Primos 63163WM Manuel utilisateur
03-17Model #: 63163WM
Instruction Manual
Primos63163WM_14MPBulletProof2Cam_WalmartSMU_1LIM.indd 1 3/8/17 10:32 AM
Primos63163WM_14MPBulletProof2Cam_WalmartSMU_1LIM.indd 2 3/8/17 10:32 AM
3
CLEANING CAMERA: Do not use window or any chemical cleaner to clean any part of the
camera. Only use a water dampened cloth and wipe gently.
DO NOT COVER UP LIGHT SENSOR ON THE FRONT OF THE CAMERA HOUSING (see pg. 8). This
light detects light conditions for camera exposure.
The PIR/Battery Indicator LED (pg. 8) lights to verify triggers (PIR sensor activity)
during rst 10 seconds after power/mode switch is move to PIC or MOV, and lights when
capturing a photo or video during rst 3 minutes of operation. At 3 minutes after power
on, the camera will no longer illuminate this LED for ultimate stealth during operation.
The PIR/Battery Indicator LED will blink if battery power drops to a low level.
IMPORTANT
For your protection, please carefully read these warnings, precautions and safety/operating
instructions completely before operating this product. Follow these instructions closely and keep
this manual for future reference.
WARNING
To reduce the risk of re, electrical shock or product damage/failure:
• Do not expose unit with the battery door open to rain, moisture, dripping or splashing. Do not
open or close the battery door with wet hand. Completely wipe o water on unit and door
before opening.
• Do not lay product on moist ground or submerge in water (this unit is designed for upright
outdoor use). - DO NOT OPEN CASE HOUSING. UNINSULATED, ‘DANGEROUS VOLTAGE’WITHIN
PRODUCTS ENCLOSURE. DO NOT REMOVE HOUSING COVER.THERE ARE NO USER - SERVICEABLE
PARTS INSIDE, REFER SERVICING TO PRIMOS® CUSTOMER SERVICE.
• Only use batteries as specied in this user manual and install according to correct polarization.
Failure to follow may result in leaking or exploding batteries, damage to product, re or
personal injury. Do not handle damaged or leaking batteries.
• Do not expose to extreme heat. Do not leave product and/or batteries exposed in direct
sunlight inside a vehicle, or other contained environment for a long period of time.
• Only use accessories as recommended in this manual
Primos63163WM_14MPBulletProof2Cam_WalmartSMU_1LIM.indd 3 3/8/17 10:32 AM
4
CARE & CAUTION
• Transport and handle with care. Do not strongly shake, bump, hit, drop or otherwise cause
impact to the product – can result in product malfunction or damage to key components.
Additionally, damage to the case could result in imperfections to water-resistant properties.
• Take extra care when handling or using product in places with sand and dust. Sand, dust
and foreign substances exposed to product, especially in extreme proportions, may result in
poor speaker quality, damage to the external jacks or internal components and could cause
malfunction of the product. If exposed to any of these elements, please carefully wipe o
completely before continued use.
MODIFICATION WARNING
You are cautioned that any changes or modications not expressly approved in this manual could
void your warranty of this equipment.
OPERATING TEMPERATURE
• Recommended storage temperature range -10°F to 140°F (-20°C to +60°C)
• Recommended operating temperature range -5°F to 140°F (-25°C to +60°C)
WARNING
To avoid possible product damage and/or injury, NEVER INSTALL DIFFERENT TYPES OF BATTERIES in
the product at the same time. Failure to follow may result in leaking or exploding batteries, damage
to product, re or personal injury. Do not handle damaged or leaking batteries.
QUESTIONS??
Feel free to contact Primos® Customer Service Team
via phone: (601) 879-9323
with any comments, questions, problems or return requests.
Primos63163WM_14MPBulletProof2Cam_WalmartSMU_1LIM.indd 4 3/8/17 10:32 AM
5
Page Index
Introduction 7
Parts & Controls Guide 8-9
Battery and SD Card Installation 10
Date & Time Imprint Feature 11-13
Power On 13
Set Up 14-15
Viewing the Photos 15
Glossary 16
Technical Specications 17
Troubleshooting/FAQ 18-20
Warranty 21
Primos63163WM_14MPBulletProof2Cam_WalmartSMU_1LIM.indd 5 3/8/17 10:32 AM
6
IMPORTANT NOTE
Congratulations on your purchase of one of the best Game Cameras on
the market! Primos is very proud of this camera and we are sure you will
be pleased with yours as well. We appreciate your business and want to
earn your trust. Please refer to the notes below and the instructions in
this manual to ensure that you are completely satised with this product.
