Operation
Operation Operation
Operation
1.
1.1.
1. Power on
Power on Power on
Power on
With the scale unloaded, press the ON/TARE button. When 0 is displayed, the scale is ready
to weigh.
2.
2.2.
2. Switching units
Switching units Switching units
Switching units
Press the MODE button to change the unit of measurement from kg, g to lb/oz.
3.
3.3.
3. Taring Function
Taring Function Taring Function
Taring Function
Place an empty container on the platform and press the ON/TARE button, the display will
return to zero.
Place the material or object to be weighed in the container, the net weight is displayed.
To exit the tare mode, remove all weight from the scale. A negative weight will appear on
the display. Press the ON/TARE button to reset the display to zero and clear the weight of
the container.
4.
4.4.
4. Weighing
WeighingWeighing
Weighing
Place the weight on the scale as centrally as possible.
After switching on the scale with the “ON/TARE“ button, all segments are shown on the
display. Please wait until the zero appears, then place the weight on the scale and read off
the shown weight..
5.
5.5.
5. Auto
Auto Auto
Auto -
--
-
switch
switchswitch
switch-
--
-off
off off
off
To save the battery life, the scale provides auto-off function when there is no operation to
the scales in 90 seconds.
6.
6.6.
6. Counting
CountingCounting
Counting
6.1 Power on the scale and wait the display showing “0”, put (25, 50, 75, 100) objects as
sampling to weigh. When the reading is stable, press the button “PCS” to choose the
correspondingly sampling quantity (25P, 50P, 75P, 100P), then press “ON/TARE”, the
showing quantity should equal to the chosen sampling quantity and the “C” will be shown,
indicating sampling successful.
Note The weight of single object should≥2.5d（d=division）, otherwise the sampling would
not be workable.
6.2 Now you can add many same objects for weighing and counting.
6.3 After set up the counting quantity, press “PCS” to switch counting and weighting function.
