PREPLINE PSPS40 Manuel utilisateur

PSPS40 / PSPT40

PSPS40 / PSPT40PSPS40 / PSPT40

PSPS40 / PSPT40

User/Technical Manual

Contents subject to change without notice

Version 1.0

04/2021

TABLE OF CONTENTS

TABLE OF CONTENTSTABLE OF CONTENTS

TABLE OF CONTENTS

Introduction

IntroductionIntroduction

Introduction ....................................................................................................................... 1

1 1 General and Safety Information ........................................................................................................................ 1

1 2 Specifications ............................................................................................................................................... 1

Unpacking and setup

Unpacking and setupUnpacking and setup

Unpacking and setup ............................................................................................................ 2

2 1

2 12 1

2 1 Packing List ................................................................................................................................................. 2

2 2

2 22 2

2 2 Assembling .................................................................................................................................................. 3

Display and keypad

Display and keypadDisplay and keypad

Display and keypad .............................................................................................................. 3

3 1

3 13 1

3 1 Faceplate

FaceplateFaceplate

Faceplate .................................................................................................................................................... 3

3 2

3 23 2

3 2 Keypad functions

Keypad functionsKeypad functions

Keypad functions .......................................................................................................................................... 4

3 3

3 33 3

3 3 The meaning of the special displayed character

：

.............................................................................................. 6

OPERATIONS

OPERATIONSOPERATIONS

OPERATIONS ...................................................................................................................... 7







Normal Weighing Mode

Normal Weighing ModeNormal Weighing Mode

Normal Weighing Mode .......................................................................................................... 7







ZERO funct

ZERO functZERO funct

ZERO function

ionion

ion ..................................................................................................................... 7







Setting the Tare Weight

Setting the Tare WeightSetting the Tare Weight

Setting the Tare Weight .......................................................................................................... 7







Save function

Save functionSave function

Save function ...................................................................................................................... 8







Print function

Print functionPrint function

Print function ...................................................................................................................... 8







Input the unit price directly

Input the unit price directlyInput the unit price directly

Input the unit price directly ..................................................................................................... 9







Set and Recall direct and indirect PLU

Set and Recall direct and indirect PLUSet and Recall direct and indirect PLU

Set and Recall direct and indirect PLU ........................................................................................ 9







Recall direct PLU

Recall direct PLURecall direct PLU

Recall direct PLU ............................................................................................................... 10







Recall indirect PLU

Recall indirect PLURecall indirect PLU

Recall indirect PLU ............................................................................................................. 10

LCD contr

LCD contrLCD contr

LCD contrast and Backlight mode setting

ast and Backlight mode settingast and Backlight mode setting

ast and Backlight mode setting .................................................................................. 10

Auto

AutoAuto

Auto-

-off time setting

off time settingoff time setting

off time setting ........................................................................................................... 10

Display A/D inner code and working voltage

Display A/D inner code and working voltageDisplay A/D inner code and working voltage

Display A/D inner code and working voltage .............................................................................. 10

The details about RS232 communication

The details about RS232 communicationThe details about RS232 communication

The details about RS232 communication .................................................................................. 11

Date and time setting

Date and time settingDate and time setting

Date and time setting .......................................................................................................... 14

1010

Business name setting

Business name settingBusiness name setting

Business name setting ........................................................................................................ 14

1111

Key function in the trade name or business name setting mode

Key function in the trade name or business name setting modeKey function in the trade name or business name setting mode

Key function in the trade name or business name setting mode ...................................................... 14

1212

ID ID

ID setting

settingsetting

setting ........................................................................................................................ 14

1313

OSOS

OS-

-2130D Back Feed setting

2130D Back Feed setting2130D Back Feed setting

2130D Back Feed setting ................................................................................................ 15

1414

OSOS

OS-

-203/213 Origin setting

203/213 Origin setting203/213 Origin setting

203/213 Origin setting ................................................................................................... 15

1515

PSPT40U uPSPT40oad and download

PSPT40U uPSPT40oad and downloadPSPT40U uPSPT40oad and download

PSPT40U uPSPT40oad and download ...................................................................................... 15

16.

