consumer lubricant
as needed
• Use a standard consumer knife
sharpener to sharpen knives
as necessary
• Knife blades are designed to be extremely
sharp. Blades are made for cutting only
• Do not use this item as a pry bar, chisel,
or punch
• Knives and other tools are very sharp; use
caution with these and all sharp-bladed objects
• Use all tools for intended purposes ONLY
• Recommended for Ages 14+
Maintenance Warnings
Nylon Carry Case
• Tools stored in handle may be
too sti or loose for your specic
use. Adjust tool tension using Set
Screws at base of 12-In-1
Multi-Tool, as illustrated
• See www.Pro-4Tactical.com for
Warranty and Replacement Information
Troubleshooting
WARNING: This product can expose you to chemicals, including benzene and ethylbenzene, which are
known to the State of California to cause cancer. For more information, go to www.p65Warnings.ca.gov
No Questions Asked!
1YearWarranty
Tactical Survival Set
10
Send Warranty Slip To: Pro-4 Marketing 32411 Industrial Drive, Madison Heights, MI 48071
Register your unit online: www.Pro-4Tactical.com/warranty-registration.
Pro-4 Tactical will repair or replace your non-working unit FREE of charge
within One Year of Purchase. In order to register your Pro-4 Tactical product
and be eligible for coverage under our 1-Year, No Questions Asked Warranty,
please complete the product registration by mail or on our website.
Once you have registered you can make a claim to have your Pro-4 Tactical
item replaced. In order to do this, you will need to send in the following: Proof
of Purchase (store receipt); your contact information; a description of the problem;
your non-working product.
NOTE: You MUST register your product before requesting service. Registra-
tion must take place within 2 weeks of purchase. You may also complete and
send with the above items (within 2 weeks of purchase). If you do not have a store
receipt, please indicate where and when you purchased your product.
- OR -
Autres manuels pour Tactical Survival Set
1
Table des matières
Autres manuels Pro-4 Tactical Lampe de poche
Pro-4 Tactical
Pro-4 Tactical Wide Beam COB Manuel utilisateur
Pro-4 Tactical
Pro-4 Tactical Tac-Pen Manuel utilisateur
Pro-4 Tactical
Pro-4 Tactical Tactical Survival Set Manuel utilisateur
Pro-4 Tactical
Pro-4 Tactical Flashlight with Multi-Tool Manuel utilisateur
Pro-4 Tactical
Pro-4 Tactical PRO-1800 Manuel utilisateur
Pro-4 Tactical
Pro-4 Tactical Mega Tac-Light Manuel utilisateur
Pro-4 Tactical
Pro-4 Tactical Flashlight with Multi-Tool Manuel utilisateur
Pro-4 Tactical
Pro-4 Tactical Mega Tac-Light Manuel utilisateur
Pro-4 Tactical
Pro-4 Tactical Large Baseball Bat Manuel utilisateur
Pro-4 Tactical
Pro-4 Tactical PRO-700 Manuel utilisateur