If your Primos BULLET PROOF 2 Game Camera does not seem to be
functioning properly or if you are having photo/video quality issues,
please check the Troubleshooting/FAQ section on pages 18-20.
Problems are often due to something simple that was overlooked, or
require only changing one setting to solve.
If your problem continues after trying the solutions in the
Troubleshooting/FAQ section, please contact Primos Customer Service
Primos recommends using 4 Energizer® Lithium AA batteries in this
BULLET PROOF 2 Game Camera to obtain maximum battery life.
Do Not Mix Old and New Batteries
Do not mix battery types-use ALL lithium or ALL alkaline.
Rechargeable batteries are not recommended.
Primos recommends using SanDisk® SD and SDHC Cards
(up to 32GB capacity) in this BULLET PROOF 2 Game Camera.
Primos63163WM_14MPBulletProof2Cam_WalmartSMU_1LIM.indd 6 3/8/17 10:32 AM
7
INTRODUCTION
Congratulations on your purchase of a Primos BULLET PROOF 2 Game
Camera. This camera, with its weatherproof, rugged construction, is
designed to record animal activity in the outdoors. Your BULLET PROOF 2
Game Camera features a compact, portable size and an extra long battery
life.
Main Features:
• 14MP image resolution
• 720p HD Video (10 sec per clip)
• Compact Size
• Trigger Time=1.0 second or less
• Automatic IR Filter
• 14 Night Vision LEDs
• Supports up to 32 GB SD Card
• Date, Time & Moon Phase Imprint
• Auto Exposure
• Auto White Balance
• Power Supply: 4 AA batteries (lithium or alkaline)
• Mounting Strap Supplied
• Weatherproof
Primos63163WM_14MPBulletProof2Cam_WalmartSMU_1LIM.indd 7 3/8/17 10:32 AM
8
Parts and Controls Guide
Front of Camera
Camera
Lens
PIR Motion
Sensor
Infrared
LED Array
Latch
PIR/Battery Indicator LED Light
Light
Sensor
PIR/Battery Indicator LED:
• Lights when PIR sensor is triggered
during rst 10 sec after power on.
• Lights when capturing photo or video
during rst 3 minutes after power on.
• Blinks to indicate low battery level.
Primos63163WM_14MPBulletProof2Cam_WalmartSMU_1LIM.indd 8 3/8/17 10:32 AM
9
Parts and Controls Guide
Power/Mode
Switch
SD Card Slot
Battery
Compartment
(note orientation for
correct polarity)
+ - + -
+ - + -
Side View
Interior View
(Unlatched)
Operating Status Indicator LED:
• Lights when Timetool software has
nished saving to SD card (see pg. 11).
• Lights while capturing photo or video
(do not switch power o when lit).
• Blinks to indicate SD card is locked or
full (unable to save photos/videos).
Operating Status
Indicator LED Light
Primos63163WM_14MPBulletProof2Cam_WalmartSMU_1LIM.indd 9 3/8/17 10:32 AM
10
BATTERY INSTALLATION
To maximize battery life, you should install a set of 4 AA lithium (for
longest life) or alkaline batteries.
NOTE: Always set the power switch to the OFF position when installing or
removing batteries.
Please make sure the batteries are inserted correctly, as indicated inside
the battery compartment. Incorrect voltage or polarity (+/-) will damage
the camera.
Do not mix old and new batteries.
Do not mix battery types-use ALL lithium or ALL alkaline.
Rechargeable batteries are not recommended.
SD CARD INSTALLATION
Memory
Your BULLET PROOF 2 Game Camera has a memory card slot, to accept
SD cards up to 32 GB max. capacity (not included). When the SD card is full,
the camera will stop capturing images and the Operating Status Indicator
LED will blink.
Inserting an SD card
• Make sure the power switch is in the OFF position whenever adding
or removing memory.
• Insert an SD card into the card slot completely and oriented correctly
as shown by the icon above the slot (label up, contacts facing down
and notched corner on the right).
• To remove the SD memory card, depress the SD card and pull out
the card gently.
Using a new, blank SD card is recommended. If the SD card has been used
in another device, please be sure to do a “full” format (FAT 32) using your
computer before you set the camera to capture photos. If you experience
problems with a new SD card, do a full format from a computer and try
again.
Primos63163WM_14MPBulletProof2Cam_WalmartSMU_1LIM.indd 10 3/8/17 10:32 AM
Ce manuel convient aux modèles suivants
1
Table des matières
Autres manuels Primos Appareil photo numérique