Calibration

CalibrationCalibration

Calibration ....................................................................................................................... 19

1717

The meaning of some disPSPT40ayed symbols

The meaning of some disPSPT40ayed symbolsThe meaning of some disPSPT40ayed symbols

The meaning of some disPSPT40ayed symbols .......................................................................... 20

1818

Troubleshooting and Battery Charging

Troubleshooting and Battery ChargingTroubleshooting and Battery Charging

Troubleshooting and Battery Charging ..................................................................................... 21

Troubleshooting

TroubleshootingTroubleshooting

Troubleshooting ..................................................................................................................................................... 21

Battery and Charging

Battery and ChargingBattery and Charging

Battery and Charging .............................................................................................................................................. 22

PSPS40 / PSPT40 .

1 .

1 Introduction

IntroductionIntroduction

Introduction

1 1 General and Safety Information

 For use in dry environments only

 Read and understand all operating instructions before using this product Keep this manual for future

reference

 Allow sufficient warm up time Turn the scale on and allow up to 3 minutes for internal components to stabilize before

weighing

 Record the weight shortly after placing a load on the platter Leaving loads in place for extended periods may vary the

load cell’s output signature and may result in a less accurate reading

 Avoid extended exposure to extreme heat or cold Optimum operation is at normal room temperature See operating

temperature range in the specifications table Allow the scale to acclimate to room temperature before using

 When storing the scale for extended periods, the battery must be charged every 60 days to avoid premature

performance degradation If the operating time is no longer acceptable even after recharging, the battery must be

replaced

 Electronic scales are precision instruments Do not operate near cell phones, radios, computers or other electronic

devices that emit radio frequencies that may cause unstable readings

1 2 Specifications

Model

PSPS06

PSPT06

PSPS15

PSPT15

PSPS30

PSPT30

PSPS40

PSPT40

PSPS60

PSPT60

Capacity

3kg 6kg 15kg 20kg 30kg

6lb 15lb 30lb 40lb 60lb

96oz 240oz 480oz 640oz 960oz

Division

0-1.5kg: 0.5

1.5-3kg: 1g 0-3kg:1g

3-6kg:2g

0-6kg: 2g

6-15kg: 5g

0-10kg:5g

10-20kg:10g

0-15kg:5g;

15-30kg:10g

0-3lb: 0.001lb

3-6lb: 0.002lb

0-6lb:0.002lb

6-15lb:0.005lb

0-15lb:0.005lb;

15-30lb:0.01lb

0-20lb:0.01lb

20-40lb:0.02lb

0-30lb: 0.01lb;

30-60lb:0.02lb

0-48: 0.02oz

48-96: 0.05oz

0-96oz:0.05oz

96-240oz:0.1oz

0-240oz:0.1oz;

240-480oz:0.2oz

0-320oz:0.2oz

320-640oz:0.5oz

0-480oz:0.2oz;

480-960oz:0.5oz

Min eight

10g / 0.02lb /

0.4oz

20g / 0.04lb /

1oz

40g / 0.1lb /

2oz

100g / 0.2lb /

4oz

100g / 0.2lb /

4oz

Tare range

-1.5kg -3kg -6kg -10kg -15kg

-3lb -6lb -15lb -20lb -30lb

-48oz -96oz -240oz -320oz -480oz

Max eight

3.009kg 6.018kg 15.045kg 20.09kg 30.09kg

6.018lb 15.045lb 30.09lb 40.18lg 60.18lb

96.45lb 240.9oz 481.8oz 644.5oz 964.5oz

Po er-on zero

range

calibration

zero point

-10 ~+10

calibration zero

point

-10 ~+10 FS

calibration

zero point

-5 ~+10 FS

calibration

zero point

-3 ~+10 FS

calibration

zero point

-1.5 ~+10 F

Zero Key rang

power-on zero ±1.5 FS

Interface RS232, USB

PSPS40 / PSPT40 .

2 .

Max

memory(PLU)

PSPS Series: 265 Including direct PLU :M1~M5

PSPT Series: 265 Including direct PLU: M1-M55

Scale dimension PSPS Series: 290(L)x350(D)x115(H)mm

PSPT Series: 290(L)x387(D)x450(H)mm

LCD display 18 digits

：

6 digit for weight reading

，

6 digit for unit price

，

6 digit for total price

Unit price range 0.00 – 9999.99 $/kg or $/lb

Total price range 0-999.99$

Working temp. 0

℃

～

℃

Po er supply 1)12Vdc,500mA with positive center, AC adaptor or 6Vdc4AH lead-acid battery.

