3
DESCRIPTION
Prity pellet fireplaces with hot air convection are designed to meet your
requirements for comfort and uniform heating of your home. They function as a solid
fuel appliance, connected to a dedicated chimney for disposal of flue gases.
It is suitable for one room or two adjacent rooms, if air-exchange between them
is possible.
The room fan integrated in the fireplace’s body has low noise level and 3 selectable
modes of operation.
Connection to the chimney and the initial start-up shall be performed by licensed
specialists and capable for tort liability people in charge upon observation of all local,
national and European standards for provision of safety, functionality, convenience
and aesthetics.
Unlike the ordinary solid fuel appliances, pellet fireplaces can work in a continuous
automatic mode of fuel supply, which is the reason when choosing the model not to
resort to higher capacity appliance to cover potential heat losses.
Sometimes during the start-up a customized setting of the proportion of the fuel
and oxygen demand is necessary and it depends on the pellets’ quality, chimney
draught and the access to air.
Delivery and unpacking
The pellet fireplace is shipped by the manufacturer installed onto a wooden grate,
packed with stretch wrap and cardboard. Upon purchase, please, inspect the product
exterior for any visible damage due to transportation. Verify the integrity of the
panoramic glass, door seals and its proper closing with the door handle.
All pellet appliances “Prity” have been tested and set-up under laboratory
conditions, which is the reason for any potential presence of traces of combustion
process and pellets.
The firebox will contain:
- supply cable ………………………….
- firepot …………………………….…..
- ash pan ………………………………………
- warranty card ……………………….
Operating principle
Using the dosing device comprising gear motor and auger pellets from the hopper
are loaded via the chute into the firepot, made of heat-resistant alloy steel, where they
are burned in a quantity specified by a recipe, corresponding to the heating capacity
selected.
Upon start-up, the initially loaded pellets are warmed and kindled automatically
using hot air from the electrical heating coil – igniter, which upon detection of a stable
combustion process is automatically switched off.
