Prestigio P3223W Manuel utilisateur
1
TABLEOFCONTENTS
Important safety intrstructions………………………………………………………………………………………………………………….。2
1. Introduction …………………………………………………………………………………………………………………………………..。4
1.1 General information …………………………………………………………………………………………………………………………….4
1.2 Features …………………………………………………………………………………………………………………………………………4
1.3 Check the list………………………………………………………………………………. ……………………………………………………5
2. Installing the monitor…………………………………………………………………………………………………………………………….5
2.1 Base installation…………………………………………………………………………………………………………………………………..6
2.2 Wall Mounting with VESA standard…………………………………………………………………………………………………………….7
2.3 Signal Cable Connection………………………………………………………………………………………………………………………….7
2.4Audio cable connection…………………………………………………………………………………………………………………………..7
2.5 Power cord Connection…………………………………………………………………………………………………………………………..7
2.6 Power on ………………………………………………………………………………………………………………………………………….8
2.7 Self test pattern……………………………………………………………………………………………………………………………………8
2.8 Adjust the pictures…………………………………………………………………………. ………………………………………………。….9
3. Operation ……………………………………………………………………………………………………………………………………。…9
3.1 Power ON /OFF Switch ………………………………………………………………………………………………………………………。.9
3.2 Power LED indicator…………………………………………………………………….. …………………………………………………。…9
3.3 OSD control keys…………………………………………………………………………. …………………………………………………。...10
3.4 OSD menu ……………………………………………………………………………………………………………………………………。..10
3.5 Safety mode……………………………………………………………………………………………………………………………………。。14
3.6 Timing guide…………………………………………………………………………………………………………………………………。..14
3.7 Plug play……………………………………………………………………………………………………………………………………。…16
3.8 Power management……………………………………………………………………. ……………………………………………. ……….16
3.9 Volume adjust…………………………………………………………………….…………………………………………………………….16
4 .specification……………………………………………………………………………………………………………………………………..17
5. Simple troubleshooting………………………………………………………………………………………………………………………….19
2
Important Safety Instructions:
1. Read the manual carefully before using the monitor.
2. Save these user manual for later use.
3. Unplug the monitor from the power source when you clean the monitor. Don’t use liquid cleaners or aerosol cleaners.
Use cloth to clean it. If it can’t be done, please use LCD screen cleaners.
4. Don’t use attachments which are not recommended as they may cause hazards.
5. Please grasp the plug to unplug the connector from the wall outlet .Don’t pull the power cord to unplug it.
6. Don’t place anything on the power cord or step on it.
7. Don’t place the monitor near water source such as bathtub, washbowl, sink, laundry tub, swimming pool etc.
8. The slots are designed for ventilation, simultaneously to keep the machinery workable and protect it from overheating.
For the same reason,. please do not place the monitor on the bed, sofa, carpets or other similar surface. Don’t place the
monitor near or over heat source or place in built-in installation.
9. Keep 5 cm away from the wall or other goods.
10. This monitor can only be used the power source indicated on the label. If you have questions, please consult your
dealer.
11. As safety measure, this monitor is equipped with a three-wire ground style plug. If you can’t insert the plug into the
3
outlet, please contact your electrician to replace your outlet. .Don’t defeat the safety purpose of the grounding-type
plug.
12. Please make sure that the outlet and power cord can afford the total electricity of the products.
13. Place the monitors in safe place where the cord will not be abused by persons working on it.
14. Follow all the warning and instructions illustrated on the manual.
15. Don’t overload the wall outlets and extend cords as it can result in fire or electric shocks.
16. Don’t remove or open the cover to service this monitor by yourself. It may expose you to dangerous voltage or other
hazards before all servicing to qualified service personnel.
17. Unplug this monitor from the outlets and refer servicing to qualified service personnel under the following conditions.
● The power cord is frayed or damaged.
● The monitor has been dropped or the cabinet has been damaged.
● When the monitor displays a distinct change it performance, this indicates a need for service.
18. The power cord is the main device to disconnect the power.
19. Unplug the power cord when you do not use it for long time.
20. Place the monitor in good ventilation and protect it from strong light, overheating and damp environment.
21. This monitor must be stored in temperature --20℃-55 ℃ .Otherwise, it may cause permanent damage.
4
1. Introduction
General information
This monitor is a high-performance intelligent multi-scanning color monitor. It is with 20.1 inch TFT LCD panel and
MCU digital control low radiation and glary with built-in power supply. The shape is tiny and thin adapting to small
place, which can save your more places.
Features
● The best working mode: 1680*1050@60 HZ
● Viewable angle: H: 160 V: 160
● Active area: 473。76 mm* 296。10 mm
● Pixel pitch : 0.282 mm *0.2825mm
● Max brightness: 300cd/㎡
● Max contrast: 800:1
● Response time: 5MS
● Color : 16.7 M
● Power saving compliant with EPA ENERGY STAR and VESA DPMS.
● Auto color balance. When it is connected to different graphic adapter, the monitor can calibrate the white and black
5
reference voltage.
● Plug & play, compatible with Windows 9* & ME&NT&2000&XP and VESA DDC1/2B.
Check the list
Please make sure that all of the following items are included before operating the monitor.
■ LCD monitor( include base)
■ Power cord, VGA signal cable ,DVI-D signal cable( optional), Audio cable(optional)，three bolts(there are used to
connect the base and knighthead),Audio cable(optional)
■ User’s manual
If any of the above listed items are missing. Please contact your dealer for technical support.