2)Average working current is about 45mA(excluding recharge current)

3)When using AC adaptor, the lamp of “A.C.ADP” is on. When charging the battery, the

lamp of “CHARGE” is on.

Rechargeable

battery life

80 hours continuous use when backlight is off with 12 hour recharge time

30 hours continuous use when backlight is on with 12 hour recharge time

(when the battery voltage is below 5.6v, “Lo.bat” is displayed, and beep for 10 seconds

and then auto off.)

Platter size: LxD: 288x210

2 Unpacking and setup

Unpacking and setupUnpacking and setup

Unpacking and setup

 Take out the scale from the box and place it on a firm, level surface Avoid locations with rapid temperature changes,

excessive dust, moisture, air currents, vibrations, electromagnetic fields, heat or direct

sunlight

 Adjust the leveling feet until the bubble is centered in the circle of the level indicator

(located on the front panel)

NOTE

NOTENOTE

NOTE: Ensure that the scale is level each time its location is changed

 Before using the scale for the first time, the internal rechargeable battery should be fully charged for up to 12 hours

 Connect the supplied AC adapter to the power input receptacle underneath the scale Plug the AC adapter into a

properly grounded power outlet and the battery will begin charging

 If the scale will be stored or transported in the future, save the packaging material to ensure the best possible

protection for the scale

2 1

2 12 1

2 1 Packing List

 Scale

 Tower assembly (PSPT40 only)

 Manual

 12Vdc/500mA adapter

 Weighing platforms (one plastic platform +one stainless steel platform)

PSPS40 / PSPT40 .

3 .

2 2

2 22 2

2 2 Assembling

PSPS40: Install the weighing platforms onto the base, with the pan properly aligned

PSPT40: Follow below procedure to install the tower display

1 Pass the socket on bottom of scale base through the pole bracket, and plug it to the connector

2 Connect the column to the base and tighten them together with the hexagon socket head cap screws

3 Place the connector in the bracket, put on the cover and fix it with tapping screws

4 Installation is complete

No item

1 Scale base

Hexagon socket

head cap screws

(3pcs)

3 Cover

4 Tapping screws

(2pcs)

5 Column

6 Connector

7 socket

3 Display and keypad

Display and keypadDisplay and keypad

Display and keypad

3 1

3 13 1

3 1 Faceplate

Faceplate Faceplate

Faceplate

 Front Display

PSPS40 / PSPT40 .

4 .

 Rear Display

WEIGHT

WEIGHT WEIGHT

WEIGHT -

Weight display window

 Zero

ZeroZero

Zero - Scale is zeroed, gross weight is 0, tare is 0



Tare

Tare Tare

Tare -

Dis

DisDis

Display reading is net weight; tare is not

notnot

not 0

 SAVE

SAVE SAVE

SAVE -

Unit price fixing indicator



kg/

g/g/

g/lb

lblb

lb/oz

/oz/oz

/oz - Weight unit indicator

UNIT PRICE

UNIT PRICE UNIT PRICE

UNIT PRICE -

Unit price display window



$/$/

$/kg,

kg,kg,

kg,$/

$/$/

$/lb

lblb

lb, $oz

, $oz, $oz

, $oz -

Unit price per kg/lb/oz indicator

TOTAL PRICE($)

TOTAL PRICE($)TOTAL PRICE($)

TOTAL PRICE($) -

Total price display window

 PRINT

PRINTPRINT

PRINT -

Data output indicator

 AC

ACAC

AC -

AC Adapter in-use indicator



Charge

ChargeCharge

Charge -

Battery being charged

indicator

3 2

3 23 2

3 2 Keypad functions

Keypad functionsKeypad functions

Keypad functions

 PSPS40 keypad

PSPS40 / PSPT40 .

5 .

 PSPT40 keypad

 0

-9:

9: 9:

9: Numeric keys, used to enter numerical data or alphabets

 M1

M1M1

M1-

-M5:

M5:M5:

M5: Direct PLU keys, used to directly recall the stored unit price

 M6

M6M6

M6-

-M55:

M55: M55:

M55: Direct PLU keys, used to directly recall the stored unit price (only for PSPT40)

 CLEAR

CLEARCLEAR

CLEAR: Used to clear the recorded data

 ENTER

ENTERENTER

ENTER: Used to confirm the operation or entered data

 SAVE

SAVESAVE

SAVE: Save the tare weight and unit price when input the unit price, so that the data will not be cleared after one

weighing operation

 ZERO

ZEROZERO

ZERO: Used to set the zero point after the scale is stable, the range is “power-on zero point±1 5%FS”

