PrioVino Classic Manuel utilisateur

PrioVino Classic

Operating Instructions

Status: December 2018

First edition December 2018 / © PrioVino GmbH

Reprint – even in extracts – only upon written

permission by PrioVino GmbH (ISO 16016).

Contents

1. General information

1.1 Information about these operating instructions

1.2 Safety warnings

1.3 Limitation of liability

2. Safety

2.1 Proper use

2.2 General safety instructions

2.3 Safety instructions for power supply, battery

and battery charger

3. Before use

3.1 Unpacking the device

3.2 Parts and accessories included

3.3 Names of working parts

3.4 Correct placement of the device

3.5 Checking electrical connections

3.6 Charging the battery (only applicable for the

battery-operated version)

4. Set-up and operation

4.1 Operation on mains power

4.2 Operation on battery

4.3 Setting the desired temperature

5. Cleaning instructions

6. Storage

7. Service and maintenance

8. Disposal

9. Technical information

10. Declaration of conformity

The reproduction, distribution and utilization of this document as well as the

communication of its contents to others without express authorization is prohibited.

event of the grant of a patent, utility model or design.

– Refer to protection notice ISO 16016 –

1. General Information

1.1 Information about these operating instructions

These are the operating instructions for the wine cooler PrioVino Classic

(hereafter referred to as the device). It provides important information for

the safe operation of the device and must be carefully studied by anyone

who sets up, operates or cleans it. Non-compliance with the instructions

laid out in this manual can lead to injuries to the user and/or damage to

the product. Please keep the user manual at a safe and easily accessible

location at the operation site of the device.

You can download the operating instructions from our website at

www.priovino.com/downloads, where it is also available in additional languages.

Content and technical specications are subject to change without notice.

1.2 Safety warnings

indicates a warning about situations that could lead to serious injury

or constitute a re hazard.

indicates a warning about situations that could be hazardous

to the user or cause product damage.

1.3 Limitation of liability

The information, facts and gures, diagrams and technical instructions

contained in these operating instructions were compiled with the utmost

care in order to make the set-up, operation and cleaning of this device safe

and easy. Illustrations may be exemplary.

The manufacturer assumes no liability for damage or injury caused by

non-compliance with the instructions in these operating instructions as well

as for any damage caused due to improper repairs, technical modications

to the device or the use of third-party spare parts.

All translations of these operating instructions were carried out by

professional translators. The manufacturer assumes no liability for damage

or injury caused by incorrect translations. If in doubt, please refer to the

original operating instructions.

– Refer to protection notice ISO 16016 –

2. Safety

This device complies with all statutory safety regulations. However,

the improper use of the device may lead to injuries, material damage or

damage to the product.

2.1 Proper use

Use the device only for the intended purpose. Improper use or

non-compliance with these operating instructions can have very

dangerous consequences.

2.1.1 Personnel requirements

The device may only be operated by authorized personnel, qualied under

local regulations, and duly instructed and trained by the owner of the device.

The owner of the device is obliged to inform the operating personnel about

changes to the device and to train them if necessary.

2.1.2 Intended scope of operation

The device is only intended to maintain the temperature of pre-cooled wine

bottles with a diameter of not more than 9.4 cm and is designed mainly for

commercial use. The intended temperature range for the bottle is 5°C – 20°C.

The device may only be operated in technically awless condition and in

a proper, safety-conscious and risk-conscious manner in accordance with

the operating instructions! Immediate attention is particularly important

where malfunctions pose a safety risk! Proper use includes close adherence

to the operating instructions as well as compliance with the maintenance

regulations and schedules.

The device is designed for the environmental conditions described in

section 9 “Technical information“.

Modications to the device require written approval by PrioVino GmbH.

Any retrotting of the device must be carried out and tested by

PrioVino GmbH prior to use.

– Refer to protection notice ISO 16016 –

2.1.3 Unauthorized area of operation – foreseeable misuse

A dierent use or a use that exceeds the intended scope of operation

described in 2.1.2 is considered improper. PrioVino GmbH is not liable

for any resulting damage. The risk is solely borne by the operator.

The device is not designed to cool down or heat up wine bottles.

In particular, it is not permitted to misuse the device e.g. as a shelf, coat

stand or standing aid. It is also not allowed to introduce liquid into the

bottle opening – even for cleaning purposes.

2.2 General safety instructions

• Inspect the device before use and do not switch it on if there is

any visible external damage.

• Children may not operate or be left unattended with the device.

• Injuries could result from the falling or toppling over of the cooler

or its stand.

• The device may only be operated by persons with mental,

physical or sensory impairments if they have been instructed about

the safe operation of the device as well as possible dangers or

if they are supervised.

2.3 Safety instructions for power supply, battery and battery charger

Depending on which version of the device is used, it can be operated on

a battery or on mains power.

Please observe the following safety instructions in order to avoid

dangerous situations:

• Do NOT touch the battery charger or any of the plugs or electrical

connections with wet hands.

• If you notice any damage to the plugs or connecting cables,

do NOT switch on the device, and contact our service department

immediately so that the damaged part can be repaired or replaced.

• Do NOT open the device, as parts in the interior of the device

could be current-carrying. Changing the electrical or mechanical

design of the device can result in severe electric shocks or

device malfunctions.

– Refer to protection notice ISO 16016 –

• Do NOT submerge the device in water or any other uid.

• The device is NOT dishwasher safe.

• Please ensure that the air vents are always free of any blockages.

Do not cover the air vents because this may cause the build-up

of heat and create a re hazard.

