Primex PXU Series Manuel utilisateur
www.primex.com
PXU Network Switch Series
PXU-1G08 | PXU-1G44 | PXU-1G80
USER MANUAL
Page 2
PACKAGE CONTENTS
Thank you for purchasing a Primex PXU 8-port Network Switch. The
table below shows the models and their configurations.
The PXU Network Switch box should contain the following items:
PXU Network Switch x 1 User Manual x 1
Power Adapter & Power Cord x 1 (PXU-1G44, PXU-1G80)
Power Adapter x 1 (PXU-1G08)
Model Name P/N PoE+ Ports
802.3at
Network
Ports
Power Adapter
PXU-1G08 125-1891 0 8 DC 12V, 0.5A
PXU-1G4 4 125-1892 4 4 DC 54V, 1.33A
PXU-1G80 125-1893 8 0 DC 54V, 2.4A
Page 3
HARDWARE DESCRIPTION
Switch Front View
The front panel of the PXU Network Switch consists of 8 Auto-Sensing
10/100/1000Mbps Ports. LED Indicators are also located on the RJ45
ports that indicate operation status.
PXU Switch Front View (PXU-1G44 shown)
1. Easy-to-read PoE+ power monitoring selection switch.
2. Multi-Mode Standard, VLAN, and extended operation.
3. Front-Facing Power connection for easy access and installation.
4. a) PXU-1G44: 4 RJ45 ports w/PoE on top, 4 RJ45 ports on bottom
b) PXU-1G80: 4 RJ45 ports w/PoE on top, 4 RJ45 ports w/PoE on
bottom
c) PXU-1G08: 4 RJ45 ports on top, 4 RJ45 ports on bottom
1
2
3
4
4
Page 4
LED Indicators
System and Ports
LED Color Function
PWR Green Indicates that the switch has power.
LN K/AC T Green Indicates the link through that port is
successfully established.
Blinks: Indicates that the switch is actively
sending or receiving data over that port.
PoE-in-
Use
Amber Indicates the port is providing DC in-line
power.
Off: Indicates the connected device is not a
PoE powered device (PD).
PoE Power Usage of PXU-1G44 125-1892 (Unit: Watt)
LED Color Function
15 Amber Off PoE usage is less than 7W.
Blinks PoE usage is around 8W to 14W.
Lights PoE usage is over 15-watt PoE
power budget.
30 Amber Blinks PoE usage is around 23W to 29W.
Lights PoE usage is over 30-watt PoE
power budget.
45 Amber Blinks PoE usage is around 38W to 44W.
Lights PoE usage is over 45-watt PoE
power budget.
60 Amber Blinks PoE usage is around 53W to 59W.
Lights PoE usage is at the maximum.
Page 5
PoE Power Usage of PXU-1G80 125-1893 (Unit: Watt)
LED Color Function
30 Amber Off PoE usage is less than 14W.
Blinks PoE usage is around 15W to 29W.
Lights PoE usage is over 30-watt PoE
power budget.
60 Amber Blinks PoE usage is around 45W to 59W.
Lights PoE usage is over 60-watt PoE
power budget.
90 Amber Blinks PoE usage is around 75W to 89W.
Lights PoE usage is over 90-watt PoE
power budget.
120 Amber Blinks PoE usage is around 105W to 119W.
Lights PoE usage is at the maximum.
DIP Switch
The front panel of the PXU Network Switch provides one DIP switch
for Standard, VLAN and Extend mode selections.
Important: Reboot the PXU Network Switch after adjusting the DIP
switch.
DIP Switch Mode Function
Switch operates as a general switch and all
ports operate at 10/100/1000Mbps auto-
negotiation.
Switch operates as a VLAN isolation switch and
•Port 1 to port 6 will isolate respectively.
•Port 1 to port 6 can only communicate with
port 7 and port 8 (uplink port).
Switch operates as a VLAN isolation switch and
•Port 1 to port 6 will isolate respectively.
•Port 1 to port 6 can only communicate with
port 7 and port 8 (uplink port).
•Transmission distance of 250m at speed of
10Mbps.
Standard
VLAN
Extend
Standard
VLAN
Extend
Standard
VLAN
Extend
Page 6
DIP Switch
The front panel of the PXU Network Switch provides one DIP switch
for Standard, VLAN and Extend mode selections.
12V 1A
PXU-1G80
8-Port Gigabit PoE+ Network Switch
P/N 125-1893
VLAN
Standard: all ports connect to the same local network.
12V 1A
PXU-1G80
8-Port Gigabit PoE+ Network Switch
P/N 125-1893
VLAN1
VLAN5
VLAN2
VLAN isolates these
ports from each other
*VLAN isolates
VLAN1-VLAN6 lines
from each other
VLAN6
VLAN3
Internet
Uplink
VLAN4
Uplink
r
Page 7
Physical Dimensions
W x D x H: 6.2 x 1.6 x 5.6 in
PXU-1G80 Shown
Page 8
INSTALLATION
SOHO Pro™Media Panel Installation
To install the PXU Network Switch within a Primex SOHO Pro™ media
panel, simply follow these steps:
Step 1: Locate where in the SOHO Pro™ media panel you would like to
install. Ensure location allows for unobstructed cabling runs.
Visit primex.com/resources/videos/
for full installation video.
Page 9
Step 2: Insert to the top two hooks of the PXU Network Switch into the
mounting holes of the SOHO Pro™ media panel as shown.
Visit primex.com/resources/videos/
for full installation video.
Page 10
Step 3: Engage the bottom hooks of the PXU Network Switch by
pushing up on the unit slightly, slotting in the bottom hooks, then
lowering into locking position.
Visit primex.com/resources/videos/
for full installation video.
Ce manuel convient aux modèles suivants
6
Table des matières