 TARE

TARETARE

TARE: Used to tare the weigh, When total weight is 0, tare weight is cleared, NET

NETNET

NET indicator is off

 STPLU

STPLUSTPLU

STPLU: Ready to enter indirect store mode (PLU)

 RC PLU

RC PLURC PLU

RC PLU: Ready to enter indirect recall mode (PLU)

 PRINT

PRINTPRINT

PRINT: Used to output the data when has RS232 hardware

 UNIT

UNITUNIT

UNIT: Switch the unit of price and weight

 ON/OFF

ON/OFFON/OFF

ON/OFF: When the display is off, press O

N/O

/O/O

/OFF

FFFF

FF key to turn on the scale When the display is on, press O

N/O

/O/O

/OFF

FFFF

key for

3s to turn off the scale Or the O

N/O

/O/O

/OFF

FFFF

FF key is used to exit the current mode

 ON/OFF+0

ON/OFF+0ON/OFF+0

ON/OFF+0:

: :

: Used to enter the business’s name setup mode

 ON/OFF

ON/OFFON/OFF

ON/OFF+1

1: Used to enter the LCD’s contrast setup mode

 ON/OFF

ON/OFFON/OFF

ON/OFF+2

2: Used to enter the auto-off time setup mode

 ON/OFF

ON/OFFON/OFF

ON/OFF+3

3: Used to display A/D inner code or working voltage

 ON/OFF

ON/OFFON/OFF

ON/OFF+4

4: Used to enter RS232 parameters setup mode

 ON/OFF

ON/OFFON/OFF

ON/OFF+5

5: Used to enter the date and time setup mode

 ON/OFF

ON/OFFON/OFF

ON/OFF+6

6: Used to enter ID setup mode

 ON/OFF

ON/OFFON/OFF

ON/OFF+7

7: Used to enter OS-2030D Back Feed setup mode (If “232 out” is set to “HOST”, this setting is invalid)

 ON/OFF

ON/OFFON/OFF

ON/OFF+8

8: Used to enter OS-2030D Origin setup mode (If “232 out” is set to “HOST”, this setting is invalid)

PSPS40 / PSPT40 .

6 .

3 3

3 33 3

3 3 The meaning of the special displayed character：

Symbol

SymbolSymbol

Symbol

segments digit

segments digitsegments digit

segments digit

Symbol

SymbolSymbol

Symbol

segments di

segments disegments di

segments di

git

gitgit

git

Symbol

SymbolSymbol

Symbol

segments digit

segments digitsegments digit

segments digit

0 A N

1 B O

2 C P

3 D Q

4 E R

5 F S

6 G T

7 H U

8 I V

9 J W

( K X

) L Y

M Z

À Â Æ

Ç È É

Ê Ë Î

Ï Ô Ù

Û Ü

PSPS40 / PSPT40 .

7 .

4 OPERATIONS

OPERATIONS OPERATIONS

OPERATIONS

 Normal Weighing Mode

Normal Weighing ModeNormal Weighing Mode

Normal Weighing Mode

1 Place the scale on a flat, stable surface Level the scale using the leveling bubble at the lower left side of the display

2 With the weighing platter empty, turn on power switch (located underneath on the right-hand side of the scale) Due

to the high resolution of this scale, allow 10 minutes for the scale to warm up before use for optimum results

3 Press the ON/OFF key to power on the scale The self-check will run and the scale will display a zero reading The

scale is now ready for weighing

Note: If the scale does not zero, an error code will be displayed See Troubleshooting

TroubleshootingTroubleshooting

Troubleshooting to resolve

4 To change the weighing unit of measure, press the Unit key to toggle between kg, lb or oz

5 Set the tare weight if desired

6 Place objects on the scale platter and read the weight on the indicator

7 When finished weighing, press the ON/OFF key for 4 seconds to power off the scale

 ZERO function

ZERO functionZERO function

ZERO function

1 Under the normal weighing mode, press Zero key to set the scale to zero point when the scale reading is stable

(the

weighing unit light without shining)

2 When under the tare mode, ZERO key is invalid

Note: If the scale cannot be zeroed, an error code will be displayed See Troubleshooting