• Do NOT insert any objects into the air vents. Contact with current-

carrying parts in the interior of the device will lead to electric shock.

3. Before use

3.1 Unpacking the device

• Take the device out of the outer carton and remove all accessories

from the packaging material.

• Packaging material is not a toy. Please do NOT allow children to play

with packaging materials in order to avoid the danger of suocation.

• After unpacking, please check that the delivery is complete and without any

visible damage. Please contact us immediately if you receive an incomplete

or damaged delivery.

• Keep the outer carton and packaging materials in a safe place so that

you can return the product to us in its original packaging, should this ever

become necessary.

3.2 Parts and accessories included

• Cooler

• Power supply

• Battery charger (if applicable)

– Refer to protection notice ISO 16016 –

3.3 Names of working parts

handles

bottle chamber

Cooler

air vents

LED low battery alert

User interface

on/o

button

temperature

display

set button plus/minus buttons

to set temperature

– Refer to protection notice ISO 16016 –

Battery charger

Power supply

charger plug

operating plug

power cord with C8 plug

at one end and the electrical

plug on the other

power cord with C13 plug

at one end and the electrical

plug on the other

socket for

C8 plug

socket for

C13 plug

– Refer to protection notice ISO 16016 –

3.4 Correct placement of the device

• Ensure that the device is placed on a rm, even and perfectly

horizontal surface with sucient load-bearing capacity.

• Do NOT place the device in a damp or wet environment, or close

to open replaces or hearths.

• Make sure that the power supply/battery charger is not covered

and ensure that there is enough space between the power

supply/battery charger and other objects. If heat is allowed to

build up around the power supply/battery charger, it could result

in a re hazard.

We would be happy to provide consultation about the correct placement

of the device on ships, aircraft, or other non-stationary surfaces. Please

3.5 Checking electrical connections

Before you connect the device to a mains power source, compare the

voltage and frequency of the power supply/battery charger with that of the

power source. In order to prevent damage or malfunctioning of the product,

these values must match. The type plate on the power supply/battery

charger displays the relevant specications.

In addition, please note the following:

• The electrical outlet to which the power supply/battery charger is

connected must be protected by a circuit breaker (minimum 10 A).

• The device may only be connected to a mains power source with the

power cord included in your delivery. Do NOT plug the device into a

multiple power outlet or power strip as this can lead to a re hazard due

to overload.

• Ensure that the power cord does not lie over or under a hot or sharp-

edged surface.

3.6 Charging the battery (only applicable for the battery-operated version)

The battery should be fully charged before you rst switch on the device.

The battery should only be charged with the battery charger supplied with

the device.

• To charge the battery, insert the charger plug of the battery charger into

the socket underneath the cooler.

• Use the power cord to connect the battery charger to the electrical outlet.

This will cause the lower LED to light up in red.

– Refer to protection notice ISO 16016 –

• The upper green LED will ash while the battery is charging and

stop ashing once charging is complete.

• Disconnect the battery charger from mains power.

• Disconnect the battery charger from the cooler.

• If the upper LED lights up red or begins to ash in red, this is an

indication of a malfunction. Discontinue the charging process

immediately by removing the power plug from the electrical outlet

and then contact our service department.

4. Set-up and operation

This device can be run on mains power or depending on the model,

it can also be powered by a rechargeable battery.

4.1 Operation on mains power

• Connect the power supply/battery charger to the cooler by plugging in the

operation plug/charger plug in the socket on the underside of the cooler.

• Connect the power cord/charger cable to the power supply/battery

charger using the C13/C8 plug.

• Connect the power supply/battery charger to the electrical outlet using

the power plug.

4.2 Operation on battery

• Once the battery has been fully charged, the device is ready to be

switched on.

• When the battery is down to about 15% of full capacity, a blue LED lights

up behind the air vents. This low battery alert is a reminder to charge the

battery by plugging the device into mains power.

Turn the device o when it is not in use to avoid unnecessary power

consumption or battery drain.

4.3 Setting the desired temperature

• To switch the device on, press the on/o button until the blue

temperature display lights up.

• To set the desired temperature, rst press the set button. The display will

begin to ash.

• Use the plus/minus buttons to set the temperature you require.

– Refer to protection notice ISO 16016 –

Autres manuels pour Classic

Table des matières

Autres manuels PrioVino Refroidisseur de vin

PrioVino

PrioVino Premier Manuel utilisateur

Manuels Refroidisseur de vin populaires d'autres marques

U-Line

U-Line Echelon Wine Captain 2075WC Manuel du propriétaire

Haier

Haier WS50GA Manuel utilisateur

Cavist

Cavist 62 Manuel utilisateur

Kenmore

Kenmore 461.99130 Manuel utilisateur

Miele

Miele KWT 6422 iG Manuel utilisateur

Danby

Danby DWC113BLSDB Manuel utilisateur

Caple

Caple Wi6128 Manuel utilisateur

Avanti

Avanti WC1001 Manuel utilisateur

Frigidaire

Frigidaire FFWC38F6LS Manuel utilisateur

Titan

Titan TT-W2454SZ Manuel d'installation

Klarstein

Klarstein Botella 166 Uno Manuel utilisateur

Costway

Costway FP10130WL Manuel utilisateur

Lemair

Lemair LWC59 Manuel utilisateur

Haier

Haier JC-125GEA Manuel utilisateur

Caple

Caple WCi46B Manuel utilisateur

Climadiff

Climadiff CLI24 Guide rapide

Viking

Viking VCWB301LSS Manuel utilisateur

Caple

Caple WC6511 Manuel utilisateur