2. Installing the monitor
Please consider the following advice before you install the monitor.
Position
Choose a place that reflects less to place your monitor.
Generally, there is a suitable angle with a window.
Highness
The peak of the monitor should be a little lower than your eyes when you sit down.
6
Inclination
You will feel comfortable with the sloping screen.
2.1 Base installation( Fig 1)
1. After taking the monitor out of the carton, carefully turn the monitor on front side.
2 .Align the three bollt holes on the base with the three bolt holes on the knighthead of the monitor and screw the bolts with
a screwdriver.
7
2.2 Wall Mounting with VESA Standard(Fig 2)
1. Loose the two bolts with a screwdriver.Then the base and the knighthead can be taken off..In order to prevent the two
bolts from loose, it is better to assemble the fittings on the rear cover of the monitor.
2. Take off the omamental lips and clean up the signal cable, power cord, audio cable.
3. Fix the wall-mounting parts(optional parts according with VESA standard) on the rear cover to mount the monitor on the
wall.
2.3 Signal cable connection
Take off the omamental cover (operation method as Fig 3) and insert the signal cable VGA and DVI port
of a computer.Then lock up the cover with screws to assure full connection to the earth. Insert another
end of signal cable into the corresponding port(VGA or DVI port) snd lock up with screws.
2.4 Audio cable connection
Plug one side of the audio cable into the PC audio port, then plug the other side into the audio port of the monitor
2.5 Power cord connection
Plug one end of the powder cord into the input port of the monitor’s power supply and then insert the other end into the
socket of the electrical source. Assemble the ornamental cover to the rear cover of the monitor.
8
2.6 Power on
Switch on the power to both the monitor and your computer. After the monitor is power on, the LED lights up green or blue.
If the LED becomes red and flashing, please check the video signal cable connection. If the LED is off, please press power
switch slightly.
2.7 Self test pattern
If there is no horizontal or vertical sync signal, your monitor will display Fig 4 to indicate no signal input. After a few
seconds, the monitors will come into waiting and saving power mode; if the monitor receives the video signal, it will return
to the normal mode.
2.8 Adjust the picture
In order to obtain the best visual display, you need to adjust it; please refer to chapter 3 “operation of the monitor”
9
3. Operation
OSD control panel
Fig 5 is model elevation. Other models differ in key-press position and front panel.
3.1 Power on /off switch
This is a slight touch digital control key. it is used to turn the monitor on or off.
3.2 Power LED indicator
When the monitor is working, the power LED is green or blue. If the monitor is in saving power mode, the power LED will
be red and flashing. If you turn off the monitor, the power LED will be off. When the LED off, the monitor is off; but the
monitor is still electrified. In order to make security, you should unplug the power cord while you don’t use the monitor.
3.3 OSD Control keys
3.3.1 Auto key
This key is used to complete auto-adjusting function, it make the monitor to be the best visual display status only in VGA
mode.
3.3.2 +/- key
These two keys will complete navigate right or left and choose the control of the menu function . The adjustment value can
be set directly by +/- key.
10
3.3.3 ←key
Confirmation key can show the menu and complete the confirmation function.
3.4 OSD menu
3.4.1 The meaning of the menu in VGA mode ( Fig 6):
1. Auto adjustment 2. Brightness. 3. Contrast 4. H-position 5. V-position
6. Clock 7. Phase 8. Signal source 9. Color adjustment
10. Volume 11. Sharpness 12. OSD position/ transparence 13. Recall
14. Language 15. Exit 16. Selected function name 17. Resolution
18. H-frequency 19. V-frequency 20. Progressive bar of adjustment
21. Percentage of adjustment 22. Customer LOGO 23. OSD display time
3.4.2 The meaning of the menu in DVI mode( Fig.7)
1. Brightness 2. Contrast 3. Sharpness 4. Volume 5. OSD menu display time
6. Transparence 7. OSD position 8. Signal source 9. 9300 K
10. 7800k
11. 6500 K 12.User 13. Recall 14. Language 15. Exit
16. Selected function name
Table des matières
Autres manuels Prestigio Moniteur
Prestigio
Prestigio P7240W Manuel utilisateur
Prestigio
Prestigio P7240W Manuel utilisateur
Prestigio
Prestigio P575 Manuel utilisateur
Prestigio
Prestigio p392 Manuel utilisateur
Prestigio
Prestigio P575 Manuel utilisateur
Prestigio
Prestigio P391 Manuel utilisateur
Prestigio
Prestigio P3192W Manuel utilisateur
Prestigio
Prestigio P170T Manuel utilisateur
Prestigio
Prestigio P7240WD Manuel utilisateur
Prestigio
Prestigio P1910 Manuel utilisateur
Prestigio
Prestigio P199 Manuel utilisateur
Prestigio
Prestigio TwinScreen 16 Manuel utilisateur
Prestigio
Prestigio PDSIK2CA Manuel utilisateur
Prestigio
Prestigio P177 Manuel utilisateur
Prestigio
Prestigio P151 Manuel utilisateur
Prestigio
Prestigio P7220W Manuel utilisateur
Prestigio
Prestigio P178 Manuel utilisateur
Prestigio
Prestigio P198 Manuel utilisateur
Prestigio
Prestigio P199 Manuel utilisateur
Prestigio
Prestigio P577 Manuel utilisateur
