IMPORTANT SAFETY INSTRUCTIONS
To reduce the risks associated with the use of impact wrenches:
•Read, understand and follow the safety information contained in these instructions prior to using
this tool. Keep these instructions for further reference.
•Only properly trained personnel should service this tool. Any other service will void warranty.
• Practice safety requirements - work alert and do not operate tools under the influence of alcohol or
drugs.
• Operators and nearby personnel must always wear protection for eyes and ears when in the work
area or while operating this product. Follow your employer’s safety policy for PPE’s and/or ANSI
Z87.1 or local/national standards for eyewear and other personal protective equipment require-
ments.
• Never exceed marked maximum input pressure (90psi / .62Mpa / 6.2Bars).
• Proper eye protection must be worn at all times.
• Tool shall not be operated in the presence of bystanders.
• If you notice any abnormal noise or vibration when operating the product, immediately discontinue
its use and inspect for worn or damaged components. Correct or replace the problem component. If
the problem persists, return the tool to PTA Canada for repair or replacement. Please refer to war-
ranty instructions
• Make sure the tool is disconnected from its air source before servicing, inspecting, maintaining,
cleaning, and before changing impact product.
WARNING
www.premiumtool.com
PTA Canada 10761 - 181 ST NW Edmonton, AB, Canada T5S 1N3
RISKS PREVENTION
Vibration • If any physical discomfort is experienced, work should be stopped
promptly to seek medical attention. Injury may result from repetitive work,
motion and exposure to excessive vibration.
Loud Noise • Always wear protection for eyes and ears while operating this product.
Follow your employer’s safety policy for PPE’s and/or ANSI Z87.1 or local/
national standards for eyewear and other personal protective equipment
requirements..
Fire or Explosion • Do not operate the tool in explosive atmospheres, such as in the
presence of ammable liquids, gases, or dust.
Hazardous Voltage • Do not allow this tool to come into contact with electrical power sources
as the tool is not insulated against electrical shock.
Skin Abrasion/Burns/
Cuts/Entrapment
• Keep hands, hair, and clothing away from the rotating part of the tool.
• Wear suitable protective gloves while operating tool.
• Do not touch the rotating parts during operation for any reason.
• Do not force tool or use excessive force when using tool.
Hazardous Pressure
Rupture
• Be aware that incorrectly installed hoses and ttings might unexpectedly
come loose at any time and create a whipping/impact hazard.
PRODUCT CONFIGURATION / SPECIFICATIONS
PART
NO.
DRIVE
in.
STYLE TORQUE
ft-lbs
(N-M)
SPEED
rpm
PRODUCT
NET WT.
lb. (kg.)
BOLT
CAPACITY
in.
AIR
CONSUMPTION
cfm
INLET
in.
HOSE
SIZE
in.
(mm)
P1028 3/8 Aluminum
Mini 400 (540) 9,000 3.5 (1.6) 5/8 (16) 5.8 1/4 3/8 (10)
P1030 1/2 Composite 1,000 (1,357) 7,500 4.4 (2.0) 3/4 (19) 10.2 1/4 3/8 (10)
P1038 1/2 Aluminum
Mini 500 (680) 9,000 3.5 (1.6) 5/8 (16) 5.8 1/4 3/8 (10)
P1060 3/4 Composite 1,400 (1,900) 5,500 7.5 (3.4) 1-1/4 (32) 9.5 3/8 3/8 (10)
P1080 1 Composite 2,500 (3,390) 4,800 17.2 (7.8) 1-3/4 (44) 9.0 1/2 1/2 (13)
P1180 1 Composite 2,200 (2,980) 5,000 17.86 (8.1) 1-3/4 (44) 9.0 1/2 1/2 (13)