TroubleshootingTroubleshooting

Troubleshooting to resolve

 Setting the Tare

Setting the Tare Setting the Tare

Setting the Tare Weight

WeightWeight

Weight

This scale allows for both a manually entered pre-set tare weight, as well as a “weighed” tare weight

1 To enter a weighed tare:

To enter a weighed tare: To enter a weighed tare:

To enter a weighed tare:

a Place an empty container on the platter and press the Tare key

The display will return to zero, eliminating

the weight of the container The Zero

ZeroZero

Zero light will go off and the Tare

TareTare

Tare light will be lit

Note

NoteNote

Note: The gross weight must be positive to enter a weighed tare

b To clear the weighed tare, remove all weight from the scale The display will show a negative weight Press

the TARE key to return the display to zero, eliminating the weight of the container The Tare

TareTare

Tare light will go off

and the Zero

ZeroZero

Zero light will be lit

2 To

To To

To manually enter a known tare:

manually enter a known tare:manually enter a known tare:

manually enter a known tare:

a Use the number keys to input the tare weight Your entry will be displayed in the “WEIGHT” display window

Then press the Tare key to confirm or press the ON/OFF key to exit and not confirm

Example

ExampleExample

Example: With the platter empty, entering 100g and pressing the Tare key will display “

““

“











” kg

b To recall the previously stored tare weight, press the RC PLU key Press the ON/OFF key to return to

weighing

Note

NoteNote

Note: The previously stored tare weight can only be recalled with the RC PLU key when in tare setting

mode

c To clear the manually entered tare weight, (enter “0” and) press the Tare key to confirm

d If unit price is in un-saved mode, the tare weight and unit price will be auto cleared after transaction and

objects being moved

PSPS40 / PSPT40 .

8 .

 Save

Save Save

Save function

functionfunction

function

1 Under non-save mode, tare and unit price will be cleared automatically; Press SAVE key to enter save mode

2 Under save mode, tare and unit price will not be cleared automatically; Press SAVE key to exit save mode, if the

gross weight is 0, clear tare weight and unit price

 Print function

Print functionPrint function

Print function

In normal weighing mode, when the scale reading is stable (The weighing unit light without flashing), press PRINT key to

output the data via RS232 or USB serial port according to the set method Print format are as follows:

1 1

1 Print Out format in HOST mode

Print Out format in HOST modePrint Out format in HOST mode

Print Out format in HOST mode

ID: xxxxxx

Date: yy-mm-dd

Time: hh:mm

Gross: xxxx xxx kg/lb

Tare: xxx xxx kg/lb

Net: xxxx xxx kg/lb

Unit Price: xxxxxx xx $/kg($/lb)

Total Price: xxxxxx xx $

==========================

2 2

2 Print out format when OS

Print out format when OSPrint out format when OS

Print out format when OS-

-2130D

2130D2130D

2130D

printer is connected

printer is connectedprinter is connected

printer is connected

(example):

(example):(example):

(example):

Label dimension is 58mm × 40mm Label dimension is 58mm × 60mm

3 Content of printed out:

3 Content of printed out:3 Content of printed out:

3 Content of printed out:

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels PREPLINE Échelle

PREPLINE

PREPLINE PSP40 Manuel utilisateur

PREPLINE

PREPLINE PSP20 Manuel utilisateur

Manuels Échelle populaires d'autres marques

AWS

AWS ZEO-50 Manuel utilisateur

Gima

Gima Glass Body Fat Analyzer Manuel de la liste des pièces

Seca

Seca 374 Manuel utilisateur

TEC

TEC TEC SL59 SERIES Manuel utilisateur

Axis

Axis B/E Series Manuel utilisateur

Alecto

Alecto ACW-40 Manuel utilisateur

Rice Lake

Rice Lake MSI-4260 IS Manuel utilisateur

IKA

IKA RCT basic safety control Manuel utilisateur

ADE

ADE M20011 Manuel utilisateur

Duronic

Duronic KS3000 Manuel utilisateur

Digi

Digi SM-720 Manuel utilisateur

Cardinal

Cardinal CS Series Manuel utilisateur

Korona

Korona Kastella Manuel utilisateur

A&D

A&D FC-50Ki Manuel utilisateur

BDA

BDA CAMARGUE Manuel utilisateur

Tanita

Tanita HD-357 Manuel utilisateur

Leifheit

Leifheit 03173 Manuel utilisateur

Lumme

Lumme LU-1340 Manuel utilisateur